SH-61R|薄型・自動靈敏度設定光電感測器[放大器分離] SU-7/SH(已停產)
停止接單
停產時期 (JST)

※ 實際商品可能與照片不同。
適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質
詳細規格
項目 | 內容 |
---|---|
品名 | SH-61R |
型號 | SH-61R |
Applicable amplifiers | SU-7 series |
Sensing range | 2.5 m 8.202 ft [5 to 80 mm 0.197 to 3.150 in when mounted on optional mounting bracket (MS-SH6-2) and used as convergent reflective type (Conv. point: 25 mm 0.984 in) (Note)] Note : The sensing range and the hysteresis for the chemical resistant type sensor used in the convergent reflective mode is specified for white non-glossy paper (150 x 150 mm 5.906 x 5.906 in) as the object. |
Sensing object | Min. ø5 mm ø0.197 in opaque object [Min. ø1 mm ø0.039 in steel wire when mounted on optional mounting bracket (MS-SH6-2) and used as convergent reflective type (with 25 mm 0.984 in setting distance and at the max. sensitivity)] |
Hysteresis | - [15 % or less of operation distance when mounted on optional mounting bracket (MS-SH6-2) and used as convergent reflective type.(Note)] Note : The sensing range and the hysteresis for the chemical resistant type sensor used in the convergent reflective mode is specified for white non-glossy paper (150 x 150 mm 5.906 x 5.906 in) as the object. |
Repeatability(perpendicular to sensing axis) | 0.1 mm 0.004 in or less [0.1 mm 0.004 in or less of operation distance when mounted on optional mounting bracket (MS-SH6-2) and used as convergent reflective type. (with 25 mm 0.984 in setting distance and at the optimum sensitivity(Note))] Note : The optimum sensitivity stands for the sensitivity level when the operation indicator just lights up in the light received condition. |
Operation indicator | Orange LED [lights up when the sensing output of the amplifier is ON, incorporated on the emitter] |
Protection | IP67 (IEC) |
Ambient temperature | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ |
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
Ambient illuminance | Incandescent light: 2,000 lx or less at the light-receiving face |
Vibration resistance | 10 to 55 Hz frequency, 3 mm 0.118 in double amplitude in X, Y and Z directions for two hours each |
Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each |
Emitting element | Red LED (modulated) |
Emitting element:Peak emission wavelength | 644 nm 0.025 mil |
Material | Enclosure: Fluorine resin Cable sheath: Fluorine resin |
Cable | 0.089 mm2 single core shielded cables, 2 m 6.562 ft long |
Cable extension | Extension up to total 5 m 16.404 ft is possible with an equivalent cable (SH-61R: both emitter and receiver). |
Weight | Emitter: 15 g approx. Receiver: 15 g approx. |
Accessory | MS-SH6-1 (Sensor headmounting bracket): 2 pcs. |
Remark | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉. |