Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

SF4D-F63-01｜Compact & Robust Safety Light Curtain [Type 4 PLe SIL3] SF4D

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

SF4D-F63-01

Part Number

SF4D-F63-01

Product

Safety Light Curtain [Type 4 PLe SIL3]

Details

Min. sensing object ø14 mm ø0.551 in (10 mm 0.394 in beam pitch)

Product Name

 Compact & Robust Safety Light Curtain [Type 4 PLe SIL3] SF4D

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberSF4D-F63-01
Product NumberSF4D-F63-01
Products NameSafety Light Curtain [Type 4 PLe SIL3]
Product detailsMin. sensing object ø14 mm ø0.551 in (10 mm 0.394 in beam pitch)
No. of beam channels63
Protective height630 mm
24.803 in
(Note): When using as a safety device for a press machine in China or when using SF4D-□-01 as a safety device for a press machine or paper shearing machine in Japan, the length from the center of the first beam channel to the center of the last beam channel become to be protective height.
Protective height : When using as safety equipment for Chinese press machine or when using for Japanese press machine or paper shearing machine620 mm
24.409 in
(Note): When using as a safety device for a press machine in China or when using SF4D-□-01 as a safety device for a press machine or paper shearing machine in Japan, the length from the center of the first beam channel to the center of the last beam channel become to be protective height.
Current consumptionEmitter : 120 mA or less
Receiver : 150 mA or less
PFHD2.99×10-9
MTTFD396 years or more
Weight(Total of emitter and receiver)1,500g approx.
Applicable standards:International standardIEC 61496-1/2 (Type 4), ISO 13849-1:2015 (Category 4, PLe), IEC 61508-1 to 3 (SIL3)
Applicable standards:JapanJIS B 9704-1/2 (Type 4), JIS B 9705-1 (Category 4), JIS C 0508-1 to 3 (SIL3)
Applicable standards:EuropeEN ISO 13849-1:2015 (Category 4, PLe), EN 55011, EN 61000-6-2, EN IEC 63000
Applicable standards:North AmericaANSI/UL 61496-1/2 (Type 4),CAN/CSA C22.2 No.14, CAN/CSA E61496-1/2
Applicable standards:ChinaGB/T 4584
Applicable regulations and certificationsCE Marking (Machinery Directive, EMC Directive, RoHS Directive) , UKCA Marking (Machinery Regulations, EMC Regulations, RoHS Regulations), TÜV SÜD certification (U.S.A., Canada), OSHA 1910.212, OSHA 1910.217(C), ANSI B11.1 to B11.19, ANSI/RIA 15.06
Operating rangeShort mode : 0.2 to 7 m 0.656 to 22.966 ft
Long mode : 0.8 to 12 m 2.625 to 39.370 ft
(selectable by DIP switch)
(Note): The operating range is the possible setting distance between the emitter and the receiver.
Min. sensing objectø14 mm ø0.551 in opaque object
(Note): When the floating blanking function is used, the size of the minimum sensing object varies. For the detail, refer to the section on Safety distance.
Effective aperture angle±2.5° or less at a sensing range of 3 m 9.843 ft or longer (based on IEC 61496-2)
Power voltage24 V DC+20-30 % Ripple P-P 10 % or less (excluding voltage drop due to cable)
(Note): In consideration of the voltage drop caused by the cable, use Control output (OSSD 1, OSSD 2) source / sink current and cable length as a guideline.
Control outputs (OSSD 1, OSSD 2)PNP open-collector transistor / NPN open collector transistor (selectable)

<PNP output selected>
・Maximum source current : 350 mA
・Applied voltage : Same as supply voltage
(between control output and +V)
・Residual voltage : 2 V or less (source current 350 mA)
(excluding voltage drop due to cable)
・Leakage current : 0.2 mA or less (including power OFF state)
・Maximum load capacity : 2.2 μF
・Load wiring resistance : 3 Ω or less

<NPN output selected>
・Maximum sink current : 350 mA
・Applied voltage : Same as supply voltage
(between control output and 0 V)
・Residual voltage : 2 V or less (sink current 350 mA)
(excluding voltage drop due to cable)
・Leakage current : 0.2 mA or less (including power OFF state)
・Maximum load capacity : 2.2 μF
・Load wiring resistance : 3 Ω or less
Control outputs (OSSD 1, OSSD 2):Operation modeON when all beams are received, OFF when one or more beams are blocked
(Also OFF when internal sensor error or synchronization signal error occurs)
(Note): Note that the setting cannot be changed when SF4D-□-01 is used.
Control outputs(OSSD1, OSSD2):Protection circuitIncorporated
Control output(OSSD 1, OSSD 2):Response timeOFF response : 10 ms or less (Not connected in series / parallel), 18 ms or less (Connected in series / parallel)(Note 1)
ON response : 50 ms or less (Note 2)(Note 3)
(Note 1): For response times by number of beams, refer to the Control output (OSSD 1, OSSD 2) OFF response times.
(Note 2): Because the control output (OSSD 1, OSSD 2) must be OFF for at least 80 ms, the ON response will be delayed more than 50 ms when the light blocked time is less than 30 ms.
(Note 3): When optical synchronization is selected, if the beam axes of both the top end and bottom end are blocked, the ON response speed decreases by as much as 1 sec.
Auxiliary output (AUX)(Non-safety output)PNP open-collector transistor / NPN open collector transistor (selectable)

