Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

Ultra-slim Photoelectric Sensor EX-10 Ver.2

Download

  • Basic Information

  • Applications

  • Order guide

  • Option

  • Specifications

  • Dimensions

  • Circuit/ Wiring

  • Sensing characteristics

  • Cautions For Use

------------------------------ Tab1 showing ------------------------------

Basic Information

Amplifier built-in extraordinarily small and slim size

UL,CE,UKCA Approved

CE : Excluding EX-15□/17□
UKCA : Excluding EX-15□/17□
UL : Recognition(Excluding some models)

*Please check ."Order guide" for the compliant model no.

*Be sure to read the "Cautions For Use" when using for the above applications.

*Before using this device, be sure to confirm the standards / regulations applied in the relevant nation and region.

*If you need the Certificate or Confirmation Letter, please contact us.open link in new window

Features

Sensor unit complies with ISO 13849-1*1 Category 1 PLc*2 

A Category 3 PLd Safety System can be built by using Category 4 PLe compliant controllers together with our sensors
*1 Safety-related parts of control systems, Part 1: General principles for design
*2 Conformed from December 2021 production.

■ Category 3, PLd construction example

Category 3, PLd construction example

[Precautions when using as Category 3 PLd]
Sensor redundancy is required!
Observe the following when connecting to the safety controller.
・In the case the product is used in a standalone state, the safety system may not operate properly when a sensor malfunction occurs.

 CAUTION  
The product cannot be used for human body detection.

■ Application examples

[Required conditions]

1.The source of hazards is located inside the machine and may cause hazards to nearby people.

2.The equipment is classified as Category 3 PLd or lower.

3.The source of hazards is isolated only by the automatic door.

* The product can be used safely when all of the above conditions 1 through 3 are satisfied!

* There are cases where you can use it under other conditions.

Application examples

*Be sure to read the "Cautions For Use" when using for safety applications.

Smallest body, just 3.5 mm 0.138 in thick

It can be mounted in a very small space as its size is just
W10 x H14.5 x D3.5 mm
W0.394 x H0.571 x D0.138 in (thru-beam, front sensing type).

Smallest body, just 3.5 mm 0.138 in thick

Flexible mounting

The diffuse reflective type sensor is front sensing and is so thin that it gives an impression of being just pasted on the mounting base. The thru-beam type is available as front sensing type, as well as, side sensing type, allowing flexible mounting.

pic07

A wide variety of narrow-beam type! Light diffusion is approx. 1/2 of standard type. [EX-□S□]

Less interference with no slit, narrow-pitch can be set.

The pitch of installation is 1/2 of conventional models, so that the close-installation is possible. No cost is necessary to purchase or install a slit.

Less interference with no slit, narrow-pitch can be set.

Possible to sense a minute object less than ø0.5 mm ø0.039 in with no slit.

The series is applicable to sense a minute object without any cost.

Possible to sense a minute object less than ø0.5 mm ø0.039 in with no slit.

Long sensing range of 1 m 3.281 ft with narrow beam

A long 1 m 3.281 ft sensing range is possible with narrow beam.

Long sensing range of 1 m 3.281 ft with narrow beam

Electric power saving

The EX-10 series achieves reductions in power consumption of up to 65 %. These sensors contribute to environmental friendliness.

High-speed response time: 0.5 ms

The sensor is suitable for detecting small and high-speed traveling objects.

pic09

Minimum sensing object: ø1 mm ø0.039 in [EX-11(E)□, EX-15(E)□]

EX-11□, EX-11E□, EX-15 and EX-15E are incorporated with ø1 mm ø0.039 in slit masks so that ø1 mm ø0.039 in, or more, object can be detected. Hence, they are suitable for precise positioning or small parts detection.

pic16

Long sensing range: 1 m 3.281 ft [EX-19(E)□]

A sensing range of 1 m 3.281 ft has been realized with a slim size of just 3.5 mm 0.138 in. It can be used to detect even wide IC trays.

pic19

Background suppression [EX-14□]

Hardly affected by background

Even a specular background separated by 100 mm 3.937 in, or more, is not detected. (However, the background should be directly opposite. A spherical or curved background may be detected.)

pic17

Black object reliably detected

It can reliably detect dark color objects since it is convergent reflective type.

pic18

Incorporated an inverter countermeasure circuit

The EX-10 series become significantly stronger against inverter light and other extraneous light.

pic11

Waterproof IP67

The sensors features an IP67 rating to allow their use in process lines where water is used or splashed.
Rust-resistant stainless steel sensor mounting brackets are available.
Note: If water splashes on the sensor during sensing operation, it may sense water as an object.

Bending durability [EX-□-R]

Bending-resistant cable type EX-□-R is available. It is most suitable for moving parts, such as robot arm, etc.

