High-speed / LED Sensing Fiber Sensor FX2

下載

基本資訊
Applications
Order guide
Specifications
Dimensions

預定停止接單

Last time buy (JST)

September 30, 2024

因諸多情況，終止下單時間可能會提前。敬請見諒。

------------------------------ Tab1 showing ------------------------------

基本資訊

UL已取得

UL : Recognition(FX2-A3R only)

聯繫我們

Features

High-speed response (FX2-A3R)

It has a high-speed response time of 15μs (in light receiving condition), and is suitable for detecting small objects or objects traveling at high-speed.
* FX2-A3R-LED response time is 50ms.

LED sensing (FX2-A3R-LED)

LED sensing type, which can detect weak lighting from LED, is also available.

Multi-rotational adjuster

The sensor has a multi-rotational adjuster for fine sensitivity adjustment. Moreover, the idling mechanism of the adjuster makes it free from damage due to over-turning.

------------------------------ Tab2 showing ------------------------------

------------------------------ Tab3 showing ------------------------------

[Note]
The following applicable products and options are available continuously.

Fiber head

Type	Shape of fiber head	Sensing range [Min. sensing object in ()]	Description	Fiber cable length	Model No.
Reflective type for high-speed sensing	Coaxial, Lens mountable M4	4 mm 0.157 in (ø0.05 mm ø0.002 in copper wire)	High-precision positioning thanks to a coaxial reflective type fiber	500 mm 19.685 in	FD-G500

Option

Designation	Model No.	Description
Pinpoint spot lens	FX-MR1	Enables detection of minute objects or small marks. ・Spot diameter: ø0.5 mm ø0.020 in approx. ・Distance to focal point: 6 ± 1 mm 0.236 ± 0.039 in ・Ambient temperature: -60 to +300 ℃ -76 to +572 ℉ ・Ambient humidity: 35 to 85 % RH

------------------------------ Tab4 showing ------------------------------

Specifications

Amplifiers

Type		High-speed type	LED sensing type
Model No.		FX2-A3R	FX2-A3R-LED
Supply voltage		12 V DC ± 10 % Ripple P-P 10 % or less	12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Power consumption		55 mA or less	20 mA or less
Output		NPN transistor universal ・Maximum sink current: 100 mA ・Residual voltage: 1.0 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current)
	Output operation	Selectable either Light-ON or Dark-ON, by the control input
Response time		In light state: 15 μs or less, In dark state: 35 μs or less	In light state: 50 ms or less, In dark state: 100 ms or less
Operation indicator		Red LED (lights up when the output is ON)
Sensitivity adjuster		3-turn endless potentiometer
Protection		IP66 (IEC) (Note 2)	IP62 (IEC)
Ambient temperature		-10 to +50 ℃ -14 to +122 ℉ (FX2-A3R-LED: 0 to +50℃ +32 to +122 ℉) (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
Ambient illuminance		500 lx	-
Emitting / Receiving element		Emitting element: Red LED (Peak emission wavelength: 660 nm 0.026 mil, non-modulation)	Receiving element: Photodiode (Peak wavelength: 590 nm 0.023 mil)
Material		Polycarbonate
Weight		Net weight: 120 g approx.
Dimensions		W14 x H30 x D56 mm W0.551 x H1.181 x D2.205 in
Accessories		MS-FX-1 (Amplifier mounting bracket): 1 set, Adjusting screwdriver: 1 pc., Adjusting knob: 1 pc.

Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2) This is the value when the combination fiber has been attached. However, the value is IP65 when combined with the free-cut type fiber.
3) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.

------------------------------ Tab5 showing ------------------------------

High-speed / LED Sensing Fiber Sensor FX2

基本資訊