<PNP output selected>
・Maximum source current : 60 mA
・Applied voltage : Same as supply voltage
(between auxiliary output and +V)
・Residual voltage : 2 V or less (source current 60 mA)
(excluding voltage drop due to cable)
・Leakage current : 0.2 mA or less (including power OFF state)

<NPN output selected>
・Maximum sink current : 60 mA
・Applied voltage : Same as supply voltage
(between auxiliary output and 0 V)
・Residual voltage : 2 V or less (sink current 60 mA)
(excluding voltage drop due to cable)
・Leakage current : 0.2 mA or less (including power OFF state)
Auxiliary output (AUX)(Non-safety output) : Operation modeControl output ON : OFF, Control output OFF : ON
(Note): Note that the setting cannot be changed when SF4D-□-01 is used.
Auxiliary output (AUX)(Non-safety output) : Protection circuitIncorporated
Auxiliary output (AUX)(Non-safety output) : Response timeOFF response : 60 ms or less, ON response : 60 ms or less
Synchronization methodLine synchronization / optical synchronization (selectable by DIP switch)
Interference prevention function<Not connected in series/parallel>
・Line synchronization : 2 units or less (auto)
・Optical synchronization : 2 units or less (selectable by DIP switch)

<Connected in series/parallel>
・Series connection : 5 units or less (total number of beam channels 256 or less)
・Parallel connection : 3 units or less (total number of beam channels 192 or less)(Note)
・Series / parallel connection mixed : 5 units or less (total number of beam channels 144 or less)(Note)
(Note): Note that the setting cannot be changed when SF4D-□-01 is used.
Test input functionIncorporated
Interlock functionIncorporated [Manual reset / auto reset (selectable by wiring)] (8-core cable or 12-core cable)
Lockout release functionIncorporated
External device monitoring functionIncorporated (8-core cable or 12-core cable)
Application indicator functionIncorporated (only the receiver lights up when optical synchronization is used)
Muting functionIncorporated (12-core cable)
Override functionIncorporated (12-core cable)
Power save functionIncorporated
Optional functionsOptional functions cannot be used when SF4D-□-01 is used.
Pollution degree3
Operating altitude2,000 m 6,561.68 ft or less
(Note): Do not use or store in an environment pressurized to atmospheric pressure or higher at an altitude of 0 m.
Environmental resistance:Degree of protectionIP67, IP65 (IEC), NEMA Type 13 (NEMA 250)
Environmental resistance:Ambient temperature-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage : -25 to +60 ℃ -13 to +140 ℉
Environmental resistance:Ambient humidity30 to 85 % RH, Storage : 30 to 95 % RH
Ambient illuminanceIncandescent light : 5,000 ℓx or less at the light-receiving surface
Environmental resistance:Voltage withstandability1,000 V AC for one minute, between all supply terminals connected together and enclosure
Environmental resistance:Insulation resistance20 MΩ, or more, with 500 V DC megger, between all supply terminals connected together and enclosure
Environmental resistance:Vibration resistance10 to 55 Hz, 0.75 mm 0.030 in double amplitude in X, Y, and Z directions for two hours each
Malfunction resistance 10 to 55 Hz, 0.75 mm 0.030 in double amplitude in X, Y, and Z directions twenty times each
Environmental resistance:Shock resistance300 m/s2 acceleration (30 G approx.) in X, Y, and Z directions three times each
Malfunction resistance 100 m/s2 acceleration (10 G approx.) in X, Y, and Z directions 1,000 times each
SFF (Safe Failure Fraction)99%
HFT (Hardware Fault Tolerance)1
Subsystem typeType B (IEC 61508-2)
T1 (proof test interval)20 years
Failure response timeWithin response time (OFF response)
Safety stateControl output (OSSD 1 / 2) OFF state
Emitting elementInfrared LED (peak emission wavelength : 850 nm 0.0335 mil)
MaterialEnclosure : Aluminum, Detection surface : Polycarbonate resin and stainless steel (SUS304), Upper cap / lower cap : Nylon
Connecting methodBy connector
Cable extensionTotal length of emitter / receiver can be extended up to 70 m 229.659 ft each using optional mating cable (including the length
of series mating cables)
(Note): In consideration of the voltage drop caused by the cable, use Control output (OSSD 1, OSSD 2) source / sink current and cable length as a guideline.
AccessoriesSF4B-TR14 (test rod) : 1 pc.
RemarkWhere measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉.
PFHD : Probability of Dangerous Failure per Hour, MTTFD : Mean Time to Dangerous Failure (in years).

MENU

Recently checked products

Recently checked product numbers