Panasonic Industry ／ 制御機器
MENU
Panasonic Industry ／ 制御機器

FX-411P-C2｜數字光纖傳感器 FX-410(已停產)

下載

※ 實際商品可能與照片不同。

適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質

品名

FX-411P-C2

型號

FX-411P-C2

產品

Digital Fiber Sensor

商品名稱

 數字光纖傳感器 FX-410(已停產)

聯繫我們

※為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。

詳細規格

為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。
項目內容
品名FX-411P-C2
型號FX-411P-C2
產品名Digital Fiber Sensor
CE marking directive complianceEMC Directive, RoHS Directive
Supply voltage12 to 24 V DC ±10 % Ripple P-P 10 % or less
Power consumptionNormal operation: 960 mW or less (Current consumption 40 mA or less at 24 V supply voltage)
ECO mode: 840 mW or less (Current consumption 35 mA or less at 24 V supply voltage)
Output
PNP open-collector transistor
• Maximum source current: 100 mA (50 mA, if five, or more, amplifiers are connected in cascade)
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 1.5 V or less [at 100 mA sink current (50 mA, if five, or more, amplifiers are connected in cascade)]
Output:Output operationSwitchable either Light-ON or Dark-ON
Output:Short-circuit protectionIncorporated
Response time150 μs or less (FAST), 500 μs or less (STD), 4.5 ms or less (U-LG) selectable with setting switch
Operation indicatorOrange LED (lights up when the output is ON)
Stability indicatorGreen LED (lights up under stable light received condition or stable dark condition)
Timer functionIncorporated with variable ON-delay / OFF-delay / ONE SHOT timer, switchable either effective or ineffective.
[Timer period (Note): 1 ms to 3 sec. approx. (1 to 10 ms: Setting possible in units of 1 ms, 10 to 100 ms: Setting possible in units of 10 ms, 100 to 500 ms: Setting possible in units of 50 ms, 500 ms to 1 sec.: Setting possible in units of 100 ms, 1 to 3 sec.: Setting possible in units of 500 ms)]
(Note):For models manufactured up until June 2005, the timer period is approx. 1 to 500 ms.
Automatic interference prevention functionIncorporated (Up to four sets of fiber heads can be mounted close together. However, U-LG mode is 8 fiber heads.)
(Note:When the power supply is switched on, the light emission timing is automatically set for interference prevention.)
Ambient temperature–10 to +55 ℃ –14 to +131 ℉
(If 4 to 7 units are connected in cascade: –10 to +50 ℃ +14 to +122 ℉,
if 8 to 16 units are connected in cascade: –10 to +45 ℃ +14 to +113 ℉)
(No dew condensation or icing allowed), Storage: –20 to +70 ℃ –4 to +158 ℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminanceIncandescent light: 3,000 ℓx or less at the light-receiving face
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
(Note:The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.)
Insulation resistance20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
(Note:The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.)
Vibration resistance10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock resistance98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each
Emitting element (modulated)Red LED
Emitting element (modulated):Peak emission wavelength650 nm 0.026 mil
MaterialEnclosure: Heat-resistant ABS, Case cover: Polycarbonate
Cable lengthTotal length up to 100 m 328.084 ft (50 m 164.042 ft for 5 to 8 units, 20 m 65.617 ft for 9 to 16 units) is possible with 0.3 mm2, or more, cable.
WeightNet weight: 20 g approx., Gross weight: 30 g approx.

MENU

最近搜尋過的產品

最近搜尋過的產品型號