Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

HD-T1C｜LED Type Wafer Alignment Sensor Controller HD-T1

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

HD-T1C

Part Number

HD-T1C

Product

LED Type Wafer Alignment Sensor Controller

Details

Controller

Product Name

 LED Type Wafer Alignment Sensor Controller HD-T1

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberHD-T1C
Product NumberHD-T1C
Products NameLED Type Wafer Alignment Sensor Controller
Product detailsController
Pollution degree3 (Industrial environment)
Ambient temperature0 to +40 ℃ +32 to +104℉ (No dew condensation), Storage: -20 to +70 ℃ -4 to +158℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock resistance490 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
MaterialEnclosure: Heat-resistant ABS, Connector cover: Heat-resistant ABS, Adjuster cover: Polycarbonate
Cable0.22 mm2 3-core heat-resistant PVC cable, 0.3 m 0.984 ft long
WeightNet weight: 85 g approx.
Applicable sensor headHD-T1030
Supply voltage24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption70 mA or less (Including sensor head)
Analog outputAnalog voltage
- Output voltage: 1 ± 0.5 V (all light interrupted) to 5 ± 0.5 V (all light received)
- Output impedance: 75 Ω
Analog output:Response time0.5 ms or less (8 V/ms or more)
Analog output:Resolution30 μm 1.181 mil
(Note):Resolution refers to the peak to peak distance conversion value of analog output (in the frequency band below 20 MHz).
Analog output:Linearity±1.0 % F.S. (at 28 mm 1.102 in sensing width of the sensing center)
(Note):This is the representative example of measurement with a combination of sensor head and controller.
Analog output:Temperature characteristics±0.1 % F.S./℃ (at 24 ± 2 ℃ 75.2 ± 35.6℉)
(Note):This is the representative example of measurement with a combination of sensor head and controller.
Span adjustment functionSpan of the analog output voltage is adjusted. 15-turn endless adjuster
Shift adjustment functionOffset of the analog output voltage is adjusted. 15-turn endless adjuster
Warming-up period30 min. or more
Cable extensionExtension up to total 3 m 9.843 ft is possible with 0.3 mm2, or more, heat-resistant PVC cable.

MENU

Recently checked products

Recently checked product numbers