Panasonic Industry ／ 制御機器
MENU
Panasonic Industry ／ 制御機器

LS-501P-C2｜放大器分離型 數位雷射感測器 LS-500

下載

※ 實際商品可能與照片不同。

適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質

品名

LS-501P-C2

型號

LS-501P-C2

產品

Amplifier-separated Type Digital Laser Sensor

詳細

Amplifiers(Cable type)

商品名稱

 放大器分離型 數位雷射感測器 LS-500

聯繫我們

※為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。

詳細規格

為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。
項目內容
品名LS-501P-C2
型號LS-501P-C2
產品名Amplifier-separated Type Digital Laser Sensor
顯示價格Please contact our office
Regulatory complianceEMC Directive, RoHS Directive
Operation indicatorOrange LED (lights up when sensing output 1 or sensing output 2 is ON)
ProtectionIP40(IEC)
Ambient temperature-10 to +55degrees + 14 to 131 degrees Fahrenheit (If 4 to 7 units are mounted close together, -10 to +50 degrees +14 to +122 degrees Fahrenheit ; if 8 to 12 units are mounted close together, -10 to +45 degrees +14 to +113 degrees Fahrenheit )(No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 150 Hz frequency, 1.5 mm 0.059 in double amplitude or maximum acceleration 98 m/s2 in X, Y and Z directions for two hours each
Shock resistance98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each
MaterialEnclosure: Polycarbonate
Cover: Polycarbonate
Switch: Polyacetal
Cable0.2mm2 6-core cabtyre cable, 2 m 6.562 ft long
(Note：Cable cannot be extended.)
WeightNet weight: 75 g approx.
Gross weight: 110 g approx.
AccessoryFX-MB1 (Amplifier protective seal): 1 set
Supply voltage12 to 24 V DC +10-15% Ripple P-P 10 % or less
Power consumptionNormal operation: 1,200 mW or less (Current consumption 50 mA or less at 24 V supply voltage,excluding monitor current output)
ECO mode: 980 mW or less (Current consumption 40 mA or less at 24 V supply voltage,excluding monitor current output)
Sensing outputs (Sensing output 1, 2)PNP open-collector transistor
・Maximum source current: 50 mA (Note：25 mA if 5 or more amplifier are connected in cascade (excluding cable extension).)
・Applied voltage: 30 V DC or less (between output and +V)
・Residual voltage: 2 V or less (at max. source current)
(Note：Select either sensing output 2 or external input as the connector type.)
Sensing outputs (Sensing output 1, 2):Output operationSelectable either Light-ON or Dark-ON
Sensing outputs (Sensing output 1, 2):Short-circuit protectionIncorporated
Sensing output setting:Sensing output 1Normal mode, differential mode, hysteresis mode, window comparator mode, selectable
Sensing output setting:Sensing output 2Normal mode, differential mode, hysteresis mode, self-diagnostic output mode, answer-back output mode, selectable
(Note：Select either sensing output 2 or external input.)
Response timeH-SP: 60 micro s or less, FAST: 150 micro s or less, STD: 250 micro s or less, LONG: 500 micro s or less, U-LG: 5 ms or less, HYPR: 24 ms or less selectable
Monitor current outputOutput current: Approx. 4 to 20 mA (H-SP, FAST, STD: at 0 to 4,000 indication)
Response time: 2 ms or less
Zero point: 4 mA plus or minus 1 % F.S.
Span: 16 mA plus or minus 5 % F.S.
Linearity: plus or minus 3 % F.S.
Load resistance: 0 to 250 Ohm
External inputPNP non-contact input
- Signal condition High: +4 Vto+V DC(sink current 3.0 mA or less), Low: 0 to +0.6 V DC or open
- Input impedance: 10 kOhm approx.(Note：Select either sensing output 2 or external input.)
External input functionLaser emission halt / teaching (full-auto teaching, limit teaching, 2 point teaching) / logic operation setting / copy lock /display adjustment / data bank load / data bank save, selectable
Laser emission indicatorGreen LED (lights up during laser emission)
Output select indicatorYellow LED (lights up when output is selected)
Digital display8-digit 7-segment digital display (4-digit green LED + 4-digit red LED), MODE indicator (Yellow LED): L/D, CUST, PRO
Incident light indication rangeH-SP/FAST/STD: 0 to 4,000
LONG/U-LG/HYPR: 0 to 9,999
Sensitivity setting2-level teaching / limit teaching / full auto teaching / manual adjustment
Logical operationBetween sensing output 1 and calculation target: Disabled / and / or / xor, selectable
Calculation target: Sensing output 2 / adjacent upstream amplifier (sensing output 1) / external input, selectable
Timer function
OFF-delay timer, ON-delay timer, ONE-SHOT timer, ON / OFF-delay timer, ON-delay / ONE-SHOT timer,
switchable either effective of ineffective, with variable timer period

OFF-delay timer, ON-delay timer, ONE-SHOT timer,
switchable either effective of ineffective, with variable timer period
Timer function:TimeTimer range '' ms'': 0.5 ms approx., 1 to 9,999 ms approx., in approx. 1 ms intervals
Timer range '' sec'': 0.5 sec. approx., 1 to 32 sec. approx., in approx. 1 sec. intervals
Timer range '' 1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., in approx. 0.1 ms intervals, Set separately for each output.
Automatic interference prevention functionIncorporated
(Note：Number of units that can be mounted close together: 0 for H-SP; 2 for FAST; 4 for STD, LONG, U-LG, or HYPR)
Cable extensionExtension up to total 100 m 328.084 ft is possible with 0.3mm2, or more, cable.

MENU

最近搜尋過的產品

最近搜尋過的產品型號