MDME102S1C｜MINAS A5 Family Servo Motor (Discontinued)
Download
Discontinued
Last time buy (JST)
*Photo may vary from actual product.
This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.
| Part Number | MDME102S1C |
|---|---|
| Product | Servo Motor |
| Details | Middle inertia, Connector type, IP67 |
| Product Name | MINAS A5 Family Servo Motor (Discontinued) |
| Features | 10 W to 7.5 kW, Input power supply for Driver: Voltage DC 24 V/48 V・AC 100 V/200 V/400 V, 20 bit incremental・17 bit Absolute/Incremental encoder, Frequency response 2.3 kHz |
Spec Detail
| Item | Specifications |
|---|---|
| Part Number | MDME102S1C |
| Product details | Middle inertia, Connector type, IP67 |
| Family Name | MINAS A5 |
| Series | MDME Series |
| Type | Middle inertia |
| Protection class | IP67 |
| About Enclosure | Except rotating portion of output shaft and connecting pin part of the motor connector and the encoder connector. |
| Environmental Conditions | For more details, please refer to the instruction manual. |
| Flange sq. dimension | 130 mm sq. |
| Flange sq. dimension (Unit:mm) | 130 |
| Motor lead-out configuration | Connector |
| Motor encoder connector | Connector |
| Power supply capacity (kVA) | 1.8 |
| Voltage specifications (V) | 200 |
| Rated output (W) | 1000 |
| Rated current (A (rms)) | 5.7 |
| Holding brake | without |
| Mass (kg) | 5.2 |
| Oil seal | with |
| Shaft | Round |
| Rated torque (N ⋅ m) | 4.77 |
| Momentary Max. peak torque (N ⋅ m) | 14.3 |
| Max. current (A (o-p)) | 24 |
| Regenerative brake frequency (times/min) | Without option :No limit With option :No limit Option (External regenerative resistor) Part No. : DV0P4284 |
| About regenerative brake frequency | Please refer to the details of [Motor Specification Description] , Note: 1, and 2. |
| Rated rotational speed (r/min) | 2000 |
| Rated rotational Max. speed (r/min) | 3000 |
| Moment of inertia of rotor ( x10-4 kg ⋅ m²) | 4.60 |
| Recommended moment of inertia ratio of the load and the rotor | 10 times or less |
| About recommended moment of inertia ratio of the load and the rotor | Please refer to the details of [Motor Specification Description] ,Note: 3. |
| Rotary encoder: specifications | 17-bit Absolute/Incremental system |
| Notice | When using a rotary encoder as an incremental system (not using multi-turn data), do not connect a battery for absolute encoder. |
| Rotary encoder: Resolution | 131072 |
Permissible load
| Item | Specifications |
|---|---|
| During assembly: Radial load P-direction (N) | 980 |
| During assembly: Thrust load A-direction (N) | 588 |
| During assembly: Thrust load B-direction (N) | 686 |
| During operation: Radial load P-direction (N) | 490 |
| During operation: Thrust load A, B-direction (N) | 196 |
| About permissible load | For details, refer to the [Motor Specification Description] "Permissible Load at Output Shaft". |
Applicable Driver
| Part Number | Series | Type | I/F Classification of type | Frame | Supply voltage |
|---|---|---|---|---|---|
Ⅾiscontinued | A5 series | Speed, Position, Torque, Full-closed type | Analog/Pulse | D-Frame | Single/3-phase 200 V |
Ⅾiscontinued | A5E series | Position control type | Pulse train only | D-Frame | Single/3-phase 200 V |
Ⅾiscontinued | A5ⅡN series | RTEX, Ultra high-speed Network | RTEX | D-Frame | Single/3-phase 200 V |
Ⅾiscontinued | A5ⅡN series | RTEX, Ultra high-speed Network | RTEX | D-Frame | Single/3-phase 200 V |
Ⅾiscontinued | A5Ⅱ series | Speed, Position, Torque, Full-closed type | Analog/Pulse | D-Frame | Single/3-phase 200 V |
Ⅾiscontinued | A5ⅡE series | Position control type | Pulse train only | D-Frame | Single/3-phase 200 V |
Torque charactristics
Dotted line represents the torque at 10 % less supply voltage.
Dimensions
[Unit: mm]
* The external dimension is common between With or Without the brake.