Panasonic Industry ／ 制御機器
MENU
Panasonic Industry ／ 制御機器

SF4D-H36｜安全光柵[Type4 PLe SIL3] SF4D

下載

※ 實際商品可能與照片不同。

適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質

品名

SF4D-H36

型號

SF4D-H36

產品

Safety Light Curtain [Type 4 PLe SIL3]

詳細

Min. sensing object ø25 mm ø0.984 in (20 mm 0.787 in beam pitch)

商品名稱

 安全光柵[Type4 PLe SIL3] SF4D

聯繫我們

※為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。

詳細規格

為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。
項目內容
品名SF4D-H36
型號SF4D-H36
產品名Safety Light Curtain [Type 4 PLe SIL3]
No. of beam channels36
Protective height710 mm
27.953 in
(Note): When using as a safety device for a press machine in China, the length from the center of the first beam channel to the center of the last beam channel become to be protective height.
Protective height : When using as safety equipment for Chinese press machine700 mm
27.559 in
(Note): When using as a safety device for a press machine in China, the length from the center of the first beam channel to the center of the last beam channel become to be protective height.
Current consumptionEmitter : 120 mA or less
Receiver : 130 mA or less
PFHD2.04×10-9
MTTFD591 years or more
Weight(Total of emitter and receiver)1,700g approx.
Applicable standards:International standardIEC 61496-
1/2 (Type 4), ISO 13849-
1 (Category 4, PLe), IEC 61508-1 to 7 (SIL3)
Applicable standards:JapanJIS B 9704-1/2 (Type 4), JIS B 9705-1 (Category 4), JIS C 0508-1 to 7 (SIL3)
Applicable standards:EuropeEN ISO 13849-1 (Category 4, PLe), EN 55011, EN 61000-6-2, EN IEC 63000
Applicable standards:North AmericaANSI/UL 61496-1/2 (Type 4),CAN/CSA C22.2 No.14, CAN/CSA E61496-1/2
Applicable standards:ChinaGB/T 4584
Applicable regulations and certificationsCE Marking (Machinery Directive, EMC Directive, RoHS Directive) , TÜV SÜD certification,TÜV SÜD NRTL certification (U.S.A., Canada), OSHA 1910.212, OSHA 1910.217(C), ANSI B11.1 to B11.19, ANSI/RIA 15.06, Korea KCs mark
Operating rangeShort mode : 0.2 to 9 m 0.656 to 29.528 ft
Long mode : 0.8 to 15 m 2.625 to 49.213 ft
(selectable by DIP switch)
(Note): The operating range is the possible setting distance between the emitter and the receiver.
Min. sensing objectø25 mm ø0.984 in opaque object
(Note): When the floating blanking function is used, the size of the minimum sensing object varies. For the detail, refer to the section on Safety distance.
Effective aperture angle±2.5° or less at a sensing range of 3 m 9.843 ft or longer (based on IEC 61496-2)
Power voltage24 V DC+20-30 % Ripple P-P 10 % or less (excluding voltage drop due to cable)
(Note): In consideration of the voltage drop caused by the cable, use Control output (OSSD 1, OSSD 2) source / sink current and cable length as a guideline.
Control outputs (OSSD 1, OSSD 2)PNP open-collector transistor / NPN open collector transistor (selectable)

<PNP output selected>
・Maximum source current : 350 mA
・Applied voltage : Same as supply voltage
(between control output and +V)
・Residual voltage : 2 V or less (source current 350 mA)
(excluding voltage drop due to cable)
・Leakage current : 0.2 mA or less (including power OFF state)
・Maximum load capacity : 2.2 μF
・Load wiring resistance : 3 Ω or less

<NPN output selected>
・Maximum sink current : 350 mA
・Applied voltage : Same as supply voltage
(between control output and 0 V)
・Residual voltage : 2 V or less (sink current 350 mA)
(excluding voltage drop due to cable)
・Leakage current : 0.2 mA or less (including power OFF state)
・Maximum load capacity : 2.2 μF
・Load wiring resistance : 3 Ω or less
Control outputs (OSSD 1, OSSD 2):Operation modeON when all beams are received, OFF when one or more beams are blocked
(Also OFF when internal sensor error or synchronization signal error occurs)
(Note): The setting can be changed when the SF4D-TM1 (optional) and Configurator Light Curtain setting software are used.
Control outputs(OSSD1, OSSD2):Protection circuitIncorporated
Control output(OSSD 1, OSSD 2):Response timeOFF response : 10 ms or less (Not connected in series / parallel), 18 ms or less (Connected in series / parallel)(Note 1)
ON response : 50 ms or less (Note 2)(Note 3)
(Note 1): For response times by number of beams, refer to the Control output (OSSD 1, OSSD 2) OFF response times.
(Note 2): Because the control output (OSSD 1, OSSD 2) must be OFF for at least 80 ms, the ON response will be delayed more than 50 ms when the light blocked time is less than 30 ms.
(Note 3): When optical synchronization is selected, if the beam axes of both the top end and bottom end are blocked, the ON response speed decreases by as much as 1 sec.
Auxiliary output (AUX)(Non-safety output)PNP open-collector transistor / NPN open collector transistor (selectable)

