Panasonic Industry ／ 制御機器
MENU
Panasonic Industry ／ 制御機器

FX-551P-C2｜數位光纖感測器 FX-550

下載

※ 實際商品可能與照片不同。

適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質

品名

FX-551P-C2

型號

FX-551P-C2

產品

Digital Fiber Sensor

詳細

Amplifiers Cable type

商品名稱

 數位光纖感測器 FX-550

聯繫我們

※為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。

詳細規格

為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。
項目內容
品名FX-551P-C2
型號FX-551P-C2
產品名Digital Fiber Sensor
Applicable regulationsEMC Directive, RoHS Directive
Supply voltage12 to 24 V DC +10-15 % Ripple P-P 10 % or less
Power consumptionNormal operation : 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)
ECO mode : 680 mW or less (current consumption 28 mA or less at 24 V supply voltage)
Output<PNP output type>
PNP open-collector transistor
・Maximum source current : 100 mA
・Applied voltage : 30 V DC or less (between output and +V)
・Residual voltage : 2 V or less (at maximum source current)
Output:Output operationSwitchable either Light-ON or Dark-ON by L/D mode
Output:Short-circuit protectionIncorporated
Response timeFAST : 60μs or less, STD : 250μs or less, LONG : 2ms or less, U-LG : 4ms or less, HYPR : 24ms or less, selectable
Sensitivity setting2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment
Incident light sensitivity settingIncorporated, 4 steps
Incident light intensity display rangeFAST / STD : 0 to 4,000, LONG : 0 to 8,000, U-LG / HYPR : 0 to 9,999
Timer functionIncorporated with variable OFF-delay / ON-delay / One-shot / switchable either effective or ineffective
Timer function:Timer periodTimer range "ms" : 1 to 9,999 ms approx., 1 ms approx., Timer range "sec." : 1 to 32 s approx., 1 s approx.,
Timer range "1/10 ms" : 0.1 to 999.9 ms approx., 0.1 ms approx.
(Note): When set to LONG, U-LG, HYPR, IP-F or IP-R, the time range cannot be set to 1/10 ms.
Different frequency interference prevention functionIncorporated (up to 4 units). Note that the response time varies depending on the setting.
F-1 : 0.8 ms or less, F-2 : 0.9 ms or less, F-3 : 1.0 ms or less, F-4 : 1.7 ms or less
(Note): This function increases the hysteresis. Check the sensing condition when using the function.
ProtectionIP40(IEC)
Ambient temperature-10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are mounted in cascade : -10 to +50 ℃ +14 to +122 ℉ or if 8 to 16 units
are mounted in cascade : -10 to +45 ℃ +14 to +113 ℉)(No dew condensation or icing allowed), Storage : -20 to +70 ℃ -4 to +158 ℉
Vibration resistance10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each
Emitting element (modulated)Red LED (Peak emission wavelength : 660 nm 0.026 mil)
MaterialEnclosure, Case cover : Polycarbonate, Switch : Polyacetal
Cable0.2 mm2 3-core cabtyre cable, 2 m 6.562 ft long
Cable extensionExtension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (however, supply voltage 12 V DC or more)
WeightNet weight : 55 g approx., Gross weight : 90 g approx.
RemarkWhere measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.

MENU

最近搜尋過的產品

最近搜尋過的產品型號