Mountable with M3 screws

Non-corrosive stainless steel type sensor mounting bracket is also available.
Note: Sensor mounting brackets can not be used for the narrow beam type (EX-□S□).

MS-EX10-1 [Cold rolled carbon steel (SPCC)]
MS-EX10-11 [Stainless steel (SUS304)]
(mounting bracket for the front sensing type)

pic13

MS-EX10-2 [Cold rolled carbon steel (SPCC)]
MS-EX10-12 [Stainless steel (SUS304)]
(mounting bracket for the side sensing type)

pic14

MS-EX10-3 [Cold rolled carbon steel (SPCC)]
MS-EX10-13 [Stainless steel (SUS304)]
(L-shaped mounting bracket)

pic15

Red beam makes beam alignment easy

The red LED beam projected from the emitter helps you to align the sensor heads.

Less resources used

Based on environmental considerations, simplified packaging is used in order to reduce waste.
In addition, the bag is made from polyethylene which produces no toxic gases even when burned.

------------------------------ Tab2 showing ------------------------------

Applications

Positioning of PCBs
Positioning of PCBs
Detecting ICs
Detecting ICs
Detecting PCB rack
Detecting PCB rack
Detecting wafer cassette
Detecting wafer cassette
Detecting thin ring
Detecting thin ring
Checking for absence of capacitor in tray
Checking for absence of capacitor in tray

------------------------------ Tab3 showing ------------------------------

Order guide

TypeAppearanceSensing
range		Model No.
(Note 2)		Output
operation		Output
NPN outputPNP output
Standard
type		Thru-beamFront sensing 

150 mm
5.906 in		EX-11AEX-11A-PNLight-ONNPN opencollector transistor
or
PNP opencollector transistor
EX-11BEX-11B-PNDark-ON
500mm
19.685 in		EX-13AEX-13A-PNLight-ON
EX-13BEX-13B-PNDark-ON
1m
3.281 ft		EX-19AEX-19A-PNLight-ON
EX-19BEX-19B-PNDark-ON
With operation mode switch on the bifurcation150 mm
5.906 in		EX-15-Switchable either
Light-ON or
Dark-ON
500mm
19.685 in		EX-17-
Side sensing 

150 mm
5.906 in		EX-11EAEX-11EA-PNLight-ON
EX-11EBEX-11EB-PNDark-ON
500mm
19.685 in		EX-13EAEX-13EA-PNLight-ON
EX-13EBEX-13EB-PNDark-ON
1m
3.281 ft		EX-19EAEX-19EA-PNLight-ON
EX-19EBEX-19EB-PNDark-ON
With operation mode switch on the bifurcation150 mm
5.906 in		EX-15E-Switchable either
Light-ON or
Dark-ON
500mm
19.685 in		EX-17E-
Convergent reflective
(Diffused beam type)		Front sensing

2 to 25 mm
0.079 to 0.984 in
(Note 1)
(Convergent point: 10 mm 0.394 in)		EX-14AEX-14A-PNLight-ON
EX-14BEX-14B-PNDark-ON
PNPNarrow beam
type		Thru-beamFront sensing

150 mm
5.906 in		EX-11SAEX-11SA-PNLight-ONNPN opencollector transistor
or
PNP opencollector transistor
EX-11SBEX-11SB-PNDark-ON
500mm
19.685 in		EX-13SAEX-13SA-PNLight-ON
EX-13SBEX-13SB-PNDark-ON
1m
3.281 ft		EX-19SAEX-19SA-PNLight-ON
EX-19SBEX-19SB-PNDark-ON
Side sensing

150 mm
5.906 in		EX-11SEAEX-11SEA-PNLight-ON
EX-11SEBEX-11SEB-PNDark-ON
500mm
19.685 in		EX-13SEAEX-13SEA-PNLight-ON
EX-13SEBEX-13SEB-PNDark-ON

NOTE ： Mounting bracket is not supplied with the sensor. Please select from the range of optional sensor mounting brackets (MS-EX10-□). Sensor mounting brackets (MS-EX10-□) can not be used for the narrow beam type (EX-□S□).

Note 1 : The sensor does not detect even a specular background if it is separated by 100 mm 3.937 in or more. (However, the background should be directly opposite. A spherical or curved background may be detected.)
Note 2 : The model No. with "P" shown on the label affixed to the thru-beam type sensor is the emitter, "D" shown on the label is the receiver.

Bending-resistant cable type

Bending-resistant cable type is also available for NPN output type. (excluding narrow beam type EX-□S□ and sensor with operation mode switch on the bifurcation EX-15□/17□)
When ordering this type, suffix "-R" to the model No.
(e.g.) Bending-resistant cable type of EX-11A is "EX-11A-R".

