Panasonic Industry ／ 制御機器
MENU
Panasonic Industry ／ 制御機器

SC-LG2-CEF-P｜IO-Link主站模組

下載

※ 實際商品可能與照片不同。

適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質

品名

SC-LG2-CEF-P

型號

SC-LG2-CEF-P

詳細

For CC-Link IE Field

商品名稱

 IO-Link主站模組

聯繫我們

※為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。

詳細規格

為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。
項目內容
品名SC-LG2-CEF-P
型號SC-LG2-CEF-P
Regulatory complianceEMC Directive, RoHS Directive
Supply voltage24 V DC+10-15%, Ripple P-P 10 % or less
Environmental resistance : Ambient temperature-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉
Environmental resistance : Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Environmental resistance : Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Environmental resistance : Insulation resistance20 MΩ or more with 250 V DC megger between all supply terminals connected together and enclosure
Environmental resistance : Vibration resistance10 to 150 Hz frequency, 0.75 mm 0.03 in double amplitude (10 to 58 Hz), maximum acceleration 49 m/s2, (58 to 150 Hz) in X, Y, and Z directions for two hours each
Environmental resistance : Shock resistance98 m/s2 (10 G approx.) in X, Y, and Z directions three times each
Grounding methodPower supply connector is equipped with a frame ground (F.G.)
RJ45 connector shield: Directly connected to ground terminal
Internal circuit: C coupling, Casing: Floating type
Limit to the number of flash memory save operations100,000
(Note) : This product saves settings in internal flash memory.
MaterialCase: Polycarbonate
Net weightNet weight: 210 g approx., Gross weight: 270 g approx.
AccessoriesPower supply connector: 1 pc.

CC-Link IE Field specifications

項目內容
Current consumption200 mA or less
Communication methodCC-Link IE Field
Remote station typeIntelligent device station
Network number setting1 to 239 (decimal) [1 to EF (hex)] (0 and 240 or more: Error)
Cyclic transmission
[Maximum number of link points per station]		RX/RY: Maximum 112 points (112 bits) / Maximum 112 points (112 bits)
RWr/RWw: Maximum 132 points (132 words) / Maximum 132 points (132 words)
Transient transmissionFor server function only, message size: 2 kbytes (maximum)
Number of ports1000BASE-T Ethernet port (RJ45)x 2
Station number setting1 to 120 (decimal)(0 and 121 or more: Error)
Communication speed1 Gbps
Communication cableCategory 5e or higher Ethernet cables that satisfy the 1000BASE-T standard
(Double shielded twisted pair cable or straight cable)
(Note) : Use a cable recommended by CC-Link Partner Association.
Transmission line typeLine type, star type (line/star mixed type also possible), ring type
Maximum distance between stations100 m 328.084 ft
Maximum number of stations that can be connected121 (1 master station, 120 slave stations)
Maximum number of stages of cascade connection20

IO-Link specifications

項目內容
Current consumption150 mA or less (excluding the current consumption of connected IO-Link devices)
Allowable passing current3 A or less
(Note) : Take care that the total consumption current of connected devices and the unit on the IO-Link side does not exceed the allowable passing current.
Power to devices (L+, L-), digital I/O (C/Q), and digital input (DI) are supplied from IO-Link (+V, -V) on the power supply connector.
Communication methodIO-Link V1.0 / V1.1
Number of portse-CON compliant connector port for IO-Link x 8
Communication speedCOM1 (4.8 kbps), COM2 (38.4 kbps), COM3 (230.4 kbps)
Automatically set by IO-Link device
Current supplied to device (L+, L-)Maximum 200 mA per port
(Note) : Take care that the total consumption current of connected devices and the unit on the IO-Link side does not exceed the allowable passing current.
Power to devices (L+, L-), digital I/O (C/Q), and digital input (DI) are supplied from IO-Link (+V, -V) on the power supply connector.
Digital I/O (C/Q)IO-Link mode : Compliance with the IO-Link standard
SIO mode [During input setting] : PNP input (Sink current: Max. 15 mA)
SIO mode [During output setting] : Push-pull output (Drive capacity: Max.100 mA)
(Note 1) : Take care that the total consumption current of connected devices and the unit on the IO-Link side does not exceed the allowable passing current.
Power to devices (L+, L-), digital I/O (C/Q), and digital input (DI) are supplied from IO-Link (+V, -V) on the power supply connector.
(Note 2) : Operation settings for digital I/O (C/Q) and digital input (DI) must be configured with CC-Link IE Field.
If operation settings are not configured, they will not operate.
Digital input (DI)PNP input (Sink current: Max. 15 mA)
(Note 1) : Take care that the total consumption current of connected devices and the unit on the IO-Link side does not exceed the allowable passing current.
Power to devices (L+, L-), digital I/O (C/Q), and digital input (DI) are supplied from IO-Link (+V, -V) on the power supply connector.
(Note 2) : Operation settings for digital I/O (C/Q) and digital input (DI) must be configured with CC-Link IE Field.
If operation settings are not configured, they will not operate.
Communication cableUnshielded
Maximum cable length20 m 65.617 ft
IO-Link connectore-CON compliant connector (4-pin type)
(Note) : For the connectors for connecting devices to this product, purchase simple wire-press connector (e-CON) CN-EP2 (5 pcs. set) or CN-EP3 (5 pcs. set) or the recommended product.

MENU

最近搜尋過的產品

最近搜尋過的產品型號