EX-F1|管道安裝式液面檢測感測器[放大器內藏] EX-F1
※ 實際商品可能與照片不同。
適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質
品名 | EX-F1 |
---|---|
型號 | EX-F1 |
產品 | Pipe-mountable Liquid Level Detection Sensor |
詳細 | Amplifier built-in, Pipe-mountable |
商品名稱 | 管道安裝式液面檢測感測器[放大器內藏] EX-F1 |
※為了商品改進,規格和外觀可能會在不事先通知的情況下變更,敬請諒解。
詳細規格
為了商品改進,規格和外觀可能會在不事先通知的情況下變更,敬請諒解。
項目 | 內容 |
---|---|
品名 | EX-F1 |
型號 | EX-F1 |
產品名 | Pipe-mountable Liquid Level Detection Sensor |
Regulatory compliance | EMC Directive, RoHS Directive |
Sensing object | Liquid (Note):Unclear or highly viscous liquid may not be detected stably. |
Applicable pipe diameter | Outer dia. ø6 to ø13 mm ø0.236 to ø0.512 in transparent resin pipe [PFA (Fluorine resin) or equivalently transparent pipe, wall thickness 1 mm 0.039 in ] (Note:Do not use the sensor with pipes other than the above specified.) |
Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
Current consumption | 30 mA or less (Note:Unclear or highly viscous liquid may not be detected stably.) |
Output | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) |
Output:Output operation | Switchable either Light-ON (Liquid-absent-ON) or Dark-ON (Liquid-present-ON) |
Output:Short-circuit protection | Incorporated |
Response time | 2 ms or less |
Operation indicator | Red LED (lights up when the output is ON) |
Ambient temperature | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ (Note:Liquid being detected should also be kept within the rated ambient temperature range.) |
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
Ambient illuminance | lncandescent light: 3,000 lx or less at the light-receiving face |
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
Vibration resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each |
Shock resistance | 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each |
Emitting element | Infrared LED (modulated) |
Material | Enclosure: Polycarbonate, Tying band: Nylon, Anti-slip tube: Silicone |
Cable | 0.1 mm2 3-core cabtyre cable, 1 m 3.281 ft long |
Cable extension | Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable. |
Weight | Net weight: 15 g approx., Gross weight: 60 g approx. |
Accessory | Tying band: 2 pcs., Anti-slip tube: 2 pcs. |