Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

SC-GU1-485｜Upper Communication Unit for Digital Sensors SC-GU1-485

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

SC-GU1-485

Part Number

SC-GU1-485

Product

Upper Communication Unit for Digital Sensors

Details

Main unit

Product Name

 Upper Communication Unit for Digital Sensors SC-GU1-485

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberSC-GU1-485
Product NumberSC-GU1-485
Products NameUpper Communication Unit for Digital Sensors
Product detailsMain unit
The price of the productPlease contact our office
Applicable sensorFX-501(P), FX-502(P), LS-403, DPS-401(P), DPS-402(P), SC-T1JA
Number of units connectableMax. 16 units of digital sensor / analog input unit per SC-GU1-485(Note：The maximum number of units is 12 for configurations including either the FX-501(P)/502(P) or LS-501(P).)
Connectable nodesMax. 31 nodes
Supply voltage24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption45 mA or less (SC-GU1-EU: 10 mA or less)
Communication methodTwo-wire half duplex communication
Communication speed57,600 bps / 38,400 bps / 19,200 bps / 9,600 bps, Selectable by DIP switch
Synchronization methodAsynchronous communication method
Electrical characteristicConforming to EIA RS-485
Total extension lengthCommunication cable: 100 m 328.084 ft or less [SC-GU1-485 (termination) to PLC]
Power supply cable: Less than 10 m 32.808 ft
Indicators:Power (POWER)Green LED (Lights up when the power is ON)
Indicators:Communication (COMM)Green LED (Lights up during communication)
Indicators:Upper communication error (C.Err)Red LED [Blinks when communication error between PLC (Programmable Logic Controller) and Master or Master and Slave, or command error occurs]
Indicators:Lower communication error (S.Err)Red LED (Blinks when communication error between the main unit and sensors occur)
Ambient temperature–10 to +55 ℃ +14 to +131 ℉
(If 4 to 7 units are connected in cascade: –10 to +50 ℃ +14 to +122 ℉, if 8 to 16 units are connected in cascade: –10 to +45 ℃ +14 to +113 ℉)
(No dew condensation or icing allowed),
Storage: –20 to +70 ℃ –4 to +158 ℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 150 Hz frequency, 0.75 mm double amplitude or maximum acceleration 49 m/s2 in X, Y, and Z direction for 2 hours each
Shock resistance98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each
MaterialEnclosure: Heat-resistant ABS
Connector cap: silicone rubber
WeightNet weight : 35 g approx. (SC-GU1-EU: 10 g approx.)
Gross weight: 120 g approx.
AccessorySC-GU1-EU (End unit): 1 pc.
CN-73-C2 [Quick-connection cable (cable length 2 m 6.562 ft)]: 1 pc.
SC-GU1-CC02 [Link cable (cable length 0.2 m 0.656 ft)]: 1 pc.

MENU

Recently checked products

Recently checked product numbers