Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

CX-482｜Compact Photoelectric Sensor CX-400 Ver.2

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

CX-482

Part Number

CX-482

Product

Compact Photoelectric Sensor

Details

Retroreflective(For transparent object sensing)

Product Name

 Compact Photoelectric Sensor CX-400 Ver.2

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberCX-482
Product NumberCX-482
Products NameCompact Photoelectric Sensor
Product detailsRetroreflective(For transparent object sensing)
The price of the productPlease contact our office
Applicable regulations and certificationsCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Sensing range0.1 to 2 m 0.328 to 6.562 ft
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
Sensing objectØ50 mm Ø1.969 in or more transparent,translucent or opaque object
(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.
(Note) Make sure to confirm detection with an actual sensor before use.
Hysteresis-
Repeatability(perpendicular to sensing axis)0.5 mm 0.020 in or less
Supply voltage12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption10 mA or less
OutputNPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Output:Output operationSwitchable either Light-ON or Dark-ON
Output:Short-circuit protectionIncorporated
Response time1 ms or less
Operation indicatorOrange LED(lights up when the output is ON)
(incorporated on the receiver for thru-beam type)
Stability indicatorGreen LED(lights up under stable light received condition or stable dark condition)
(incorporated on the receiver for thru-beam type)
Power indicator-
Sensitivity adjusterContinuously variable adjuster(incorporated on the receiver for thru-beam type)
Automatic interference prevention functionIncorporated(Two units of sensors can be mounted close together.)
ProtectionIP67 (IEC)
Ambient temperature- 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminanceIncandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element (modulated)Infrared LED
Emitting element (modulated):Peak emission wavelength870 nm 0.034 mil
MaterialEnclosure: PBT (polybutylene terephthalate)
Lens: polycarbonate
Indicator cover: polycarbonate
Cable0.2 mm23-core cabtyre cable, 2 m 6.562 ft long
Cable extensionExtension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
WeightNet weight: 50 g approx.
Gross weight: 80 g approx.
AccessoryRF-230 (Reflector): 1 pc.

MENU

Recently checked products

Recently checked product numbers