Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

CX-411-P-Z｜Compact Photoelectric Sensor CX-400 Ver.2

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

CX-411-P-Z

Part Number

CX-411-P-Z

Product

Compact Photoelectric Sensor

Details

Thru-beam

Product Name

 Compact Photoelectric Sensor CX-400 Ver.2

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberCX-411-P-Z
Product NumberCX-411-P-Z
Products NameCompact Photoelectric Sensor
Product detailsThru-beam
The price of the productPlease contact our office
Applicable regulations and certificationsCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL Recognition Certification
Sensing range10 m 32.808 ft
Sensing objectØ12 mm Ø0.472 in or more opaque object
(Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in (using round slit mask) can be detected.
Hysteresis-
Repeatability(perpendicular to sensing axis)0.5 mm 0.020 in or less
Supply voltage12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumptionEmitter: 15 mA or less
Receiver: 10 mA or less
OutputPNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current)
Output:Output operationSwitchable either Light-ON or Dark-ON
Output:Short-circuit protectionIncorporated
Response time1 ms or less
Operation indicatorOrange LED(lights up when the output is ON)
(incorporated on the receiver for thru-beam type)
Stability indicatorGreen LED(lights up under stable light received condition or stable dark condition)
(incorporated on the receiver for thru-beam type)
Power indicatorGreen LED(lights up when the power is ON)
(incorporated on the emitter)
Sensitivity adjusterContinuously variable adjuster(incorporated on the receiver for thru-beam type)
Automatic interference prevention functionTwo units of sensors can be mounted close together with interference prevention filters. (Sensing range: 5 m 16.404 ft)
ProtectionIP67 (IEC)
Ambient temperature- 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminanceIncandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element (modulated)Red LED
Emitting element (modulated):Peak emission wavelength680 nm 0.027 mil
MaterialEnclosure: PBT (polybutylene terephthalate)
Lens: acrylic
Indicator cover: acrylic
Accessory-

MENU

Recently checked products

Recently checked product numbers