Standard typeBending-resistant cable type
EX-11AEX-11A-R
EX-11BEX-11B-R
EX-13AEX-13A-R
EX-13BEX-13B-R
EX-19AEX-19A-R
EX-19BEX-19B-R
EX-11EAEX-11EA-R
EX-11EBEX-11EB-R
EX-13EAEX-13EA-R
EX-13EBEX-13EB-R
EX-19EAEX-19EA-R
EX-19EBEX-19EB-R
EX-14AEX-14A-R
EX-14BEX-14B-R

5 m 16.404 ft cable length type

5 m 16.404 ft cable length type (standard: 2 m 6.562 ft) is also available for NPN output type. (excluding narrow beam type EX-□S□ and bending-resistant cable type)
When ordering this type, suffix "-C5" to the model No.
(e.g.) 5 m 16.404 ft cable length type of EX-11A is "EX-11A-C5".

Standard type5 m 16.404 ft cable length type
EX-11AEX-11A-C5
EX-11BEX-11B-C5
EX-13AEX-13A-C5
EX-13BEX-13B-C5
EX-19AEX-19A-C5
EX-19BEX-19B-C5
EX-15EX-15-C5
EX-17EX-17-C5
EX-11EAEX-11EA-C5
EX-11EBEX-11EB-C5
EX-13EAEX-13EA-C5
EX-13EBEX-13EB-C5
EX-19EAEX-19EA-C5
EX-19EBEX-19EB-C5
EX-15EEX-15E-C5
EX-17EEX-17E-C5
EX-14AEX-14A-C5
EX-14BEX-14B-C5

ISO 13849 -1 Category 1, PLc compliant model no. list

TypeNPN outputPNP output
Standard5 m 16.404 ft cable lengthBending-resistant cableStandard
Thru-beamEX-11AEX-11A-C5EX-11A-REX-11A-PN
EX-11BEX-11B-C5EX-11B-REX-11B-PN
EX-11EAEX-11EA-C5EX-11EA-REX-11EA-PN
EX-11EBEX-11EB-C5EX-11EB-REX-11EB-PN
EX-13AEX-13A-C5EX-13A-REX-13A-PN
EX-13BEX-13B-C5EX-13B-REX-13B-PN
EX-13EAEX-13EA-C5EX-13EA-REX-13EA-PN
EX-13EBEX-13EB-C5EX-13EB-REX-13EB-PN
EX-19AEX-19A-C5EX-19A-REX-19A-PN
EX-19BEX-19B-C5EX-19B-REX-19B-PN
EX-19EAEX-19EA-C5EX-19EA-REX-19EA-PN
EX-19EBEX-19EB-C5EX-19EB-REX-19EB-PN
Convergent reflectiveEX-14AEX-14A-C5EX-14A-REX-14A-PN
EX-14BEX-14B-C5EX-14B-REX-14B-PN

Notes :
1) :Conformed from December 2021 production. When ordering a product that complies with safety standards, please order Lot No. "1L1" (First 3 digits) or later.
2) :EX-15/17 does not conform.

------------------------------ Tab4 showing ------------------------------

Option

NOTE: Sensor mounting brackets can not be used for the narrow beam type (EX-□S□).

DesignationModel No.Description
Sensor mounting bracket
(Note 1)		MS-EX10-1Mounting bracket for the front sensing type sensor [Cold rolled carbon steel (SPCC)]
(The thru-beam type sensor needs two brackets.)
MS-EX10-2Mounting bracket for the side sensing type sensor [Cold rolled carbon steel (SPCC)]
(The thru-beam type sensor needs two brackets.)
MS-EX10-3L-shaped mounting bracket sensor [Cold rolled carbon steel (SPCC)]
(The thru-beam type sensor needs two brackets.)
MS-EX10-11Mounting bracket for the front sensing type sensor [Stainless steel (SUS304)]
(The thru-beam type sensor needs two brackets.)
MS-EX10-12Mounting bracket for the side sensing type sensor [Stainless steel (SUS304)]
(The thru-beam type sensor needs two brackets.)
MS-EX10-13L-shaped mounting bracket [Stainless steel (SUS304)]
(The thru-beam type sensor needs two brackets.)
Slit maskOS-EX10-12
(Slit size ø1.2 mm ø0.047 in)		Slit on one side・Sensing range:
600 mm 23.622 in [EX-19□]
250 mm 9.843 in [EX-13□, EX-17□]
・Min. sensing object: ø2 mm ø0.079 in
Slit on both sides・Sensing range:
400 mm 15.748 in [EX-19□]
200 mm 7.874 in [EX-13□, EX-17□]
・Min. sensing object: ø1.2 mm ø0.047 in
OS-EX10-15
(Slit size ø1.5 mm ø0.059 in)		Slit on one side・Sensing range:
800 mm 31.496 in [EX-19□]
350 mm 13.780 in [EX-13□, EX-17□]
・Min. sensing object: ø2 mm ø0.079 in
Slit on both sides・Sensing range:
500 mm 19.685 in [EX-19□]
300 mm 11.811 in [EX-13□, EX-17□]
・Min. sensing object: ø1.5 mm ø0.059 in
OS-EX10E-12
(Slit size ø1.2 mm ø0.047 in)		Slit on one side・Sensing range:
400 mm 15.748 in [EX-19E□](Note 2)
250 mm 9.843 in [EX-13E□, EX-17E□]
・Min. sensing object:
ø1.2 mm ø0.047 in [EX-19E□](Note 2)
ø2 mm ø0.079 in [EX-13E□, EX-17E□]
Slit on both sides・Sensing range:
200 mm 7.874 in [EX-13E□, EX-17E□]
・Min. sensing object: ø1.2 mm ø0.047 in
Mounting screwMS-M2Mounting screws with washers (50 pcs. lot). It can mount securely as it is spring washer attached.

