{lead}
{name}
  • {name}
  • 日本語
  • English (Global)
  • English (Asia Pacific)
  • 简体中文
  • 繁體中文
  • 한국어
▼
Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

RX2-D300｜Robust Photoelectric Sensor RX(Discontinued)

Download

Discontinued

Last time buy (JST)

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Product Number

    RX2-D300

    Part Number

    RX2-D300

    Product

    Robust Photoelectric Sensor

    Details

    DC 2-wire type Diffuse reflective

    Product Name

    		 Robust Photoelectric Sensor RX(Discontinued)
    Substitute
    Sub Prod No.
    Sub Part No.
    Remark

    Spec Detail

    ItemSpecifications
    Part NumberRX2-D300
    Product NumberRX2-D300
    Products NameRobust Photoelectric Sensor
    Product detailsDC 2-wire type Diffuse reflective
    The price of the productPlease contact our office
    Applicable regulationsEMC Directive, RoHS Directive
    Sensing range300 mm 11.811 in
    (Note) The sensing range and the hysteresis of the specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
    Sensing objectOpaque, translucent or transparent object
    (Note) Make sure to confirm detection with an actual sensor before use.
    Hysteresis15 % or less of operation distance
    (Note) The sensing range and the hysteresis of the specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
    Repeatability(perpendicular to sensing axis)0.5 mm 0.020 in or less
    Supply voltage12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
    Current consumption1 mA or less
    (Note) It is the leakage current when the output is in the OFF state.
    Sensing outputNon contact DC 2-wire type
    - Load current: 5 to 100 mA
    - Residual voltage: 4 V or less (Note)
    (Note) When extending the cable, the residual voltage will be increased depending on the type of cable used. Verify the residual voltage when extending the cable.
    Sensing output:Output operationSwitchable either Light-ON or Dark-ON
    Sensing output:Short-circuit protectionIncorporated
    Response time3 ms or less
    Operation indicatorRed LED (lights up when the output is ON)
    Stability indicatorGreen LED (Light-ON mode: lights up under stable light received condition, Dark-ON mode: lights up under stable dark condition)
    Emitting indicator-
    Sensitivity adjusterContinuously variable adjuster
    ProtectionIP67 (IEC)
    Ambient temperature-20 to +60 degrees -4 to +140 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
    Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
    Ambient illuminanceIncandescent light: 3,500 Lx or less at the light-receiving face
    Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
    Insulation resistance20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
    Vibration resistance10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
    Shock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
    Emitting elementInfrared LED (modulated)
    Emitting element:Peak emission wavelength890 nm 0.035 mil
    MaterialEnclosure: Die-cast zinc alloy
    Indicator cover: Polyethersulphone
    Lens: Polycarbonate
    Cable0.15 mm2 2-core oil, heat and cold resistant cabtyre cable, 2 m 6.562 ft long
    Cable extension-
    (Note) When extending the cable, the residual voltage will be increased depending on the type of cable used. Verify the residual voltage when extending the cable.
    Weight70 g approx.
    AccessoryMS-RX-1 (Sensor mounting bracket): 1 set
    Adjusting screwdriver: 1 pc

    MENU

    Recently checked products

    Recently checked product numbers