Panasonic Industry / 制御機器
Panasonic Industry / 制御機器

External Input Unit for Digital Sensor FX-CH2

  • 基本資訊

  • Order guide

  • Specifications

  • Dimensions

------------------------------ Tab1 showing ------------------------------

基本資訊

Operations by remote. Teaching and setting changes can be performed using the PLC and touch panel.

CE,UKCA已取得

------------------------------ Tab2 showing ------------------------------

Order guide

Product lineup

Product lineup

  • Input signal Set the type of input operation with S1 and S2, and the input timing with S3.
  • MODE switching Switch the MODE line between Low/High to select "External teaching and key lock" or "Data bank switching" for the input mode.

*FX-CH2(-P) does not include a cable for connecting to the input device.

Designation Model No.
External input unitNPN input typeFX-CH2
PNP input typeFX-CH2-P
Connector for input device
(1 pc. included as standard with external input unit)
CN-EP1
[5 pcs. per set]
Quick-connection cable (Main cable)
(Note)
Length: 1 m 3.281 ftCN-73-C1
 Length: 2 m 6.562 ftCN-73-C2
 Length: 5 m 16.404 ftCN-73-C5
End plateMS-DIN-E
[2 pcs. per set]

Note:Quick-connection cable is not supplied with the external input unit. Please order it separately.

------------------------------ Tab3 showing ------------------------------

Specifications

TypeNPN inputPNP input
Model No.FX-CH2FX-CH2-P
Applicable sensorsFX-301(P) (Note 2), FX-305(P)
Supply voltage12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Power consumption600 mW or less (when all indicators light up)
InputLow: 0 to +2 V DC
Source current 0.5 mA
Input impedance 10 kΩ approx.
High: +5 V to +V DC, or open
High: +4 V to +V DC
Sink current 0.5 to 3 mA
Input impedance 10 kΩ approx.
Low: 0 to +0.6 V DC, or open
Power indicatorGreen LED (Lights up when the power is ON)
Transmission
operation indicator
Green LED
(Lights up when loaded, and 2-level / Limit teaching, blinks → lights up when saved, and Full-auto teaching)
Ambient temperature-10 to +55 ℃ +14 to +131
(If 4 to 7 sensors are connected in cascade: -10 to +50 ℃ +14 to +122 , if 8 to 16 sensors are connected in cascade: -10 to +45 ℃ +14 to +113 )
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158
MaterialEnclosure: Heat-resistant ABS
Connection methodConnector (Note 3)
WeightNet weight: 20 g approx., Gross weight: 40 g approx.
DimensionsW10 x H27 x D68.5 mm W0.394 x H1.063 x D2.697 in
AccessoryCN-EP1 (Connector for input device) (Note 4): 1 pc.

Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 .
2) Only updated version of FX-301(P) can be used. Do not use the previous version of FX-301(P).
The updated version of FX-301(P) have "NAVI" printed on one side. (See the right figure.)

3) The cable for unit connection is not supplied as an accessory. Be sure to use the optional quick-connection cables given below.
Main cable (3-core):
CN-73-C1 (cable length 1 m 3.281 ft)
CN-73-C2 (cable length 2 m 6.562 ft)
CN-73-C5 (cable length 5 m 16.404 ft)
4) The applicable wire is 0.08 mm2 (AWG 28) to 0.5 mm2 (AWG 20) and the wire sheath diameter should be ø1.5 mm ø0.059 in or less.
5) Make sure that FX-CH2(-P) should be mounted to a 35 mm 1.375 in width DIN rail.

------------------------------ Tab4 showing ------------------------------

Dimensions

  • Unit: mm in

FX-CH2 FX-CH2-P

External input unit

pic01-1

 

MENU

最近搜尋過的產品

最近搜尋過的產品型號