Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

FX-551P｜Digital Fiber Sensor FX-550

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

FX-551P

Part Number

FX-551P

Product

Digital Fiber Sensor

Details

Amplifiers Connector type

Product Name

 Digital Fiber Sensor FX-550

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberFX-551P
Product NumberFX-551P
Products NameDigital Fiber Sensor
Product detailsAmplifiers Connector type
Applicable regulationsCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Supply voltage12 to 24 V DC +10-15 % Ripple P-P 10 % or less
Power consumptionNormal operation : 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)
ECO mode : 680 mW or less (current consumption 28 mA or less at 24 V supply voltage)
Output<PNP output type>
PNP open-collector transistor
・Maximum source current : 100 mA
・Applied voltage : 30 V DC or less (between output and +V)
・Residual voltage : 2 V or less (Note) (at maximum source current)
(Note): In case of using the quick-connection cable (cable length 5 m 16.404 ft)(optional).
Output:Output operationSwitchable either Light-ON or Dark-ON by L/D mode
Output:Short-circuit protectionIncorporated
Response timeFAST : 60μs or less, STD : 250μs or less, LONG : 2ms or less, U-LG : 4ms or less, HYPR : 24ms or less, selectable
Sensitivity setting2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment
Incident light sensitivity settingIncorporated, 4 steps
Incident light intensity display rangeFAST / STD : 0 to 4,000, LONG : 0 to 8,000, U-LG / HYPR : 0 to 9,999
Timer functionIncorporated with variable OFF-delay / ON-delay / One-shot / switchable either effective or ineffective
Timer function:Timer periodTimer range "ms" : 1 to 9,999 ms approx., 1 ms approx., Timer range "sec." : 1 to 32 s approx., 1 s approx.,
Timer range "1/10 ms" : 0.1 to 999.9 ms approx., 0.1 ms approx.
(Note): When set to LONG, U-LG, HYPR, IP-F or IP-R, the time range cannot be set to 1/10 ms.
Different frequency interference prevention functionIncorporated (up to 4 units). Note that the response time varies depending on the setting.
F-1 : 0.8 ms or less, F-2 : 0.9 ms or less, F-3 : 1.0 ms or less, F-4 : 1.7 ms or less
(Note): This function increases the hysteresis. Check the sensing condition when using the function.
ProtectionIP40(IEC)
Ambient temperature-10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are mounted in cascade : -10 to +50 ℃ +14 to +122 ℉ or if 8 to 16 units
are mounted in cascade : -10 to +45 ℃ +14 to +113 ℉)(No dew condensation or icing allowed), Storage : -20 to +70 ℃ -4 to +158 ℉
Vibration resistance10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each
Emitting element (modulated)Red LED (Peak emission wavelength : 660 nm 0.026 mil)
MaterialEnclosure, Case cover : Polycarbonate, Switch : Polyacetal
Cable-
Cable extension-
WeightNet weight : 15 g approx., Gross weight : 55 g approx.
RemarkWhere measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.

MENU

Recently checked products

Recently checked product numbers