Note
1: Can not be used for the narrow beam type (EX-□S□).
2: Since EX-19E□ has a built-in ø1 mm ø 0.039 in slit in the emitter, be sure to mount it in the receiver.

Sensor mounting bracket

MS-EX10-1
MS-EX10-1

Material: Cold rolled carbon steel (SPCC) (Uni-chrome plated)
Two M2 (length 4 mm 0.157 in) pan head screws are attached.

MS-EX10-11
MS-EX10-11
Material: Stainless steel (SUS304)
Two M2 (length 4 mm 0.157 in) pan head screws [stainless steel (SUS304)] are attached.
MS-EX10-2
MS-EX10-2
Material: Cold rolled carbon steel (SPCC) (Uni-chrome plated)
Two M2 (length 8 mm 0.315 in) pan head screws are attached.
MS-EX10-12
MS-EX10-12
Material: Stainless steel (SUS304)
Two M2 (length 8 mm 0.315 in) pan head screws [stainless steel (SUS304)] are attached.
MS-EX10-3
MS-EX10-3
Material: Cold rolled carbon steel (SPCC) (Uni-chrome plated)
Two M2 (length 4 mm 0.157 in) pan head screws, and two M2 (length 8 mm 0.315 in) pan head screws are attached.
MS-EX10-13
MS-EX10-13
Material: Stainless steel (SUS304)
Two M2 (length 4 mm 0.157 in) pan head screws [stainless steel (SUS304)] and two M2 (length 8 mm 0.315 in) pan head screws [stainless steel (SUS304)] are attached.

Slit mask

OS-EX10-12
OS-EX10-15

OS-EX10-12, OS-EX10-15
OS-EX10E-12
OS-EX10E-12
Example of mounting
(OS-EX10E-12)
Example of mounting
Tighten along with the sensor mounting bracket.

------------------------------ Tab5 showing ------------------------------

Specifications

TypeThru-beam
Front
sensing		Side
sensing		Front
sensing		Side
sensing		Front
sensing		Side
sensing
Model No.
(Note 2)		Light-ONEX-11A
(-PN)		EX-11EA
(-PN)		EX-13A
(-PN)		EX-13EA
(-PN)		EX-19A
(-PN)		EX-19EA
(-PN)
Dark-ONEX-11B
(-PN)		EX-11EB
(-PN)		EX-13B
(-PN)		EX-13EB
(-PN)		EX-19B
(-PN)		EX-19EB
(-PN)
Applicable regulations and certificationsCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), ISO 13849-1 (Category 1, PLc) (Note 3), UL Recognition certification (Note 4)
Sensing range150 mm 5.906 in500 mm 19.685 in1 m 3.281 ft
Min. sensing objectø1 mm ø0.039 in opaque object
(Completely beam interrupted object)
(Setting distance
between emitter
and receiver:
150 mm 5.906 in)		ø2 mm ø0.079 in opaque object
(Completely beam interrupted object)
(Setting distance
between emitter
and receiver:
500 mm 19.685 in)		ø2 mm ø0.079 in
opaque object
(Completely beam
interrupted object)
(Setting distance between
emitter and receiver:
1 m 3.281 ft)
Hysteresis-
Repeatability
(perpendicular to sensing axis)		0.05 mm 0.002 in or less
Supply voltage12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumptionEmitter: 10 mA or less, Receiver: 10 mA or less
Output<NPN output type>
NPN open-collector transistor
・Maximum sink current: 50 mA
・Applied voltage: 30 V DC or less (between output and 0 V)
・Residual voltage: 2 V or less (at 50 mA sink current)
1 V or less (at 16 mA sink current)