<PNP output selected>
・Maximum source current : 60 mA
・Applied voltage : Same as supply voltage
(between auxiliary output and +V)
・Residual voltage : 2 V or less (source current 60 mA)
(excluding voltage drop due to cable)
・Leakage current : 0.2 mA or less (including power OFF state)

<NPN output selected>
・Maximum sink current : 60 mA
・Applied voltage : Same as supply voltage
(between auxiliary output and 0 V)
・Residual voltage : 2 V or less (sink current 60 mA)
(excluding voltage drop due to cable)
・Leakage current : 0.2 mA or less (including power OFF state)
Auxiliary output (AUX)(Non-safety output) : Operation modeControl output ON : OFF, Control output OFF : ON
(Note): The setting can be changed when the SF4D-TM1 (optional) and Configurator Light Curtain setting software are used.
Auxiliary output (AUX)(Non-safety output) : Protection circuitIncorporated
Auxiliary output (AUX)(Non-safety output) : Response timeOFF response : 60 ms or less, ON response : 60 ms or less
Synchronization methodLine synchronization / optical synchronization (selectable by DIP switch)
Interference prevention function<Not connected in series/parallel>
・Line synchronization : 2 units or less (auto)
・Optical synchronization : 2 units or less (selectable by DIP switch)

<Connected in series/parallel>
・Series connection : 5 units or less (total number of beam channels 256 or less)
・Parallel connection : 3 units or less (total number of beam channels 192 or less)(Note)
・Series / parallel connection mixed : 5 units or less (total number of beam channels 144 or less)(Note)
(Note): The setting can be changed when the SF4D-TM1 (optional) and Configurator Light Curtain setting software are used.
Test input functionIncorporated
Interlock functionIncorporated [Manual reset / auto reset (selectable by wiring)] (8-core cable or 12-core cable)
Lockout release functionIncorporated
External device monitoring functionIncorporated (8-core cable or 12-core cable)
Application indicator functionIncorporated (only the receiver lights up when optical synchronization is used)
Muting functionIncorporated (12-core cable)
Override functionIncorporated (12-core cable)
Power save functionIncorporated
Optional functionsFixed blanking function, floating blanking function, interlock setting function, external device monitoring setting function, auxiliary output setting
function, application indicator setting function, muting setting function, override setting function, protect function, cable switching function
(Note): To use optional functions, the SF4D-TM1 (optional) and Configurator Light Curtain setting software are required.
Pollution degree3
Operating altitude2,000 m 6,561.68 ft or less
(Note): Do not use or store in an environment pressurized to atmospheric pressure or higher at an altitude of 0 m.
Environmental resistance:Degree of protectionIP67, IP65 (IEC), NEMA Type 13 (NEMA 250)
Environmental resistance:Ambient temperature-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage : -25 to +60 ℃ -13 to +140 ℉
Environmental resistance:Ambient humidity30 to 85 % RH, Storage : 30 to 95 % RH
Ambient illuminanceIncandescent light : 5,000 ℓx or less at the light-receiving surface
Environmental resistance:Voltage withstandability1,000 V AC for one minute, between all supply terminals connected together and enclosure
Environmental resistance:Insulation resistance20 MΩ, or more, with 500 V DC megger, between all supply terminals connected together and enclosure
Environmental resistance:Vibration resistance10 to 55 Hz, 0.75 mm 0.030 in double amplitude in X, Y, and Z directions for two hours each
Malfunction resistance 10 to 55 Hz, 0.75 mm 0.030 in double amplitude in X, Y, and Z directions twenty times each
Environmental resistance:Shock resistance300 m/s2 acceleration (30 G approx.) in X, Y, and Z directions three times each
Malfunction resistance 100 m/s2 acceleration (10 G approx.) in X, Y, and Z directions 1,000 times each
SFF (Safe Failure Fraction)99%
HFT (Hardware Fault Tolerance)1
Subsystem typeType B (IEC 61508-2)
T1 (proof test interval)20 years
Failure response timeWithin response time (OFF response)
Safety stateControl output (OSSD 1 / 2) OFF state
Emitting elementInfrared LED (peak emission wavelength : 850 nm 0.0335 mil)
MaterialEnclosure : Aluminum, Detection surface : Polycarbonate resin and stainless steel (SUS304), Upper cap / lower cap : Nylon
Connecting methodBy connector
Cable extensionTotal length of emitter / receiver can be extended up to 70 m 229.659 ft each using optional mating cable (including the length
of series mating cables)
(Note): In consideration of the voltage drop caused by the cable, use Control output (OSSD 1, OSSD 2) source / sink current and cable length as a guideline.
AccessoriesSF4B-TR25 (test rod) : 1 pc.
RemarkWhere measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉.
PFHD : Probability of Dangerous Failure per Hour, MTTFD : Mean Time to Dangerous Failure (in years).

MENU

最近搜尋過的產品

最近搜尋過的產品型號