LX-101-P|數位式色標感測器[放大器內藏] LX-100
※ 實際商品可能與照片不同。
適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質
品名 | LX-101-P |
---|---|
型號 | LX-101-P |
產品 | Digital Mark Sensor |
詳細 | Cable type |
商品名稱 | 數位式色標感測器[放大器內藏] LX-100 |
※為了商品改進,規格和外觀可能會在不事先通知的情況下變更,敬請諒解。
詳細規格
為了商品改進,規格和外觀可能會在不事先通知的情況下變更,敬請諒解。
項目 | 內容 |
---|---|
品名 | LX-101-P |
型號 | LX-101-P |
產品名 | Digital Mark Sensor |
顯示價格 | Please contact our office |
Regulatory compliance | EMC Directive, RoHS Directive |
Sensing range | 10 ± 3 mm 0.394 ± 0.118 in |
Spot size | 1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance) |
Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
Current consumption | Normal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage) |
Output 1(OUT) | PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1.5 V or less (at 50 mA source current) |
Output 1:Short-circuit protection | Incorporated |
Output 1:Output operation | Mark mode: Light-ON / Dark-ON (Auto-setting on teaching) Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching) |
Output 2(OUT) | PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1.5 V or less (at 50 mA source current) |
Output 2:Short-circuit protection | Incorporated |
Output 2:Output operation | Inverted operation of the output 1 |
Response time | Mark mode: 45 micro s or less Color mode: 150 micro s or less |
Teaching input | PNP non-contact input - Signal condition: High... +4 V to +V (sink current: 3 mA or less), Low... 0 to +0.6 V, or open - Input impedance: 10 kOhm approx. |
Digital display | 4-digit red LED display |
Sensitivity setting | Mark mode: 2-level teaching / Full-auto teaching Color mode: 1-level teaching |
Fine sensitivity adjustment function | Incorporated |
Timer function | Incorporated with variable ON-delay / OFF-delay timer, switchable either effective or ineffective (Timer period: 1 to 500 ms, 9 levels variable) |
Protection | IP67 (IEC) |
Ambient temperature | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ |
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
Ambient illuminance | Incandescent light: 3,000 lx or less at the light-receiving face |
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Vibration resistance | 10 to 500 Hz frequency, 3.0 mm 0.118 in double amplitude (max. 20 G) in X, Y and Z directions for two hours each |
Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directionsthree times each |
Emitting element | Combined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil) |
Material | Enclosure: PBT Display cover: Polycarbonate Operation buttons: Silicone rubber Lens: Glass Lens holder: Aluminum |
Cable | 0.34 mm2 5-core cabtyre cable, 2 m 6.562 ft long |
Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
Weight | Net weight: 120 g approx Gross weight: 180 g approx |
Accessory | M4 (length 30 mm 1.181 in) screw with washers: 2 pcs. |