Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

EX-FC1｜Leak Detection Sensor EX-F70/EX-F60

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

EX-FC1

Part Number

EX-FC1

Product

Simple wire-saving unit

Product Name

 Leak Detection Sensor EX-F70/EX-F60

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberEX-FC1
Product NumberEX-FC1
Products NameSimple wire-saving unit
Applicable regulations and certificationsCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL Recognition
Applicable connectorSL-CP1
Supply voltage12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption50 mA or less (for the unit itself), 135 mA or less (including the sensor input current when all outputs of sensors are ON)
OutputRelay contact 1a
- Switching capacity: 30 V 1 A DC (resistive load)
- Min. applied load: 10 mV 10 μA DC
- Electrical lifetime: 100,000 switching operations or more (rated load, switching frequency 20 operations/min.)
- Mechanical lifetime: 50 million switching operations or more (switching frequency 180 operations/min.)
Output:Output operationThe output relay is ON when the input signal from the sensor is ON
Note : Even with only one leak detection sensor connected, an OFF signal is output if the sensor detects liquid leakage, or if the unit has been installed incorrectly.
Response time5 ms or less (excluding the response time of the sensor)
Input No.8 Nos. [PNP output type sensors (leak detection sensors, general sensors) cannot be connected.]
Indicators : NormalGreen LED x 8 (light up when the sensor is connected to each channel and the connection setting switch is set to ON)
Indicators : ErrorRed LED x 8 (light up when the leak liquid is detected by a sensor connected to each channel or a sensor is mounted improperly)
Indicators : OutputOrange LED (lights up when the output relay is ON (normal))
Ambient temperature-10 to +60 ℃ +14 to +140 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ - 4 to +158 ℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
MaterialEnclosure: ABS, Unit mounting base: POM, Terminal part: PBT
Cable0.2 mm2 4-core cabtyre cable, 2 m 6.562 ft long
Cable extensionExtension up to total less than 10 m 32.808 ft is possible, with 0.3 mm2, or more, cable.
WeightNet weight: 85 g approx.
AccessorySL-CP1 (Snap male connector): 8 pcs., MS-SL-2 (Unit mounting base): 1 pc.

MENU

Recently checked products

Recently checked product numbers