Panasonic Industry ／ 制御機器
MENU
Panasonic Industry ／ 制御機器

PX-24｜障礙物檢測感測器 PX-2

下載

※ 實際商品可能與照片不同。

適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質

品名

PX-24

型號

PX-24

產品

Long Range & Wide Area Photoelectric Sensor

詳細

Main sensors(Auxiliary sensor connectable model)

商品名稱

 障礙物檢測感測器 PX-2

聯繫我們

※為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。

詳細規格

為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。
項目內容
品名PX-24
型號PX-24
產品名Long Range & Wide Area Photoelectric Sensor
Regulatory complianceEMC Directive, RoHS Directive
Sensing range (OUT 1 and OUT 2 areas) 3 m 9.843 ft
(Note：The sensing range is specified for white non-glossy paper (300 x 300 mm 11.811 × 11.811 in) as the object.)
Hysteresis15 % or less of operation distance
(Note：The sensing range is specified for white non-glossy paper (300 x 300 mm 11.811 × 11.811 in) as the object.)
Supply voltage10 to 31 V DC including ripple
Power consumptionUnder operation: 1.5 W or less, Under sleep condition: 0.3 W or less (without auxiliary sensor)
(Note：Obtain the current consumption by the following calculation.
Current consumption = Power consumption ÷ Supply voltage
(e.g.) When the supply voltage is 12 V, the current consumption (operating condition) is: 1.5 W ÷ 12 V = 0.125 A = 125 mA)
OUT1, OUT2NPN open-collector transistor
・Maximum sink current: 100 mA
・Applied voltage: 40 V DC or less between OUT 1 / OUT 2 and 0 V)
・Residual voltage: 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
* OUT1(OR circuit among the effective center, left, right, adjacent left / right OUT 1 areas and the effective auxiliary left / right areas)
OUT2(OR circuit among the effective center, left and right OUT 2 areas)
OUT1, OUT2:Output operationSelectable either Light-ON or Dark-ON with a switch (Output operation of OUT 1 and OUT 2 is the same.)
OUT1, OUT2:Short-circuit protectionIncorporated
Extraneous light monitor outputNPN open-collector transistor
・Maximum sink current: 100 mA
・Applied voltage: 40 V DC or less (between extraneous light monitor output and 0 V)
・Residual voltage: 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Extraneous light monitor output:Output operationON when modulated beam other than its own (including auxiliary sensor's) light is received
Response time80 ms or less
Operation indicators:OUT 1 areaRed LED (lights up when the beam is received in the effective OUT 1 areas)
Operation indicators:OUT 2 areaYellow LED (lights up when the beam is received in the effective OUT 2 areas)
Sensitivity adjusterContinuously variable adjusters (OUT 1, adjacent right OUT 1, adjacent left OUT 1 and OUT 2 areas are adjusted independently.)
External sensitivity adjustment functionSensitivity adjustment is possible with an analog input.
Sensing areaFour sensing areas are selectable with dip switches.
Sleep functionOperating / sleep selectable with external input
Automatic Interference prevention functionOptical interference from up to 25 units is prevented.
ProtectionIP65 (IEC)
Ambient temperature-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminanceIncandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
Shock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting elementInfrared LED (Peak emission wavelength: 950 nm 0.037 mil, modulated)
MaterialEnclosure: ABS, Lens: Acrylic, Cover: Polycarbonate
CableFor input and output: 0.18 mm2 9-core (PX-24ES and PX-23ES: 12-core) cabtyre cable, 0.5 m 1.640 ft long
For auxiliary sensor connection: 0.18 mm2 10-core connector attached cabtyre cable, 0.5 m 1.640 ft long10-core connector attached cabtyre cable, 0.5 m 1.640 ft long
Cable extensionExtension up to total 100 m 328.084 ft (10 m 32.808 ft for auxiliary sensor connection) is possible with 0.3 mm2, or more, cable.
WeightNet weight: 210 g approx.
Gross weight: 390 g approx.
AccessoryMS-PX-2 (Main sensor mounting bracket): 1 set, Adjusting screwdriver: 1 pc.

MENU

最近搜尋過的產品

最近搜尋過的產品型號