Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

HG-C1030L3-P-J｜CMOS type Micro Laser Distance Sensor HG-C1000L

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

HG-C1030L3-P-J

Part Number

HG-C1030L3-P-J

Product

CMOS Type Micro Laser Distance Sensor

Details

M12 connector type

Product Name

 CMOS type Micro Laser Distance Sensor HG-C1000L

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberHG-C1030L3-P-J
Product NumberHG-C1030L3-P-J
Products NameCMOS Type Micro Laser Distance Sensor
Product detailsM12 connector type
Applicable regulations and certificationsCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), FDA Regulations, UL/c-UL Certification
Measurement center distance30 mm 1.181 in
Measuring range±5 mm 0.197 in
Repeatability10 μm 0.394 mil
Linearity±0.1 % F.S.
Temprerature characteristics0.03%F.S./℃
Light sourceRed semiconductor laser Class 2 [IEC / EN/ JIS / GB / KS / FDA (Note)] Max. output: 1 mW, emission peak wavelength: 655 nm 0.026 mil
(Note:)This product complies with the FDA regulations (FDA 21 CFR 1040.10 and 1040.11) in accordance with FDA Laser Notice No. 56, except for complying with IEC 60825-1 Ed. 3.
Beam diameterø50 μm 1.969 mil approx
Supply voltage24 V DC ±10 % Ripple P-P 10 %
Current consumption40 mA or less (at 24 V DC supply voltage)
Communication output (C/Q) : IO-Link communicationIO-Link Specification V1.1
Communication output (C/Q) : Baud rateCOM3 (230.4 kbps)
Communication output (C/Q) : Process data4 byte
Communication output (C/Q) : Minimum cycle time1.0 ms
Control outputPNP open-collector transistor
• Maximum source current: 50 mA
• Applied voltage: 30 V DC or less (Between control output to +V)
• Residual voltage: 1.5 V or less (at 50 mA source current)
• Leakage current: 0.1 mA or less
Control output:Output operationSwitchable between either Light-ON or Dark-ON
Control output:Short-circuit protectionIncorporated (auto reset type)
Response timeSwitchable between 1.5 ms / 5 ms / 10 ms
Pollution degree2
Operating altitude2,000 m 6561.680 ft or less
ProtectionIP67(IEC)
Ambient temperature-10 to +45℃ -14 to 113℉ (No dew condensation or icing allowed), Storage: -20 to +60℃ -4 to 140℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminanceIncandescent light: 3,000 ℓx or less at the light-receiving face
Vibration resistance10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
Shock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
CableDiscrete wire type: 0.2 mm2 4-core PVC cable, 2 m 6.562 ft long
M12 connector type: 0.2 mm2 4-core PVC cable with connector, 0.3 m 0.984 ft long
Cable extensionExtension up to total 20 m 65.617 ft is possible with 0.3 mm2, or more, cable.
MaterialEnclosure: Aluminum die-cast, Front cover: Acrylic
Weight30 g approx. (without cable), 50 g approx. (including cable)
Remark(Note):Supply voltage: 24 V DC, ambient temperature: +20℃ +68℉, response time: 10 ms, and analog output value of measurement center distance are used for unspecified measurement conditions. The subject is white ceramics.

MENU

Recently checked products

Recently checked product numbers