Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

PM-T54P｜Small U-shaped Micro Photoelectric Sensor[Amplifier Built-in] PM-44/PM-54(Discontinued)

Download

Discontinued

Last time buy (JST)

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Product Number

    PM-T54P

    Part Number

    PM-T54P

    Product

    Small U-shaped Micro Photoelectric Sensor[Amplifier Built-in] PM-44/PM-54

    Details

    Small With connector T type

    Product Name

    		 Small U-shaped Micro Photoelectric Sensor[Amplifier Built-in] PM-44/PM-54(Discontinued)
    Substitute
    Sub Prod No.
    Sub Part No.
    Remark

    Spec Detail

    ItemSpecifications
    Part NumberPM-T54P
    Product NumberPM-T54P
    Products NameSmall U-shaped Micro Photoelectric Sensor[Amplifier Built-in] PM-44/PM-54
    Product detailsSmall With connector T type
    The price of the productPlease contact our office
    Sensing range5 mm 0.197 in (fixed)
    Minimum sensing object0.8 x 1.8 mm 0.031 x 0.071 in opaque object
    Hysteresis0.05 mm 0.002 in or less
    Repeatability0.03 mm 0.001 in or less
    Supply voltage5 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
    Current consumption15 mA or less
    OutputPNP open-collector transistor
    Maximum source current: 50 mA
    Applied voltage: 30 V DC or less (between output and + V)
    Residual voltage: 0.7 V or less (at 50 mA source current), 0.4 V or less (at 16 mA source current)
    Output:Output operationIncorporated with 2 outputs: Light-ON / Dark-ON
    Response timeUnder light received condition: 20 micros or less
    Under light interrupted condition: 100 micros or less
    (Response frequency: 1 kHz or more)
    Operation indicatorVermilion LED (lights up under light received condition)
    Ambient temperature-25 to +55 degrees -13 to +131degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +80 degrees -22 to +176degrees Fahrenheit
    (Note) Used at an ambient temperature of +50 degrees +122degrees Fahrenheit, or more, make sure to mount it on a metal body.
    Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
    Ambient illuminanceFluorescent light: 1,000 lx at the light-receiving face
    Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
    Insulation resistance50 MOhm, or more, with 250 V DC megger between all supply terminals connected together and enclosure
    Vibration resistance10 to 2,000 Hz frequency, 1.5 mm 0.059 in amplitude in X, Y and Z directions for two hours each
    Shock resistance15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions for three times each
    Emitting elementInfrared LED (Peak emission wavelength: 940 nm 0.037 mil, non-modulated)
    MaterialEnclosure: PBT, Slit cover: Polycarbonate, Terminal part[PM-*54(P) only]: Solder plated
    Cable-
    Wiring lengthExtension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
    WeightNet weight: 3 g approx.

    MENU

    Recently checked products

    Recently checked product numbers