Panasonic Industry ／ 制御機器
MENU
Panasonic Industry ／ 制御機器

LS-401｜數位雷射感測器 LS-400

下載

※ 實際商品可能與照片不同。

適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質

品名

LS-401

型號

LS-401

產品

Digital Laser Sensor

詳細

Amplifier (Connector type)

商品名稱

 數位雷射感測器 LS-400

聯繫我們

※為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。

詳細規格

為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。
項目內容
品名LS-401
型號LS-401
產品名Digital Laser Sensor
顯示價格Please contact our office
Operation indicatorOrange LED (lights up when output 1 and output 2 are ON)
Laser emission indicatorGreen LED (lights up during laser emission)
Ambient temperature-10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are mounted close together: -10 to +50 ℃ +14 to +122 ℉ , if 8 to 16 units are mounted close together: -10 to +45 ℃ +14 to +113 ℉ )
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Voltage withstandability1,000 V AC for one min.
between all supply terminals connected together and enclosure
Insulation resistance20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock resistance98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each
MaterialEnclosure: Heat-resistant ABS
Transparent cover: Polycarbonate
Push button switch: Acrylic
Jog switch: ABS
Cable-
(Note) The cable is not supplied as an accessory. Be sure to use the optional quick-connection cables given below.
Main cable (4-core): CN-74-C1 (cable length 1 m 3.281 ft), CN-74-C2 (cable length 2 m 6.562 ft), CN-74-C5 (cable length 5 m 16.404 ft)
Sub cable (2-core): CN-72-C1 (cable length 1 m 3.281 ft), CN-72-C2 (cable length 2 m 6.562 ft), CN-72-C5 (cable length 5 m 16.404 ft)
WeightNet weight: 15 g approx
Gross weight: 20 g approx
Supply voltage12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumptionNormal operation: 950 mW or less (Current consumption 40 mA or less at 24 V supply voltage)
ECO mode: 780 mW or less (Current consumption 33 mA or less at 24 V supply voltage)
Outputs(Output 1, Output 2)NPN open-collector transistor
- Maximum sink current: 100 mA (Note)
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.5 V or less [at 100 mA (Note) sink current]
(Note) 50 mA if 5 to 8 connector type amplifiers are connected in cascade , and 25 mA if 9 to 16 connector type amplifiers are connected in cascade.
Outputs(Output 1, Output 2):Output operationSelectable either Light-ON or Dark-ON, with jog switch
Outputs(Output 1, Output 2):Short-circuit protectionIncorporated
Response time80 micro s or less (H-SP), 150 micro s or less (FAST), 500 micro s or less (STD), 4 ms or less (U-LG) selectable with jog switch
External input(Laser emission halt Full-auto teaching / Limit teaching)-
Select indicatorYellow LED
(lights up when either output 1 or output 2 is selected)
MODE indicatorRUN: Green LED
TEACH, L/D, TIMER, CUST, PRO: Yellow LED
Digital display4 digit (green) + 4 digit (red) LED display
Sensitivity settingNormal mode: 2-level teaching / Limit teaching / Full-auto teaching / Manual adjustment
Window comparator mode: Teaching (1-level, 2-level, 3-level) / Manual adjustment
Hysteresis mode: Teaching (1-level, 2-level, 3-level) / Manual adjustment
Differential mode: 5-level settings
Fine sensitivity adjustment functionIncorporated
Timer functionIncorporated with variable ON-delay / OFF-delay / ONE SHOT timer, switchable either effective or ineffective.
Timer function:Time1 to 9,999 ms
Automatic Interference prevention functionIncorporated
[Up to four sets of sensor heads can be mounted close together. (However, disabled when in H-SP mode)]
Cable extensionExtension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.

MENU

最近搜尋過的產品

最近搜尋過的產品型號