EX-FC1|滲漏檢測感測器[放大器內藏] EX-F70/EX-F60
※ 實際商品可能與照片不同。
適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質
| 品名 | EX-FC1 |
|---|---|
| 型號 | EX-FC1 |
| 產品 | Simple wire-saving unit |
| 商品名稱 | 滲漏檢測感測器[放大器內藏] EX-F70/EX-F60 |
※為了商品改進,規格和外觀可能會在不事先通知的情況下變更,敬請諒解。
詳細規格
為了商品改進,規格和外觀可能會在不事先通知的情況下變更,敬請諒解。
| 項目 | 內容 |
|---|---|
| 品名 | EX-FC1 |
| 型號 | EX-FC1 |
| 產品名 | Simple wire-saving unit |
| 符合規範及認證 | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL Recognition |
| Applicable connector | SL-CP1 |
| 電源電壓 | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
| 消耗電流 | 50 mA or less (for the unit itself), 135 mA or less (including the sensor input current when all outputs of sensors are ON) |
| 輸出 | Relay contact 1a - Switching capacity: 30 V 1 A DC (resistive load) - Min. applied load: 10 mV 10 μA DC - Electrical lifetime: 100,000 switching operations or more (rated load, switching frequency 20 operations/min.) - Mechanical lifetime: 50 million switching operations or more (switching frequency 180 operations/min.) |
| 輸出:短路保護 | The output relay is ON when the input signal from the sensor is ON Note : Even with only one leak detection sensor connected, an OFF signal is output if the sensor detects liquid leakage, or if the unit has been installed incorrectly. |
| 反應時間 | 5 ms or less (excluding the response time of the sensor) |
| Input No. | 8 Nos. [PNP output type sensors (leak detection sensors, general sensors) cannot be connected.] |
| Indicators : Normal | Green LED x 8 (light up when the sensor is connected to each channel and the connection setting switch is set to ON) |
| Indicators : Error | Red LED x 8 (light up when the leak liquid is detected by a sensor connected to each channel or a sensor is mounted improperly) |
| Indicators : Output | Orange LED (lights up when the output relay is ON (normal)) |
| Ambient temperature | -10 to +60 ℃ +14 to +140 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ - 4 to +158 ℉ |
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 材質 | Enclosure: ABS, Unit mounting base: POM, Terminal part: PBT |
| 電線 | 0.2 mm2 4-core cabtyre cable, 2 m 6.562 ft long |
| 延長電線 | Extension up to total less than 10 m 32.808 ft is possible, with 0.3 mm2, or more, cable. |
| 重量 | Net weight: 85 g approx. |
| Accessory | SL-CP1 (Snap male connector): 8 pcs., MS-SL-2 (Unit mounting base): 1 pc. |
