Panasonic Industry / Automation Controls
Panasonic Industry / Automation Controls

PV500V2 (Discontinued Products)

  • Discontinued Products

  • System Configuration

  • Specifications

  • Dimensions

Ⅾiscontinued

Last time buy (JST)

September 30, 2021

We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.

------------------------------ Tab1 showing ------------------------------

Discontinued Products

pic01

------------------------------ Tab2 showing ------------------------------

System Configuration

------------------------------ Tab3 showing ------------------------------

Specifications

General specifications

ItemSpecifications
Rated operating voltage24 V DC
Operating voltage range21.6 to 26.4 V DC (including ripples)
Rated current consumption1.5 A max. (2-camera type) / 2.0 A max. (4-camera type)
Ambient temperature during use2-camera type: 0 to +45 ℃ +32 to +113 ℉ (no freezing or condensation)
4-camera type: 0 to +40 ℃ +32 to +104 ℉ (no freezing or condensation)
Storage ambient temperature-20 to +60 ℃ -4 to +140 ℉ (no freezing or condensation)
Ambient humidity during use35 to 85 % RH (at 25 ℃ 77 ℉, no freezing or condensation)
Storage ambient humidity35 to 85 % RH (at 25 ℃ 77 ℉, no freezing or condensation)
Noise immunity1,000 V, Pulse width: 50 ns, 1 μs (using the noise simulator method)
Vibration resistance10 to 55 Hz, 1 sweep/min, double amplitude of 0.75 mm 0.030 in, 30 minutes each in the X, Y, and Z directions
Shock resistance196 m/s2, 5 times each in the X, Y and Z directions
Insulation resistance
(initial value)
100 Ω or higher (measured by a 500 V DC megger)
Input and output terminals – Power and ground terminals
Input and output terminals – Non-energized metal part
Power terminal – Non-energized metal part
Breakdown voltage
(initial value)
500 V AC for 1 min (600 V AC for 1 sec), Cutoff current: 10 mA
(Note) Input and output terminals – Power and ground terminals
Input and output terminals – Non-energized metal part
Power terminal – Non-energized metal part
Battery lifeApprox. 10 years (at 25 ℃ 77 ℉)
WeightApprox. 1.6 kg (with terminal blocks and connectors)
Note : The evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the unit.

Functional specifications

ItemSpecifications
Input/
Output
CamerasFrom the quad-speed 300,000-pixel camera (640 x 480) and 2,000,000-pixel camera (1,600 x 1,200) up to two and four cameras can be attached to the 2-camera type and 4-camera type units respectively.
Monitor outputXGA (1,024 x 768) output
Memory cardSD memory card
SerialRS-232C x 1, Ethernet x 1
PLC link function supported models:
Panasonic Industry's FP series PLCs,
Mitsubishi Electric: A, Q, FX (FX1N) and FX-2N (FX2N, FX3U, FX3UC) series
OMRON: C, CV and CS1 series
Allen-Bradley: SLC500
Fuji Electric: MICREX-SX SPH series
USBCompatible USB2.0, AB type
ParallelPhoenix terminals: 14 inputs / 15 outputs
MIL terminals: 32 inputs / 32 outputs
Keypad input1 connector for dedicated keypad (ANPVP**)

