Panasonic Industry ／ 制御機器
MENU
Panasonic Industry ／ 制御機器

FX-311P｜手動設定型光纖感測器 FX-311

下載

※ 實際商品可能與照片不同。

適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質

品名

FX-311P

型號

FX-311P

產品

Manually Set Fiber Sensor

詳細

PNP output

商品名稱

 手動設定型光纖感測器 FX-311

聯繫我們

※為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。

詳細規格

為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。
項目內容
品名FX-311P
型號FX-311P
產品名Manually Set Fiber Sensor
Supply voltage12 to 24 V DC ±10 % Ripple P-P 10 % or less
Power consumption840 mW or less (Current consumption 35 mA or less at 24 V supply voltage)
OutputPNP open-collector transistor
• Maximum source current: 100 mA(50 mA, if five, or more, amplifiers are connected in cascade)
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 1.5 V or less[at 100 mA sink current (50 mA, if five, or more, amplifiers are connected in cascade)]
Output:Output operationSelectable either Light-ON or Dark-ON, with selection switch
Output:Short-circuit protectionIncorporated
Response time250 μs or less (STD / S-D), 2 ms or less (LONG) selectable with selection switch
Operation indicatorOrange LED (lights up when the output is ON)
Stability indicatorGreen LED (lights up under stable light received condition or stable dark condition)
Sensitivity adjuster12-turn potentiometer with indicator (Pointer part: red backlight)
(Note):The red backlight of the pointer part lights up more brightly when the power is turned ON and when the sensitivity is adjusted.
Timer functionIncorporated with OFF-delay timer, selectable either effective (approx. 10 ms or 40 ms) or ineffective
Automatic interference prevention functionIncorporated (Up to 4 sets of fiber heads can be mounted close together.)
(Note):When the power supply is switched on, the emission timing are automatically set for interference prevention.
Ambient temperature-10 to +55 ℃ -14 to +131 ℉
(If 4 to 7 units are connected in cascade: -10 to +50 ℃ +14 to +122 ℉, if 8 to 16 units are connected in cascade: -10 to +45 ℃ +14 to +113 ℉) (No dew condensation or icing allowed)
Storage: -20 to +70 ℃ -4 to +158 ℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminanceIncandescent light: 3,000 ℓx at the light-receiving face
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
Insulation resistance20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
Vibration resistance10 to 150 Hz frequency, 0.75 mm 0.03 in amplitude in X, Y and Z directions for two hours each
Shock resistance98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each
Emitting element (modulated)Red LED
Emitting element (modulated):Peak emission wavelength650 nm 0.026 mil
MaterialEnclosure: Heat-resistant ABS, Case cover: Polycarbonate
Connection methodConnector
(Note):The cable for amplifier connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below.
Main cable (3-core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)
Sub cable (1-core): CN-71-C1 (cable length 1 m 3.281 ft), CN-71-C2 (cable length 2 m 6.562 ft), CN-71-C5 (cable length 5 m 16.404 ft)
Cable lengthTotal length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
WeightNet weight: 15 g approx., Gross weight: 20 g approx.

MENU

最近搜尋過的產品

最近搜尋過的產品型號