Panasonic Industry ／ 制御機器
MENU
Panasonic Industry ／ 制御機器

NA40-8-H｜40mm光軸間距通用區域感測器 NA40(已停產)

下載

停止接單

停產時期 (JST)

※ 實際商品可能與照片不同。

適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質

    品名

    NA40-8-H

    型號

    NA40-8-H

    產品

    40 mm Beam Pitch General Purpose Area Sensor

    詳細

    With spatter protection hood

    商品名稱

    		 40mm光軸間距通用區域感測器 NA40(已停產)
    替代產品
    替代品號
    替代型號
    備註

    詳細規格

    項目內容
    品名NA40-8-H
    型號NA40-8-H
    產品名40 mm Beam Pitch General Purpose Area Sensor
    顯示價格Please contact our office
    Sensing height280 mm 11.024 in
    Sensing range5 m 16.404 ft
    Beam pitch40 mm 1.575 in
    Sensing objectø60 mm ø2.362 in or more opaque object
    Supply voltage12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
    Current consumptionEmitter: 30 mA or less
    Receiver: 60 mA or less
    Sensing outputNPN open-collector transistor
    • Maximum sink current: 100 mA
    • Applied voltage: 30 V DC or less (between sensing output and 0 V)
    • Residual voltage: 1.6 V or less (at 100 mA sink current)
    Sensing output:Output operationON when all beam channels are received / OFF when one or more beam channels are interrupted
    Sensing output:Short-circuit protectionIncorporated
    Self-diagnosis outputNPN open-collector transistor
    • Maximum sink current: 50 mA
    • Applied voltage: 30 V DC or less (between self-diagnosis output and 0 V)
    • Residual voltage: 1.6 V or less (at 50 mA sink current)
    Self-diagnosis output:Output operationOFF when unstable light received condition continues for 5 sec. or more, or the output transistor fails
    Self-diagnosis output:Short-circuit protectionIncorporated
    Response time12 ms or less
    IndicatorIncorporated with the three color indicators on the receiver
    • Sensing output operation indicator: Red LED (lights up when one or more beam channels are interrupted)
    • Stable incident beam indicator: Green LED (lights up when all beam channels are received stably)
    • Unstable incident beam indicator: Yellow LED (lights up when one or more beam channels are received unstably)
    * When the output transistor fails, the three color indicators blink simultaneously.
    Interference prevention functionIncorporated (Two units of sensors can be mounted close together.)
    ProtectionIP65 (IEC)
    Ambient temperature–10 to +50 ℃ +14 to +122 ℉ (No dew condensation or icing allowed), Storage: –10 to +60 ℃ +14 to +140 ℉
    Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
    Ambient illuminanceIncandescent light: 3,500 ℓx or less at the light-receiving face
    Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
    Insulation resistance20 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
    Vibration resistance10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
    Shock resistance100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each
    Emitting elementInfrared LED (synchronized scanning system)
    MaterialProtection enclosure: Aluminum
    Unit case: ABS
    Front cover: Acrylic
    Lens: Acrylic
    Cable extension0.5 mm2 4-core (emitter: 3-core) cabtyre cable, 0.5 m 1.640 ft long, with a round connector at the end
    * Use together with the optional mating cable
    Weight(Total weight of emitter and receiver)800 g approx.
    AccessoriesMS-NA40-1 (Sensor mounting bracket): 1 set for emitter and receiver
    Adjusting screwdriver: 1 pc.

    MENU

    最近搜尋過的產品

    最近搜尋過的產品型號