{lead}
{name}
  • {name}
  • 日本語
  • English (Global)
  • English (Asia Pacific)
  • 简体中文
  • 繁體中文
  • 한국어
▼
Panasonic Industry ／ 制御機器
MENU
Panasonic Industry ／ 制御機器

HL-G105-S-J｜小型雷射位移感測器 HL-G1

下載

※ 實際商品可能與照片不同。

適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質

品名

HL-G105-S-J

型號

HL-G105-S-J

產品

Compact Laser Displacement Sensor

詳細

Sensor head (High functionality type)

商品名稱

 小型雷射位移感測器 HL-G1

聯繫我們

※為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。

詳細規格

為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。
項目內容
品名HL-G105-S-J
型號HL-G105-S-J
產品名Compact Laser Displacement Sensor
顯示價格Please contact our office
Applicable regulationsCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
TypeHigh functionality type
測量中心距離50 mm 1.969 in
測量範圍± 10 mm ± 0.394 in
解析度1.5 μm 0.059 mil
Linearity± 0.1 % F.S.
溫度特性± 0.08 % F.S. / ℃
光源Red semiconductor laser, Class 2 (IEC / EN / JIS / GB / KS / FDA (Note：This product complies with the FDA regulations (FDA 21 CFR 1040.10 and 1040.11) in accordance with FDA Laser Notice No. 56, except for complying with IEC 60825-1 Ed. 3.
Max. output: 1 mW (Peak emission wavelength: 655 nm 0.026 mil)
光點直徑0.5 × 0.1 mm 0.020 x 0.039 in
(Note) This beam diameter is the size at the measurement center distance. These values were defined by using 1/e2 (13.5 %) of the center light intensity. If
there is a slight leakage of light outside the normal spot diameter and if the periphery surrounding the sensing point has a higher reflectivity than the
sensing point itself, then the results may be affected.
受光元件CMOS image sensor
電源電壓24 V DC ± 10 % including ripple 0.5 V (P-P)
消耗電流100 mA or less
取樣週期200 μs, 500 μs, 1 ms, 2 ms
Analog output : VoltageOutput range: 0 to +10.5 V (normal), 11 V (alarm)
Output impedance: 100 Ohm
Analog output : CurrentOutput range: 3.2 to 20.8 mA (normal), 21.6 mA (alarm)
Load impedance: 300 Ω or less
Outputs (OUT 1, OUT 2, OUT 3)Judgment output or alarm output (Setting can be selected.)
Selectable NPN transistor open-collector or PNP transistor open-collector

-Maximum sink current: 50 mA
-Applied voltage: 3 to 24 V DC (between output and 0 V)
-Residual voltage: 2 V or less (at 50 mA of sink current)

-Maximum source current: 50 mA
-Residual voltage: 2.8 V or less (at 50 mA of source current)
Output (OUT 1, OUT 2, OUT 3) : Output operationOpened when the amount of light is insufficient.
Output (OUT 1, OUT 2, OUT 3) : Short circuit protectionIncorporated (automatic restoration)
Output polarity setting inputNPN open collector output operates when 0 V is connected.
PNP open collector output operates when 24 V DC is connected.
Timing inputNPN output operates when 0V is connected and NPN is set. (It depends on the setting.)
PNP output operates when external power + is connected and PNP is set. (It depends on the setting.)
Multi inputZero set, zero set off, reset, memory switching, teaching, saving, and laser control according to the input time.
In case NPN output is selected, Function varies according to the time 0 V is connected NPN.
In case PNP output is selected, Function varies according to the time external power + is connected.
Communications interfaceRS-422 or RS-485 (selectable)
Baud rate: 9,600/19,200/38,400/115,200/230,400/460,800/921,600 bps
Data length 8 bit, Stop bit length 1 bit, Without parity check, BCC check, Termination code: CR
Indicator : Laser emissionGreen LED (lights up during laser emission)
Indicator : AlarmOrange LED lights up when this product cannot measure because of insuffienct or excessive light intensity.
Indicator : Measurement rangeThree yellow LED
Digital displayRed LED 5 digit display
Degree of pollution2
使用標高2,000 m 6561 ft or less
Environmental resistance : ProtectionIP67
Environmental resistance : Ambient temperature-10 to +45 ℃ +14 to +113 ℉ (No dew condensation allowed), Storage: -20 to +60 ℃ -4 to +140 ℉
Environmental resistance : Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Environmental resistance : Ambient illuminanceIncandescent light: 3,000 liter x or less at the light-receiving face
(Note) The fluctuation by ambient illuminance is ± 0.1 % F.S. or less.
Insulation resistance20 MOhm , or more, with 250 V DC between all supply teminals connected together and enclosure
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Environmental resistance : Vibration resistance10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X,Y and Z directions for two hours each
Environmental resistance : Shock resistance500 m/s2 acceleration (50 G approx.) in X,Y and Z directions three times each
材質Enclosure: PBT
Front cover: Acrylic
Cable: PVC
Cable14-core cabtyre cable with connector, 0.5 m 1.640 ft long
Cable extensionExtension up to total 20 m 65.617 ft is possible with optional cable.
重量Net weight: 70 g approx. (not including cable), 110 g approx. (including cable)
Gross weight: 160 g approx.
AccessoryWarning label: 1 set
備註Where measurement conditions have not been specified precisely, the conditions used were as follows: supply voltage 24 V DC, ambient temperature +20 ℃ +68 ℉, sampling rate 500 μs, average number of samples: 1024, measurement center distance, object measured is made of white ceramic and analog measurement values.

MENU

最近搜尋過的產品

最近搜尋過的產品型號