Panasonic Industry ／ 制御機器
MENU
Panasonic Industry ／ 制御機器

FZ-11P｜顏色檢測光纖感測器 FZ-10

下載

※ 實際商品可能與照片不同。

適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質

品名

FZ-11P

型號

FZ-11P

產品

Color Detection Fiber Sensor

詳細

Amplifier [PNP output]

商品名稱

 顏色檢測光纖感測器 FZ-10

聯繫我們

※為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。

詳細規格

為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。
項目內容
品名FZ-11P
型號FZ-11P
產品名Color Detection Fiber Sensor
Applicable fibersFD-L51, FD-L52, FD-L53, FD-L54
Supply voltage12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption45 mA or less
Sensing objectOpaque or translucent object larger than the spot diameter of the applicable fiber
(Note) Make sure to confirm detection with an actual sensor before use.
OutputPNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
Output:Utilization categoryDC-12 or DC-13
Output:Output operationSwitchable either Coincident-ON or Incoincident-ON
Output:Short-circuit protectionIncorporated
Response time1 ms or less (3 ms or less when auto-teaching has been engaged)
IndicatorsPower indicator: Green LED (lights up when the power is ON, blinks during auto-teaching)
Operation indicator: Red LED (lights up when the output is ON)
* Both blink alternately when a manual teaching error occurs
Both blink simultaneously when the output is short-circuited
Timer functionApprox. 40 ms fixed OFF-delay timer (switchable either effective or ineffective)
TeachingButton operation, Switchable either manual-teaching or auto-teaching
ToleranceAdjustable in 16 grades with the tolerance adjuster
Ambient temperature-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed) (Note) , Storage: -20 to +70 ℃ -4 to +158 ℉
(Note) The amplifier should be used under the ambient temperature of +15 to +35 ℃ +59 to +95 ℉ when the tolerance adjuster is set from the 1st grade to the 4th grade, which provide fine color resolution.
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminanceIncandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
Insulation resistance20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
Vibration resistance10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock resistance100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each
Emitting elementRed LED / Green LED / Blue LED (Peak emission wavelength: 644 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil, modulated)
MaterialEnclosure: ABS
Case cover: Polycarbonate
Fiber lock lever: PPS
Cable0.2 mm2 3-core cabtyre cable, 2 m 328.084 ft long
Cable extensionExtension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
WeightNet weight: 85 g approx.
AccessoryMS-DIN-3 (Amplifier mounting bracket): 1 pc.
Adjusting screwdriver: 1 pc.

MENU

最近搜尋過的產品

最近搜尋過的產品型號