<PNP output type>
PNP open-collector transistor
・Maximum source current: 50 mA
・Applied voltage: 30 V DC or less (between output and +V)
・Residual voltage: 2 V or less (at 50 mA source current)
1 V or less (at 16 mA source current)
 Utilization categoryDC-12 or DC-13
Short-circuit protectionIncorporated
Response time0.5 ms or less
Operation indicatorOrange LED (lights up when the output is ON)
Incident beam indicator-
Stability indicatorGreen LED
(lights up under stable light received condition or stable dark condition)
Pollution degree3 (Industrial environment)
ProtectionIP67 (IEC)
Ambient temperature-25 to +55 ℃ -13 to +131 ℉
(No dew condensation or icing allowed),
Storage: -30 to +70 ℃ -22 to +158 ℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminanceIncandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 500 Hz frequency, 3 mm 0.118 in double amplitude in X, Y and Z directions for two hours each
Shock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting elementRed LED [Peak emission wavelength: 680 nm 0.027 mil (EX-19E□: 624 nm 0.025 mil), modulated]
MaterialEnclosure: Polyarylate
Lens: Polyarylate
Cable (Note 5)0.1 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable,
2 m 6.562 ft long
Cable extensionExtension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (thru-beam type: emitter and receiver). (Note 6)
WeightNet weight (each emitter and receiver): 20 g approx.,
Gross weight: 50 g approx.
AccessoriesMounting screws: 1 set

Notes:

1)Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.

2)Model Nos. having the suffix "-PN" are PNP output type.

3)Conformed from December 2021 production.

4)Except 5 m 16.404 ft cable length type. (EX-19E□-C5 is included in the certified products.)

5)The bending-resistant cable type (model Nos. having suffix "-R") has a 0.1 mm2 3-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m 6.562 ft long.

6)For safety applications, do not exceed 30 m 98.425 ft.

TypeConvergent reflective
(Diffused beam type)		Thru-beam ・ with operation mode switch on bifurcation
Front sensingFront sensingSide sensingFront sensingSide sensing
Model No.
(Note 2)		Light-ONEX-14A
(-PN)		EX-15
(Note 3)		EX-15E
(Note 3)		EX-17
(Note 3)		EX-17E
(Note 3)
Dark-ONEX-14B
(-PN)
Applicable regulations and certificationsCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), ISO 13849-1 (Category 1, PLc) (Note 4), UL Recognition certification (Note 5)RoHS Directive, UL Recognition certification (Note 5)
Sensing range2 to 25 mm
0.079to 0.984 in
(Note 6)
(Conv. point: 10 mm 0.394 in)		150 mm 5.906 in500 mm 19.685 in
Min. sensing objectø0.1 mm ø0.004
in copper wire
(Completely beam
interrupted object)
(Setting distance:
10 mm 0.394 in)		ø1 mm ø0.039 in opaque object
(Completely beam interrupted object)
(Setting distance
between emitter
and receiver:
150 mm 5.906 in)		ø2 mm ø0.079 in opaque object
(Completely beam interrupted object)
(Setting distance
between emitter
and receiver:
500 mm 19.685 in)
Hysteresis15 % or less of operation
distance (Note 6)		-
Repeatability
(perpendicular to sensing axis)		0.1 mm 0.004 in or less0.05 mm 0.002 in or less
Supply voltage12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption13 mA or less25 mA or less
Output<NPN output type>
NPN open-collector transistor
・Maximum sink current: 50 mA
・Applied voltage: 30 V DC or less (between output and 0 V)
・Residual voltage: 2 V or less (at 50 mA sink current)
1 V or less (at 16 mA sink current)

<PNP output type>
PNP open-collector transistor
・Maximum source current: 50 mA
・Applied voltage: 30 V DC or less (between output and +V)
・Residual voltage: 2 V or less (at 50 mA source current)
1 V or less (at 16 mA source current)		NPN open-collector transistor
・Maximum sink current: 100 mA
・Applied voltage: 30 V DC or less (between output and 0 V)
・Residual voltage : 2 V or less
(at 100 mA sink current)
1 V or less (at 16 mA sink current)
 Utilization categoryDC-12 or DC-13-
Short-circuit protectionIncorporated
Response time0.5 ms or less
Operation indicatorOrange LED (lights up when the output is ON)Orange LED
(lights up when the output is ON), located on the bifurcation
Incident beam indicator-Red LED (lights up under light received condition),
located on the receiver
Stability indicatorGreen LED
(lights up under stable light received condition or stable dark condition)		Green LED
(lights up under stable light received
condition or stable dark condition), located on the
receiver
Pollution degree3 (Industrial environment)-
ProtectionIP67 (IEC)
Ambient temperature-25 to +55 ℃ -13 to +131 ℉
(No dew condensation or icing allowed),
Storage: -30 to +70 ℃ -22 to +158 ℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminanceIncandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 500 Hz frequency, 3 mm 0.118 in double amplitude in X, Y and Z directions for two hours each
Shock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting elementRed LED (Peak emission wavelength: 680 nm 0.027 mil, modulated)
MaterialEnclosure: Polyarylate
Lens: Polyarylate		Enclosure: Polyarylate
Lens: Polyarylate, Bifurcation: Polyarylate
Cable (Note 7)0.1 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable,
2 m 6.562 ft long		0.2 mm2 3-core cabtyre cable, 2 m 6.562 ft long (beyond bifurcation; from emitter / receiver to bifurcation: 0.5 m 1.640 ft long)
Cable extensionExtension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable (thru-beam type: emitter and receiver).Extension up to total 100 m 328 ft is possible with 0.3 mm2, or more, cable. (Note 8)
WeightNet weight: 20 g approx.
Gross weight: 40 g approx		Net weight: 55 g approx., Gross weight: 80 g approx.
AccessoriesMounting screws: 1 setMounting screws: 1 set, Adjusting screwdriver: 1 pc.

Notes:

1)Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.

2)Model Nos. having the suffix "-PN" are PNP output type.

3)Either Light-ON or Dark-ON can be selected by the operation mode switch.

4)Conformed from December 2021 production.

5)Except 5 m 16.404 ft cable length type.

6)The sensing range and the hysteresis of convergent reflective type sensor are specified for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) as the object.

7)The bending-resistant cable type (model Nos. having suffix "-R") has a 0.1 mm2 3-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m 6.562 ft long.

8)For safety applications, do not exceed 30 m 98.425 ft.

TypeThru-beam
Front sensingSide sensingFront sensingSide sensingFront sensing
Model No.
(Note 2)		Light-ONEX-11SA
(-PN)		EX-11SEA
(-PN)		EX-13SA
(-PN)		EX-13SEA
(-PN)		EX-19SA
(-PN)
Dark-ONEX-11SB
(-PN)		EX-11SEB
(-PN)		EX-13SB
(-PN)		EX-13SEB
(-PN)		EX-19SB
(-PN)
Applicable regulations and certificationsCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), ISO 13849-1 (Category 1, PLc) (Note 3), UL Recognition certification
Sensing range150 mm 5.906 in500 mm 19.685 in1 m 3.281 ft
Min. sensing objectø0.5 mm ø0.020 in
opaque object
(Completely beam interrupted object)
(Note 4)		ø1.0 mm ø0.039 in
opaque object
(Completely beam interrupted object)
(Note 4)		ø2.0 mm ø0.079 in
opaque object
(Completely beam interrupted object)
(Note 4)
Hysteresis-
Repeatability
(perpendicular to sensing axis)		0.05 mm 0.002 in or less
Supply voltage12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumptionEmitter: 10 mA or less, Receiver: 10 mA or less
Output<NPN output type>
NPN open-collector transistor
・Maximum sink current: 50 mA
・Applied voltage: 30 V DC or less (between output and 0 V)
・Residual voltage: 2 V or less (at 50 mA sink current)
1 V or less (at 16 mA sink current)

<PNP output type>
PNP open-collector transistor
・Maximum source current: 50 mA
・Applied voltage: 30 V DC or less (between output and +V)
・Residual voltage: 2 V or less (at 50 mA source current)
1 V or less (at 16 mA source current)
 Utilization categoryDC-12 or DC-13
Short-circuit protectionIncorporated
Response time0.5 ms or less
Operation indicatorOrange LED (lights up when the output is ON)
Incident beam indicator-
Stability indicatorGreen LED
(lights up under stable light received condition or stable dark condition)
Pollution degree3 (Industrial environment)
ProtectionIP67 (IEC)
Ambient temperature-25 to +55 ℃ -13 to +131 ℉
(No dew condensation or icing allowed),
Storage: -30 to +70 ℃ -22 to +158 ℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminanceIncandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 500 Hz frequency, 3 mm 0.118 in double amplitude in X, Y and Z directions for two hours each
Shock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting elementRed LED (Peak emission wavelength: 650 nm 0.026 mil, modulated)
MaterialEnclosure: Polyarylate
Lens: Polyarylate
Cable0.1 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable,
2 m 6.562 ft long
Cable extensionExtension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (thru-beam type: emitter and receiver). (Note 5)
WeightNet weight (each emitter and receiver): 20 g approx.,
Gross weight: 50 g approx.
AccessoriesMounting screws: 1 set

Please note that MS-EX10-□ sensor mounting brackets designed for standard-beam models cannot be used with narrow-beam models.

Notes :

1)Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.

2)Model Nos. having the suffix "-PN" are PNP output type.

3)Conformed from December 2021 production.

4)The min. sensing objects are specified in case the emitter / reciever sensing range is to set the maximum.

5)For safety applications, do not exceed 30 m 98.425 ft.

------------------------------ Tab6 showing ------------------------------

Dimensions

  • Unit: mm in

EX-11□ EX-11S□
EX-13□ EX-13S□
EX-19□ EX-19S□

Sensor

EX-11A□　EX-11B□　EX-13A□　EX-13B□　EX-19A□　EX-19B□ Emitter

EX-11EA EX-11EB EX-13EA EX-13EB Receiver

EX-11E□ EX-11SE□
EX-13E□ EX-13SE□
EX-19E□

Sensor

EX-11EA□, EX-11EB□, EX-13EA□, EX-13EB□, EX-19EA□, EX-19EB□ Emitter

EX-11EA□, EX-11EB□, EX-13EA□, EX-13EB□, EX-19EA□, EX-19EB□　Receiver

EX-15
EX-17

Sensor

EX-15　EX-17

EX-15E
EX-17E

Sensor

EX-15E　EX-17E

EX-14□

Sensor

EX-14A□　EX-14B□

MS-EX10-1

Sensor mounting bracket (Optional)

MS-EX10-1

Material:Cold rolled carbon steel (SPCC) (Uni-chrome plated)Two M2 (length 4 mm0.157 in) pan head screws are attached.

Assembly dimensions

Mounting drawing with EX-14□

MS-EX10-1

MS-EX10-2

Sensor mounting bracket (Optional)

MS-EX10-2

Material:Cold rolled carbon steel (SPCC) (Uni-chrome plated)Two M2 (length 8 mm0.315 in) pan head screws are attached.

Assembly dimensions

Mounting drawing with EX-11E□ and EX-13E□

MS-EX10-2

MS-EX10-3

Sensor mounting bracket (Optional)

MS-EX10-13

Material:Cold rolled carbon steel (SPCC) (Uni-chrome plated)Two M2 (length 4 mm0.157 in) pan head screws and two M2 (length 8 mm0.315 in) pan head screws are attached.

Assembly dimensions

Mounting drawing with EX-14□

MS-EX10-13

MS-EX10-11

Sensor mounting bracket (Optional)

MS-EX10-11

Material: Stainless steel (SUS304)Two M2 (length 4 mm0.157 in) pan head screws [stainless steel (SUS304)] are attached.

Assembly dimensions

Mounting drawing with EX-14□

MS-EX10-11

MS-EX10-12

Sensor mounting bracket (Optional)

MS-EX10-12

Material:Stainless steel (SUS304)Two M2 (length 8 mm0.315 in) pan head screws [stainless steel (SUS304)] are attached.

Assembly dimensions

Mounting drawing with EX-11E□ and EX-13E□

MS-EX10-12

MS-EX10-13

Sensor mounting bracket (Optional)

MS-EX10-13

Material:Stainless steel (SUS304)Two M2 (length 4 mm0.157 in) pan head screws [stainless steel (SUS304)] and two M2 (length 8 mm0.315 in) pan head screws [stainless steel (SUS304)] are attached.

Assembly dimensions

Mounting drawing with EX-14□

MS-EX10-13

------------------------------ Tab7 showing ------------------------------

I/O Circuit and Wiring diagrams

EX-11□, EX-11S□, EX-13□, EX-13S□, EX-19□, EX-19S□, EX-14□

NPN output type

I/O circuit diagram

NPN output type EX-11□ EX-13□ EX-19□ EX-14□ I/O circuit diagram

Note:The emitter of the thru-beam type sensor does not incorporate the output.

Symbols･･･

D1: Reverse supply polarity protection diode
D2: Reverse output polarity protection diode
ZD: Surge absorption zener diode
Tr : NPN output transistor


Wiring diagram

NPN output type EX-11□ EX-13□ EX-19□ EX-14□ Wiring diagram

Note:The emitter of the thru-beam type sensor does not incorporate the black wire.



EX-11□-PN, EX-11S□-PN, EX-13□-PN, EX-13S□-PN, EX-19□-PN, EX-19S□-PN, EX-14□-PN

PNP output type

I/O circuit diagram

PNP output type EX-11□-PN EX-13□-PN EX-19□-PN EX-14□-PN I/O circuit diagram

Note:The emitter of the thru-beam type sensor does not incorporate the output.

Symbols･･･

D1: Reverse supply polarity protection diode
D2: Reverse output polarity protection diode
ZD: Surge absorption zener diode
Tr : PNP output transistor

Wiring diagram

PNP output type EX-11□-PN EX-13□-PN EX-19□-PN EX-14□-PN Wiring diagram

Note:The emitter of the thru-beam type sensor does not incorporate the black wire.



EX-15□, EX-15E□, EX-17□, EX-17E□

NPN output type

I/O circuit diagram

NPN output type EX-15□ EX-15E□ EX-17□ EX-17E□ I/O circuit diagram

Symbols･･･

D1: Reverse supply polarity protection diode
D2: Reverse output polarity protection diode
ZD: Surge absorption zener diode
Tr : NPN output transistor

Wiring diagram

NPN output type EX-15□, EX-15E□, EX-17□, EX-17E□ wiring diagram

------------------------------ Tab8 showing ------------------------------

Sensing characteristics

*TYPICAL

EX-11□, EX-11E□, EX-15□, EX-15E□

Thru-beam type

EX-11□ EX-11E□ EX-15□ EX-15E□ Parallel deviation, Angular deviation

*Optical properties of side sensing types (EX-□E□)
Due to the optical properties of side sensing types, note that sensing may be affected if multiple sensors are positioned in such a way that optical axes intersect as shown in the diagram below.

EX-11□ EX-11E□ EX-15□ EX-15E

EX-13□, EX-13E□, EX-17□, EX-17E□

Thru-beam type

EX-13□ EX-13E□ EX-17□ EX-17E□ Parallel deviation, Angular deviation

EX-13□ EX-13E□ EX-17□ EX-17E□ Parallel deviation with slit masks (ø1.2 mm ø0.047 in), Parallel deviation with slit masks (ø1.5 mm ø0.059 in)

EX-19□

Thru-beam type

EX-19□ Parallel deviation, Angular deviation

EX-19□ Parallel deviation with slit masks (ø1.2 mm ø0.047 in), Parallel deviation with slit masks (ø1.5 mm ø0.059 in)

EX-19E□

Thru-beam type

EX-19E□ Parallel deviation

EX-11S□/EX-11SE□

Thru-beam type

EX-11S□/EX-11SE□ Parallel deviation

EX-13S□/EX-13SE□

Thru-beam type

EX-13S□/EX-13SE□ Parallel deviation

EX-19S□

Thru-beam type

EX-19S□ Parallel deviation

EX-14□

Convergent reflective type

EX-14□ Sensing fields Horizontal (left and right) direction, Vertical (up and down) direction

Correlation between lightness and sensing range

EX-14□ Sensing fields Vertical (up and down) direction

The sensing region (typical) is represented by oblique lines in the left figure. However, the sensitivity should be set with enough margin because of slight variation in products.
(Lightness shown on the left may differ slightly from the actual object condition.)

Correlation between material (50 × 50 mm 1.969 × 1.969 in) and sensing range

EX-14□ Correlation between material (50 × 50 mm 1.969 × 1.969 in) and sensing range

The bars in the graph indicate the sensing range (typical) for the respective material.
However, there is a slight variation in the sensing range depending on the product.
Further, if there is a reflective object (conveyor, etc.) in the background of the sensing object, since it affects the sensing, separate it by more than twice the sensing range shown in the left graph.

------------------------------ Tab9 showing ------------------------------

Cautions For Use

  • Do not use this product for an application where it directly detects the human body. Otherwise, there is a risk of death or serious injury.
  • Do not use the EX-15□/EX-17□ for an application either where it directly detects the human body or where it indirectly protects the human body. Otherwise, there is a risk of death or serious injury.
  • When the human body needs to be detected for safety application, use products that conform to the laws and standards related to human body detection for safety application in each country, such as OSHA, ANSI, and IEC.
  • This product is not a safety sensor designed or intended to protect life and prevent bodily injury or property damage from dangerous parts of machinery.
  • This product conforms to the international standard ISO 13849-1 (Category 1, PLc) and can be used as a detection device to indirectly protect the human body.(Excluding EX-15 □ / EX-17 □)
  • When using this product as a part of the safety system, observe the precautions summarized in the "EX-10 series Users Manual" . The "EX-10 series Users Manual" explains important rules that must be observed to prevent personal injury and property damage when using the product as a part of the safety system. The "EX-10 series Users Manual" can be downloaded from the following website.
  • >>Go to Data download.

Mounting

• In case of mounting on tapped holes (Unit: mm in)

In case of mounting on tapped holes (Unit: mm in)

The tightening torque should be 0.2 N·m or less.

• In case of using attached screws and nuts (Unit: mm in)

In case of using attached screws and nuts (Unit: mm in)

The tightening torque should be 0.2 N·m or less.

Operation mode switch

(EX-15□, EX-15E□, EX-17□ and EX-17E□ only)

Operation mode switch

Switch
position		Description

Light-ON mode is set when the switch is turned fully clockwise (L side).

Dark-ON mode is set when the switch is turned fully counterclockwise (D side).

Others

  • This product has been developed / produced for industrial use only.
  • This product is suitable for indoor use only.
  • Do not use during the initial transient time (50 ms) after the power supply is switched on.
  • Excess bending of the cable or stress applied to the cable may disconnect the internal lead wire.

MENU

Recently checked products

Recently checked product numbers