GX-H8B-R|方形近接感測器[放大器內藏] GX-F/H
※ 實際商品可能與照片不同。
適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質
| 品名 | GX-H8B-R |
|---|---|
| 型號 | GX-H8B-R |
| 產品 | Rectangular-shaped Inductive Proximity Sensor |
| 詳細 | NPN output |
| 商品名稱 | 方形近接感測器[放大器內藏] GX-F/H |
※為了商品改進,規格和外觀可能會在不事先通知的情況下變更,敬請諒解。
詳細規格
為了商品改進,規格和外觀可能會在不事先通知的情況下變更,敬請諒解。
| 項目 | 內容 |
|---|---|
| 品名 | GX-H8B-R |
| 型號 | GX-H8B-R |
| 產品名 | Rectangular-shaped Inductive Proximity Sensor |
| 顯示價格 | Please contact our office |
| CE marking directive compliance | EMC Directive, RoHS Directive |
| 最大工作距離 | 2.5 mm 0.098 in plus or minus 8 % (Note) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. |
| 穩定檢測範圍 | 0 to 2.1 mm 0 to 0.083 in (Note) The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation. |
| 標準檢測物體 | Iron sheet 15 × 15 × t 1 mm 0.591 × 0.591 × t 0.039 in |
| 應差(遲滯) | 20 % or less of operation distance(with standard sensing object) |
| Repeatability | Along sensing axis, perpendicular to sensing axis: 0.04 mm 0.002 in or less |
| 電源電壓 | 12 to 24 V DC +10/-15 % Ripple P-P 10 % or less |
| 消耗電流 | 15 mA or less |
| 輸出 | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 100 mA sink current) |
| Output:Output operation | Normally closed |
| Output:Utilization category | DC-12 or DC-13 |
| Max. response frequency | 500 Hz |
| 動作指示燈 | Orange LED(lights up when the output is ON) |
| 環境性能: 保護構造 | IP68 (IEC), IP68g (JEM) (Note) Panasonic Electric Works SUNX's IP68 test method 1. Immerse at 0 m below 0 ℃ +32 ℉ water surface and leave for 30 min. Then, immerse at 0 m below +70 ℃ +158 ℉ water surface and leave for 30 min. 2. Regard the heat shock test in 1 as one cycle and perform 20 cycles. 3. Leave in water at a depth of 1 m 3.281 ft in water for 500 hours. 4. After tests 1 to 3, insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values. (Note) If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. |
| 環境性能: 使用環境溫度 | -25 to +70 ℃ -13 to +158 ℉ , Storage: - 40 to +85 ℃ - 40 to +185 ※ |
| 環境性能: 使用環境濕度 | 45 to 85 % RH, Storage: 35 to 95 % RH |
| 環境性能: 耐電壓 | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| 環境性能: 絕緣電阻 | 50 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| 環境性能: 耐振動 | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (Max. 20 G) in X, Y and Z directions for two hours each |
| 環境性能: 耐衝撃 | 10,000 m/s2 acceleration (1,000 G approx.) in X, Y and Z directions three times each |
| 檢測距離的變動: 溫度特性 | Over ambient temperature range -25 to +70 ℃ -13 to +158 ℉: Within plus or minus 8 % of sensing range at +23 ℃ +73 ℉ |
| 檢測距離的變動: 電壓特性 | Within plus or minus 2 % for +10/-15 % fluctuation of the supply voltage |
| 材質 | Enclosure: PBT Indicator part: Polycarbonate / Polyester |
| Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
| 重量 | 20 g approx. |