Image processing functional specifications

ItemSpecifications
Menu displayEight languages (nine fonts) switchable
Monitor display (XGA)Split-screen display of up to four camera images
Image display: Through/Memory/NG object images
Display effects: Gray scale/
Binarization group/Preprocessing group
Zoom function (2 to 400 %)
Display area (1,024 x 768). 16,770,000 colors
Processing methodsGray scale processing, binary processing
カNumber of connected cameras2-camera type: Up to two cameras, 4-camera type: Up to four cameras
(Select from: Quad-speed 300,000-pixel camera and 2,000,000-pixel camera)
Camera connectionMini camera link connector for connection by camera link (PoCL)
Trigger inputSelect from: All cameras, individual cameras, detection trigger (all)
Capture methodFrame mode only. Partial capture of up to two portions.
In partial capture mode, the minimum capture area to be set for the quad-speed 300,000-pixel cameras is one line, and that for the 2,000,000-pixel camera is 100 lines.
Shutter speed30 μs to 1,000 ms (Set in increments of 10 μs)
Gain setting range0.25 to 1.0
No. of product types25,600 types max. (depends on setting data)
Inspection functions
(Checkers)
1,000 checkers/product type max. (depends on setting data)
• Position Adjustment, Position/Rotation Adjustment, Rotation Adjustment, Area Size Adjustment • Smart Edge (Circle) / (Line) function added. • Binary Window, Gray Window, Binary Edge
• Gray Edge, Feature Extraction, Smart Matching, Line, Flaw Detection
• Connector (Binary Window) / (Gray Window) / (Gray Edge)
• Smart Edge (Circle) / (Line) • Geometry Calculation
• Character/Figure Drawing
Inspection operation modeSequential processing :
Mode compatible with the conventional model. After completing the result output, the next image capture for inspection can be started.
Parallel processing :
After completing the first image capture, the image capture for the next inspection can be started immediately. Image capture and inspection can be processed concurrently.
Binarization level group26 levels/product type, 256-gray scale (0 to 255)
Preprocessing filtersPreprocessing filters: 21 types
For each product type, 5 groups/camera, 10 stages max.
(Dilation, Erosion, Erosion → Dilation, Dilation → Erosion, Auto Correction, Gray Cut, Area Averaging, Correction Settings, Median, Smoothing, Sobel, Prewitt, Laplacian, Edge Extraction X, Edge Extraction Y, Sharpen, Tophat, Dynamic, Frequency Extraction, Rotation, and Reflect)
Processing resolution2,000,000-pixel camera: 1,600 horizontal x 1,200 vertical pixels
Quad-speed 300,000-pixel camera: 640 horizontal x 480 vertical pixels
Numerical computation1,000 formulae/product type max., including those for evaluation result output (depends on setting data) Calculations involving output values of inspection functions
OperatorsFour fundamental operations (+, -, ×, ÷), bracket operations, trigonometric functions (14 types), comparison functions (6 types), math functions (15 types), geometric functions (18 types)
Statistic data
operation items
Scan count / Pass count / Fail count / Average / Distribution / Max. / Min. / Range / Pass average / Pass distribution / Pass max. / Pass min. / Pass range / Fail average / Fail distribution / Fail max. / Fail min. / Fail range User limit: 1000 items/product type max.
Other operation itemsPrevious data of numerical computation and evaluation result outputs, general-purpose registers
Number of substitution items16 items/formula
Evaluation result output1,000 formulae/product type max., including those for numerical computation (depends on setting data) Substitution for and logical calculation of evaluation results from checkers and numerical computations
OperatorsNOT / AND / OR / XOR / Brackets
Number of substitution items16 items/formula
OthersOverall evaluation condition setting, Image storing condition setting, Image output condition setting, Parallel output setting (8 outputs from OUT 0 to OUT 7 and 16 outputs from OUT 0 to OUT 15, or all setting output)
Data R/WFour-window display of up to 80 (5x16) cells/product type on screen in table form in RUN mode.
Substitution of title input, checker conditions/results, numerical computation results, numerical computation evaluation results, evaluation output results, statistical results possible. Change of upper/lower limits of numerical computation in the table in RUN mode possible.
Conversion dataCoordinates, coordinate origin, horizontal and vertical coefficients can be set for each camera to obtain actual dimensions.
OthersComment input
Marker8 markers/product type max. for each camera Graphic display on the operation screen Selectable from eight colors
ShapesRectangle / Circle / Ellipse / Polygon / Straight line / Cross line
Collective movementCollective movement of set checkers in units of position/rotation correction groups. Set the movement to Yes/No. Position and rotation correction checkers cannot be moved.
TemplateRe-registration positionSetting position/Correction position
Re-registration settingDisplayYes / No
Execution modeExecution allExecution of all checkers
Branch executionBranch blocks (0 to 9) can be set.
Designated executionBlocks to be executed (0 to 9) can be set.

------------------------------ Tab4 showing ------------------------------

Dimensions

Unit: mm in

Controller unit

Controller unit
ANPVP050**** (4-camera type)

Camera

Quad-speed camera ANPVC1040 / 2-megapixel camera ANPVC1210

0.3M grey compact camera (Triple-speed) ANPVC5030

Camera cable

Camera cable

Flexible camera cable

Camera lenses

0.3M camera lenses

ANB842NL

ANB842NL

ANB843L

ANB843L

ANB845NL

ANB845NL

ANB846NL

ANB846NL

ANB847L

ANB847L

ANM88161

ANM88161

ANM88251

ANM88251

ANM88501

ANM88501

2-megapixel camera lenses

ANPVL162

ANPVL162

ANPVL252

ANPVL252

ANPVL502

ANPVL502

Adapter rings

Adapter ring

Monitor/Monitor cable

XGA monitor
ANPVM11021

VGA/XGA monitor cable

Operation keypad

Operation keypad
ANPVP**

MENU

Recently checked products

Recently checked product numbers