Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

BE-A201｜For small diameter tubes Optical Bubble Sensor BE-A

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

BE-A201

Part Number

BE-A201

Product

For small diameter tubes Optical Bubble Sensor

Details

for ø2 mm ø0.078 in tube

Product Name

 For small diameter tubes Optical Bubble Sensor BE-A

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberBE-A201
Product NumberBE-A201
Products NameFor small diameter tubes Optical Bubble Sensor
Product detailsfor ø2 mm ø0.078 in tube
Detectable air gap0.8 mm 0.032 in or more
(Note) Sensing air gap refers to the width of an air bubble formed in the entire area of the inner diameter of the tube. Please note that this product cannot sense very small air bubbles or water drops.
Sensing objectLiquid
(Note) Sensing is affected by dirt or residues adhered to the inner wall of the tube. Please maintain the tube regularly.
Applicable tube dia. (OD×ID)ø2 mm × ø1 mm
ø0.078 in × ø0.039 in
(Note) When using a tube out of specifications or it doesn't have a smooth surface, please test sensing on the actual machine before use.
Applicable tube typeTransparent resin tube (equivalent to PFA)
(Note) When using a tube out of specifications or it doesn't have a smooth surface, please test sensing on the actual machine before use.
Supply voltage5 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption15 mA or less
Output (Incorporated with 2 outputs)NPN open-collector transistor
•Maximum sink current: 50 mA
•Applied voltage: 30 V DC or less (between output and 0 V)
•Residual voltage: 2 V or less (sink current at 50 mA) 1 V or less (sink current at 16 mA)
Output (Incorporated with 2 outputs):Output operationSwitchable either Liquid-absent-ON or Liquid-present-ON
Output (Incorporated with 2 outputs):Short-circuit protectionIncorporated
Response time:When detecting bubble30 μs or less
(Note) Actual response time may differ from specification (typical example using applicable tube) due to dimension, light transmission or surface state of test tube in use.
Response time:When detecting liquid80 μs or less
(Note) Actual response time may differ from specification (typical example using applicable tube) due to dimension, light transmission or surface state of test tube in use.
Operation indicatorOrange LED (lights up with absent liquid)
Protection circuitsPower supply reverse polarity protection , Output reverse polarity protection
Environmental resistance : ProtectionIP40 (IEC)
Environmental resistance : Ambient temperature-25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +80 ℃ -22 to +176 ℉
(Note) Liquid being detected should also be kept within the rated ambient temperature range.
Environmental resistance : Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Environmental resistance : Ambient illuminanceFluorescent light: 1,000 ℓx at the light-receiving face
Environmental resistance : Voltage withstandability1,000 V AC for between one min. between all supply terminals connected together and enclosure
Environmental resistance : Insulation resistance20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Environmental resistance : Vibration resistance10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude or maximum acceleration 49 m/s2, in X, Y and Z directions for two hours each
Environmental resistance : Shock resistance100 m/s2 acceleration in X, Y, and Z directions three times each
Emitter elementInfrared LED(Peak emission wavelength: 855 nm 0.034 mil, non-modulated)
MaterialEnclosure: PBT, Tube holder: Polyamide, Indicator: Polycarbonate
Cable0.09 mm2 4-core cabtyre cable 1 m 3.280 ft
Cable extensionExtension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
(Note)Confirm that the power supply voltage at the end of cable is more than 4.5 V when using an extension of over 20 m 65.167 ft.
Clamping torque0.5N•m or less
WeightNet weight: 15 g approx., Gross weight: 25 g approx.
Compliant regulationCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)

MENU

Recently checked products

Recently checked product numbers