EX-Z13FB-R|放大器內藏 超小型光電感測器 EX-Z
※ 實際商品可能與照片不同。
適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質
| 品名 | EX-Z13FB-R |
|---|---|
| 型號 | EX-Z13FB-R |
| 產品 | Ultra-minute Photoelectric Sensor |
| 詳細 | Thru-beam [Front sensing] |
| 商品名稱 | 放大器內藏 超小型光電感測器 EX-Z |
※為了商品改進,規格和外觀可能會在不事先通知的情況下變更,敬請諒解。
詳細規格
為了商品改進,規格和外觀可能會在不事先通知的情況下變更,敬請諒解。
| 項目 | 內容 |
|---|---|
| 品名 | EX-Z13FB-R |
| 型號 | EX-Z13FB-R |
| 產品名 | Ultra-minute Photoelectric Sensor |
| 符合規範及認證 | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL/c-UL Recognition |
| Output operation | Dark-ON |
| 檢測距離 | 500 mm 19.685 in |
| Min. sensing object | ø1.0 mm ø0.039 in opaque object (Completely beam interrupted object)(Setting distance between emitter and receiver: 500 mm 19.685 in) |
| Repeatability(perpendicular to sensing axis) | 0.05 mm 0.002 in or less |
| 電源電壓 | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
| 消耗電流 | Emitter: 10 mA or less Receiver: 10 mA or less |
| 輸出 | NPN open-collector transistor - Maximum sink current: 20 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1.5 V or less (at 20 mA sink current) |
| 輸出:短路保護 | Incorporated |
| 反應時間 | 0.5 ms or less |
| 動作指示燈 | Orange LED (Lights up when the sensing output is ON) |
| Stability indicator | Green LED (Lights up under the stable light received condition or the stable dark condition) |
| 耐環境性:保護結構 | IP67 (IEC) |
| 耐環境性:使用環境溫度 | -10 to +55 ℃ 14 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉ |
| 耐環境性:使用環境濕度 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 耐環境性:使用環境照度 | Incandescent light: 5,000 ℓx at the light-receiving face |
| 耐環境性:耐電壓 | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| 耐環境性:絕緣電阻 | 20 MΩ or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| 耐環境性:耐振動 | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (10 to 58 Hz), acceleration 196 m/s² (58 to 500 Hz)in X, Y and Z directions for two hours each |
| 耐環境性:耐衝撃 | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each |
| 投光元件 | Red LED (Peak emission wavelength: 650 nm 0.026 mil, modulated) |
| Grounding | Floating |
| 材質 | Enclosure: PBT Lens: Polycarbonate Metallic part: Stainless steel (SUS304)(SUS301 for rear side of front sensing type) |
| 電線 | 0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long Note:The bending-resistant cable type has a 0.1 mm2 3-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m 6.562 ft long. |
| 延長電線 | Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver) . |
| 重量 | Net weight (each emitter and receiver) : 15 g approx. Gross weight: 35 g approx. |
| Accessory | M2 mounting screws: 1 set (front sensing type: 6 mm 0.236 in in length; side sensing type: 10 mm 0.394 in in length) |
| Remark | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ 73 ℉. |
