PM-L45-P|放大器內藏・U型微型光電感測器[小型・電線型] PM-45
※ 實際商品可能與照片不同。
適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質
品名 | PM-L45-P |
---|---|
型號 | PM-L45-P |
產品 | Amplifier Built-in / U-shaped Micro Photoelectric Sensor |
詳細 | Compact / Cable type [L type] |
商品名稱 | 放大器內藏・U型微型光電感測器[小型・電線型] PM-45 |
※為了商品改進,規格和外觀可能會在不事先通知的情況下變更,敬請諒解。
詳細規格
為了商品改進,規格和外觀可能會在不事先通知的情況下變更,敬請諒解。
項目 | 內容 |
---|---|
品名 | PM-L45-P |
型號 | PM-L45-P |
產品名 | Amplifier Built-in / U-shaped Micro Photoelectric Sensor |
Applicable regulations and certifications | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), ISO 13849-1 (Category 1, PLc) (Note), UL/c-UL Recognition certification (Note) : Conformed from December 2021 production. |
Sensing range | 6 mm 0.236 in (fixed) |
Minimum sensing object | 0.8 × 1.2 mm 0.031 × 0.047 in opaque object |
Hysteresis | 0.05 mm 0.002 in or less |
Repeatability | 0.01 mm 0.0004 in or less |
Supply voltage | 5 to 24 V DC ±10 % Ripple P-P 10 % or less |
Current consumption | 15 mA or less |
Output | PNP open-collector transistor ・Maximum source current: 50 mA ・Applied voltage: 30 V DC or less (between output and + V) ・Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current) |
Output:Output operation | Incorporated with 2 outputs: Light-ON / Dark-ON |
Output:Short-circuit protection | Incorporated |
Response time | Under light received condition: 20 μs or less Under light interrupted condition: 80 μs or less (Maximum response frequency: 3 kHz)(Note) (Note) : Refer to the note on the specification page for the response frequency. |
Operation indicator | Orange LED (lights up under light received condition) |
Pollution degree | 3 |
Protection | IP64 (IEC) |
Ambient temperature | -25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +80 ℃ -22 to +176 ℉ |
Ambient humidity | 5 to 85 % RH, Storage: 5 to 95 % RH |
Ambient illuminance | Fluorescent light: 1,000 ℓx at the light-receiving face |
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
Vibration resistance | 10 to 2,000 Hz frequency, 1.5 mm 0.059 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each |
Shock resistance | 15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions three times each |
Emitting element | Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, non-modulated) |
Material | Enclosure: PBT Display section: Polycarbonate |
Cable | 0.09-mm2 4-core cabtyre cable, PVC, 1 m 3.281 ft long |
Wiring length | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (Note 1) : If the cable is extended to 20 m 65.617 ft or longer, confirm that the supply voltage at the end of the cable attached to the sensor is 4.5 V or higher. (Note 2) : For safety applications, do not exceed 30 m 98.425 ft. |
Weight | Net weight: 10 g approx. Gross weight: 15 g approx. |
Remark | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉. |