Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

SF-CL1T264T｜CC-Link Safety System Remote I/O Unit for Light Curtain SF-CL1T264T(Discontinued)

Download

Discontinued

Last time buy (JST)

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Product Number

    SF-CL1T264T

    Part Number

    SF-CL1T264T

    Product

    CC-Link Safety System Remote I/O Unit for Light Curtain

    Product Name

    		 CC-Link Safety System Remote I/O Unit for Light Curtain SF-CL1T264T(Discontinued)
    Substitute
    Sub Prod No.
    Sub Part No.
    Remark

    Spec Detail

    ItemSpecifications
    Part NumberSF-CL1T264T
    Product NumberSF-CL1T264T
    Products NameCC-Link Safety System Remote I/O Unit for Light Curtain
    The price of the productPlease contact our office
    Connectable safety light curtainsSF4B series
    Applicable standardsIEC 61508 SIL 3
    Unit power:Supply voltage24 V DC plus or minus 10 % Ripple P-P 10 % or less
    (Note) The power supply connected to this product must satisfy the following conditions
    1 SELV (Safety Extra Low Voltage): Reinforced insulated from hazardous potential part (48 V or more)
    2 Compliance with the LVD (Low Voltage Directive)
    3 Output voltage within 21.6 V to 26.4 V DC (Ripple P-P: 10 % or less.)
    Unit power:Current consumption140 mA or less (24 V DC, with all points ON)
    (Note) The power supply connected to this product must satisfy the following conditions
    1 SELV (Safety Extra Low Voltage): Reinforced insulated from hazardous potential part (48 V or more)
    2 Compliance with the LVD (Low Voltage Directive)
    3 Output voltage within 21.6 V to 26.4 V DC (Ripple P-P: 10 % or less.)
    Unit power:Protective functionUnit power overvoltage / overcurrent protection function
    (Note) The power supply connected to this product must satisfy the following conditions
    1 SELV (Safety Extra Low Voltage): Reinforced insulated from hazardous potential part (48 V or more)
    2 Compliance with the LVD (Low Voltage Directive)
    3 Output voltage within 21.6 V to 26.4 V DC (Ripple P-P: 10 % or less.)
    Unit power:Fuse0.8 A (Not replaceable)
    (Note) The power supply connected to this product must satisfy the following conditions
    1 SELV (Safety Extra Low Voltage): Reinforced insulated from hazardous potential part (48 V or more)
    2 Compliance with the LVD (Low Voltage Directive)
    3 Output voltage within 21.6 V to 26.4 V DC (Ripple P-P: 10 % or less.)
    Unit power:Momentary power failure period10ms or less
    (Note) The power supply connected to this product must satisfy the following conditions
    1 SELV (Safety Extra Low Voltage): Reinforced insulated from hazardous potential part (48 V or more)
    2 Compliance with the LVD (Low Voltage Directive)
    3 Output voltage within 21.6 V to 26.4 V DC (Ripple P-P: 10 % or less.)
    Input specifications:No. of input pointsInput of light curtain: 2 points (with interference prevention function)
    Input of terminal block: 6 points (input terminals: 12 points)
    (Note) Total number of input points is 8 points, and use 2 points for control output (OSSD 1, 2) of 2 light cutains. Two inputs terminals are assigned for each input since dual wiring is supported.
    Input specifications:Insulation methodPhotocoupler
    Input specifications:Rated input voltage24 V DC
    Input specifications:Rated input current4.6 mA approx.
    Input specifications:Operating voltage range24 V DC plus or minus 10 % Ripple P-P 10 % or less
    Input specifications:Max. simultaneous input points100%
    Input specifications:ON voltage / ON current15 V DC or more / 2 mA or more
    Input specifications:OFF voltage / OFF current5 V DC or less / 0.5 mA or less
    Input specifications:Input resistance5.6 kOhm approx.
    Input specifications:Input typeNegative common
    Input specifications:Response timeOFF to ON: 0.4 ms or less (at 24 V DC, excluding connecting device)
    ON to OFF: 0.4 ms or less (at 24 V DC, excluding connecting device)
    Input specifications:Safety remote station input response time32 ms or less + filter-out time (1 ms, 5 ms, 10 ms, 20 ms, 50 ms)
    dummy4 points (source + sink type)
    2 points (source + source type)
    dummyPhotocoupler
    dummy24 V DC
    dummy24 V DC plus or minus 10 % Ripple P-P 10 % or less
    dummy0.5 A / point
    dummy1.0 A (10 ms or less)
    dummy0.5 mA or less
    dummy1.0 V DC or less
    dummyOutput short-circuit protection function
    dummySource + sink type, Source + source type
    dummyOFF to ON: 0.4 ms or less (at 24 V DC)
    ON to OFF: 0.4 ms or less (at 24 V DC)
    dummy32 ms or less
    dummyIncorporated (Zener diode)
    dummy24 V DC plus or minus 10 % Ripple P-P 10 % or less
    (Note) The power supply connected to this product must satisfy the following conditions
    1 SELV (Safety Extra Low Voltage): Reinforced insulated from hazardous potential part (48 V or more)
    2 Compliance with the LVD (Low Voltage Directive)
    3 Output voltage within 21.6 V to 26.4 V DC (Ripple P-P: 10 % or less.)
    dummy60 mA (24 V DC, with all points ON, excluding external load current)
    (Note) The power supply connected to this product must satisfy the following conditions
    1 SELV (Safety Extra Low Voltage): Reinforced insulated from hazardous potential part (48 V or more)
    2 Compliance with the LVD (Low Voltage Directive)
    3 Output voltage within 21.6 V to 26.4 V DC (Ripple P-P: 10 % or less.)
    dummyExternal power supply overvoltage / overcurrent protection function
    (Note) The power supply connected to this product must satisfy the following conditions
    1 SELV (Safety Extra Low Voltage): Reinforced insulated from hazardous potential part (48 V or more)
    2 Compliance with the LVD (Low Voltage Directive)
    3 Output voltage within 21.6 V to 26.4 V DC (Ripple P-P: 10 % or less.)
    dummy8 A (Not replaceable)
    (Note) The power supply connected to this product must satisfy the following conditions
    1 SELV (Safety Extra Low Voltage): Reinforced insulated from hazardous potential part (48 V or more)
    2 Compliance with the LVD (Low Voltage Directive)
    3 Output voltage within 21.6 V to 26.4 V DC (Ripple P-P: 10 % or less.)
    dummy16 input points / common, 4 output points / common (Terminal block 2-wire type)
    dummyMax. 4 A (Total of inputs and outputs)
    dummy1 station
    dummy10 12 times
    dummy38 ms
    Environmental resistance:Ambient temperature0 to +55 degrees +32 to +131 degrees Fahrenheit (No dew condensation), Storage: -40 to +75 degrees -40 to +167 degrees Fahrenheit
    Environmental resistance:Ambient humidity5 to 95 % RH, Storage: 5 to 95 % RH
    Environmental resistance:Voltage withstandability500V AC between all external DC terminals and ground, for 1 minute
    Environmental resistance:Insulation resistance10 MOhm or more between all external DC terminals and ground, by a 500 V DC insulation resistance tester
    Environmental resistance:Vibration resistanceConforming to JIS B 3502, IEC 61131-2
    Environmental resistance:Shock resistanceConforming to JIS B 3502, IEC 61131-2
    Overvoltage categoryII
    Pollution degree2
    Wiring cable0.3 to 2.0 mm2
    dummyRAV1.25-3 (Conforming to JIS B 2805) (Applicalbe wire size: 0.3 to 1.25 mm2)
    WeightNet weight: 0.7 kg approx.

    MENU

    Recently checked products

    Recently checked product numbers