{lead}
{name}
  • {name}
  • 日本語
  • English (Global)
  • English (Asia Pacific)
  • 简体中文
  • 繁體中文
  • 한국어
▼
Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

RX-M50｜Robust Photoelectric Sensor RX(Discontinued)

Download

Discontinued

Last time buy (JST)

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Product Number

    RX-M50

    Part Number

    RX-M50

    Product

    Robust Photoelectric Sensor

    Details

    Standard type Thru-beam [Infrared(Long sensing range)]

    Product Name

    		 Robust Photoelectric Sensor RX(Discontinued)
    Substitute
    Sub Prod No.
    Sub Part No.
    Remark

    Spec Detail

    ItemSpecifications
    Part NumberRX-M50
    Product NumberRX-M50
    Products NameRobust Photoelectric Sensor
    Product detailsStandard type Thru-beam [Infrared(Long sensing range)]
    The price of the productPlease contact our office
    Applicable regulationsEMC Directive, RoHS Directive
    Sensing range50 m 164.042 ft
    Sensing objectdia. 10 mm dia. 0.394 in or more opaque object
    Hysteresis-
    Repeatability(perpendicular to sensing axis)0.5 mm 0.020 in or less
    Supply voltage12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
    Current consumptionEmitter: 25 mA or less
    Receiver: 25 mA or less
    Sensing outputNPN open-collector transistor
    - Maximum sink current: 100 mA
    - Applied voltage: 30 V DC or less (between sensing output and 0 V)
    - Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
    Sensing output:Utilization categoryDC-12 or DC-13
    Sensing output:Output operationSwitchable either Light-ON or Dark-ON
    Sensing output:Short-circuit protectionIncorporated
    Self-diagnosis outputNPN open-collector transistor
    - Maximum sink current: 50 mA
    - Applied voltage: 30 V DC or less (between self-diagnosis output and 0 V)
    - Residual voltage: 1.5 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current)
    Self-diagnosis output:Output operationON under unstable sensing condition
    Self-diagnosis output:Short-circuit protection-
    Response time1 ms or less
    Test input (emission halt) functionIncorporated
    Operation indicatorRed LED (lights up when the sensing output is ON)
    Stability indicatorGreen LED (lights up under stable light received condition or stable dark condition)
    Emitting indicatorRed LED (lights up during beam emission)
    Sensitivity adjusterContinuously variable adjuster
    Automatic Interference prevention function-
    ProtectionIP67 (IEC)
    Ambient temperature-25 to +60 degrees -13 to +140 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
    Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
    Ambient illuminanceIncandescent light: 3,500 Lx or less at the light-receiving face
    Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
    Insulation resistance20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
    Vibration resistance10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
    Shock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
    Emitting element (modulated)Infrared LED
    Emitting element (modulated):Peak emission wavelength880 nm 0.035 mil
    MaterialEnclosure: Die-cast zinc alloy
    Indicator cover: Polyethersulphone
    Lens: Polycarbonate
    CableEmitter: 0.15 mm2 3-core oil, heat and cold resistant cabtyre cable, 2 m 6.562 ft long
    Receiver: 0.15 mm2 4-core oil, heat and cold resistant cabtyre cable, 2 m 6.562 ft long
    Cable extensionExtension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver).
    WeightEmitter: 75 g approx
    Receiver: 75 g approx
    AccessoryMS-RX-1 (Sensor mounting bracket): 1 set for emitter and receiver
    Adjusting screwdriver: 1 pc

    MENU

    Recently checked products

    Recently checked product numbers