Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

HG-C1400｜CMOS type Micro Laser Distance Sensor HG-C

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

HG-C1400

Part Number

HG-C1400

Product

CMOS type Micro Laser Distance Sensor

Details

Measurement center 400mm 15.748 in type

Product Name

 CMOS type Micro Laser Distance Sensor HG-C

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberHG-C1400
Product NumberHG-C1400
Products NameCMOS type Micro Laser Distance Sensor
Product detailsMeasurement center 400mm 15.748 in type
Applicable regulations and certificationsCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), FDA Regulations, UL/c-UL Certification
(Note) : The UL/c-UL certified products have been shipped since April, 2017.
Measurement center distance400 mm 15.748 in
Measuring range±200 mm 7.874 in
Repeatability300 μm 11.811 mil (Measuring distance 200 to 400 mm 7.874 to 15.748 in)
800 μm 31.496 mil (Measuring distance 400 to 600 mm 15.748 to 23.622 in)
Linearity±0.2 % F.S. (Measuring distance 200 to 400 mm 7.874 to 15.748 in)
±0.3 % F.S. (Measuring distance 400 to 600 mm 15.748 to 23.622 in)
Temprerature characteristics0.03% F.S./℃
Light sourceRed semiconductor laser Class 2 [IEC / EN/ JIS / GB / KS / FDA (Note) ]
Max. output: 1 mW
emission peak wavelength: 655 nm 0.026 mil
(Note) This product complies with the FDA regulations (FDA 21 CFR 1040.10 and 1040.11) in accordance with FDA Laser Notice No. 56, except for complying with IEC 60825-1 Ed. 3.
Beam diameterø500 μm 19.6851 mil approx.
(Note) This is the size in the measurement center distance. These values were defined by using 1/e2 (13.5% approx.) of the center light intensity. Due to leak light outside the specified area, the reflectance around the detecting point may be higher than at the point and this may affect the measurement value.
Supply voltage12 to 24 V DC ±10 %, Ripple P-P 10 % or less
Current consumption40 mA or less (at 24V DC supply voltage)
65 mA or less (at 12V DC supply voltage)
Note : Specifications have been changed from shipment in August, 2016. For shipment before July 2016 ： 40 mA or less (at 24 V DC supply voltage), 60 mA or less (at 12 V DC supply voltage)
Control outputNPN open-collector transistor
- Maximum sink current: 50 mA
- Applied voltage: 30 V DC or less (Between control output to 0V)
- Residual voltage: 1.5 V or less (At 50 mA sink current)
- Leakage current: 0.1 mA or less
Control output:Output operationEither Light-ON or Dark-ON
Control output:Short-circuit protectionIncorporated (Auto reset type)
Analogue output : Analog voltage output• Output range: 0 to 5 V (at alarm: +5.2 V)
• Output impedance: 100Ω
Analogue output : Analog current output• Output range: 4 to 20mA (at alarm: 0mA)
• Output impedance: 300Ω or less
Note : Analog current output has been added from shipment in August 2016.
Response timeSwitchable between 1.5 ms / 5 ms / 10 ms
External inputNPN non-contact input
- Input conditions
Invalid: +8 to +V DC or Open
Valid: 0 to +1.2 V DC
- Input impedance: 10 kΩ approx.
Pollution degree2
Operating altitude2,000 m 6561.680 ft or less
ProtectionIP67 (IEC)
Ambient temperature-10 to +45 ℃ -14 to 113 ℉ (No dew condensation or icing allowed), Storage: -20 to +60 ℃ -4 to 140 ℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminanceIncandescent light: 3,000 ℓx or less at the light-receiving face
Vibration resistance10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
Shock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Cable5-core composite cable, 2 m 6.5617 ft long
Cable extensionExtension up to total 10 m 393.701 ft is possible with 0.3 mm2, or more, cable.
MaterialEnclosure: Aluminum die-cast
Front cover: Acrylic
WeightNet weight: 35 g approx. (without cable), 85 g approx. (including cable)

MENU

Recently checked products

Recently checked product numbers