Panasonic Industry ／ 制御機器
MENU
Panasonic Industry ／ 制御機器

EX-Z11A-P｜放大器內藏 超小型光電感測器 EX-Z

下載

※ 實際商品可能與照片不同。

適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質

品名

EX-Z11A-P

型號

EX-Z11A-P

產品

Ultra-minute Photoelectric Sensor

詳細

Thru-beam [Side sensing]

商品名稱

 放大器內藏 超小型光電感測器 EX-Z

聯繫我們

※為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。

詳細規格

為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。
項目內容
品名EX-Z11A-P
型號EX-Z11A-P
產品名Ultra-minute Photoelectric Sensor
Applicable regulations and certificationsCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL/c-UL Certification
Output operationLight-ON
Sensing range50 mm 1.969 in
Min. sensing objectø0.3 mm ø0.012 in opaque object (Completely beam interrupted object)(Setting distance between emitter and receiver: 50 mm 1.969 in)
Repeatability(perpendicular to sensing axis)0.02 mm 0.001 in or less
Supply voltage12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumptionEmitter: 10 mA or less
Receiver: 10 mA or less
OutputPNP open-collector transistor
- Maximum source current: 20 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1.5 V or less (at 20 mA source current)
Output:Short-circuit protectionIncorporated
Response time0.5 ms or less
Operation indicatorOrange LED (Lights up when the sensing output is ON)
Stability indicatorGreen LED (Lights up under the stable light received condition or the stable dark condition)
ProtectionIP67 (IEC)
Ambient temperature-10 to +55 ℃ 14 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminanceIncandescent light: 5,000 ℓx at the light-receiving face
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MΩ or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each
Shock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each
Emitting elementRed LED (Peak emission wavelength: 650 nm 0.026 mil, modulated)
GroundingFloating
MaterialEnclosure: PBT
Lens: Polycarbonate
Metallic part: Stainless steel (SUS304)(SUS301 for rear side of front sensing type)
Cable0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Note:The bending-resistant cable type has a 0.1 mm2 3-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m 6.562 ft long.
Cable extensionExtension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver) .
WeightNet weight (each emitter and receiver) : 15 g approx.
Gross weight: 35 g approx.
AccessoryM2 mounting screws: 1 set (front sensing type: 6 mm 0.236 in in length; side sensing type: 10 mm 0.394 in in length)
RemarkWhere measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ 73 ℉.

MENU

最近搜尋過的產品

最近搜尋過的產品型號