Panasonic Industry ／ 制御機器
MENU
Panasonic Industry ／ 制御機器

NA2-N28｜通用超薄型區域感測器 NA2-N

下載

※ 實際商品可能與照片不同。

適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質

品名

NA2-N28

型號

NA2-N28

產品

General Purpose & Slim Body Area Sensor

詳細

NPN output

商品名稱

 通用超薄型區域感測器 NA2-N

聯繫我們

※為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。

詳細規格

為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。
項目內容
品名NA2-N28
型號NA2-N28
產品名General Purpose & Slim Body Area Sensor
顯示價格Please contact our office
CE marking directive complianceEMC Directive, RoHS Directive
Sensing height540 mm 21.260 in
Sensing range5 m 16.404 ft
Beam pitch20 mm 0.787 in
Sensing objectdia. 30 mm dia. 1.181 in or more opaque object (completely beam interrupted objects)
Supply voltage12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Power consumption:Emitter:Job indicator ON1.2 W or less
Power consumption:Emitter:Job indicator OFF1.1 W or less
Power consumption:Receiver:Job indicator ON1.2 W or less
Power consumption:Receiver:Job indicator OFF1.1 W or less
OutputNPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Output:Utilization categoryDC-12 or DC-13
Output:Output operationON when all beam channels are received (OFF when one or more beam channels are interrupted)
Output:Short-circuit protectionIncorporated
Response time10 ms or less (12 ms or less when the interference prevention function is used)
Indicators:EmitterEmitting indicator: Green LED x 2 (light up during emission; one LED lights up for Frequency A setting, both LEDs light up for Frequency B setting)
Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch)
Indicators:ReceiverOperation indicator: Red LED (lights up when one or more beam channels are interrupted)
Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)
Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch)
* When an excess current flows through the output, the stable incident beam indicator and the operation indicator on the receiver blink simultaneously due to operation of the short-circuit protection circuit.
Interference prevention functionIncorporated
Test input (emission halt) functionIncorporated
Pollution degree3 (Industrial environment)
ProtectionIP40(IEC)
Ambient temperature-10 to +55 degrees +14 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -10 to +60 degrees +14 to +140 degrees Fahrenheit
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminanceIncandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting elementInfrared LED (Peak emission wavelength: 870 nm 0.034 mil, modulated) (Note：Peak emission wavelength has been changed from production in March, 2017.)
MaterialEnclosure: Heat-resistant ABS
Lens cover: Polyester
Indicator cover: Acrylic
Cable0.2 mm2 4-core cabtyre cable, 3 m 9.843 ft long
Cable extensionExtension up to total 25 m 82.021 ft is possible for both emitter and receiver, with 0.2 mm2, or more, cable.
Weight(Total weight of emitter and receiver)Net weight: 650 g approx.
Gross weight: 800 g approx.

MENU

最近搜尋過的產品

最近搜尋過的產品型號