Panasonic Industry ／ 制御機器
MENU
Panasonic Industry ／ 制御機器

ER-VW｜薄型靜電消除器[高周波AC方式] ER-VW

下載

※ 實際商品可能與照片不同。

適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質

品名

ER-VW

型號

ER-VW

產品

Thin-type Ionizer

詳細

Spot type

商品名稱

 薄型靜電消除器[高周波AC方式] ER-VW

聯繫我們

※為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。

詳細規格

為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。
項目內容
品名ER-VW
型號ER-VW
產品名Thin-type Ionizer
顯示價格Please contact our office
CE marking compliant directivesEMC Directive, RoHS Directive
Charge removal time1 sec. or less (plus or minus1,000 V to plus or minus100 V)
(Note) A typical sample applied with a supply voltage of 24 V, a distance of 100 mm 3.937 in from the front surface of the air flow outlet and a pressure of 0.25 MPa. (Measured on a sample left in the atmosphere at a relative humidity of 65 % RH or less for 24 hours or more.)
Ion balanceplus or minus10 V or less
(Note) A typical sample applied with a supply voltage of 24 V, a distance of 100 mm 3.937 in from the front surface of the air flow outlet and a pressure of 0.25 MPa. (Measured on a sample left in the atmosphere at a relative humidity of 65 % RH or less for 24 hours or more.)
Ozone generation0.05 ppm or less
(Note) A typical sample applied with a supply voltage of 24 V, a distance of 300 mm 11.811 in from the front surface of the air flow outlet and a pressure of 0.25 MPa.
Applicable fluidAir (dried clean air)
(Note) Dry clean air is air that has been processed through an air dryer (freezing point around –20 ℃ –4 ℉) and an air filter (mesh size around 0.01 microm 0.0004 mil).
Supplied air flow60 liter/min. (ANR) or less
Air pressure range0.05 to 0.5 MPa
Supply voltage24 V DC plus or minus 10 %
Current consumption120 mA or less
Discharge methodHigh frequency AC method
Discharge output voltage2,000 V approx.
Output [Check (CHECK) Error (ERROR) Discharge (DSC)]NPN open-collector transistor
• Maximum sink current: 50 mA
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 1 V or less (at 50 mA sink current)
(Note："DSC" is an abbreviated name of "DISCHARGE".)
Output:Output operationCheck output (CHECK): ON when the discharge needle is dirty or worn, OFF when operation is normal
Error output (ERROR): OFF when abnormal discharge is detected, ON when operation is normal
Discharge output (DSC) (Note): ON when discharging, OFF when discharge halts
(Note) ‘‘DSC’’ is an abbreviated name of ‘‘DISCHARGE’’.
Output:Short-circuit protectionIncorporated
Discharge halt input (DSC OFF)Short-circuit to 0 V: Discharge halt, Open: Discharge allowed (operation start)
(Note："DSC" is an abbreviated name of "DISCHARGE".)
Reset input (RESET)In the state that operation is stopped due to an error detection, open 0 V of the power supply from short-circuit state to cancel ERROR
Indicators:Power (POWER)Green LED (lights up when the power is ON)
Indicators:Discharge (DSC)Green LED (lights up when discharging)
(Note) ‘‘DSC’’ is an abbreviated name of ‘‘DISCHARGE’’.
Indicators:Air monitoring (AIR)Orange LED (lights up when no air is being supplied)
(Note) Discharge halts when lights up.
Indicators:Check (CHECK)Orange LED (lights up when the discharge needle is dirty or worn, etc.)
Indicators:Error (ERROR)Red LED (lights up when abnormal discharge is detected)
Ambient temperature0 to +55 ℃ +32 to +131 ℉ (No dew condensation allowed), Storage: –10 to +65 ℃ +14 to +149 ℉
Ambient humidity35 to 65 % RH (No dew condensation allowed), Storage: 35 to 65 % RH
I/O connectorFor power & input / output: 8-pin connector, For connection: 9-pin connector
Connectable unitsMaximum number of connectable units: 5 (Including this unit)
Enclosure earthingCapacitor earth
MaterialEnclosure: ABS (Nickel plated), Nozzle mount, Screw mount, Nozzle: Stainless steel. Discharge needle: Tungsten
WeightNet weight: 110 g approx., Gross weight: 180 g approx.
AccessoriesConnector attached cable: 1 pc. (length 0.5 m 1.640 ft), End connector (9-pin): 1 pc., Lead wire for connecting F.G.: 1 pc.

MENU

最近搜尋過的產品

最近搜尋過的產品型號