Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

DPS-401｜Head-separated Dual Display Digital Pressure Sensor [For Gas] DPS-400 / DPH-100

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

DPS-401

Part Number

DPS-401

Product

Head-separated Dual Display Digital Pressure Sensor [For Gas]

Details

Controller

Product Name

 Head-separated Dual Display Digital Pressure Sensor [For Gas] DPS-400 / DPH-100

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberDPS-401
Product NumberDPS-401
Products NameHead-separated Dual Display Digital Pressure Sensor [For Gas]
Product detailsController
CE marking directive complianceEMC Directive, RoHS Directive
Applicable sensor headCompound pressure : DPH-101□
Vacuum pressure : DPH-103□
Rated pressure rangeCompound pressure : -100.0 to +100.0kPa
Vacuum pressure : 0 to -101kPa
Display / set pressure rangeCompound pressure : -199.9 to +199.9 kPa
Vacuum pressure : +101.3 to -101.3 kPa
Supply voltage12 to 24 V DC ±10 % Ripple P-P 10 % or less
Power consumptionNormal operation : 650 mW or less (Current consumption 25 mA or less at 24 V supply voltage)
ECO mode : 500 mW or less (Current consumption 20 mA or less at 24 V supply voltage)
(Note): Excluding current consumption of the applicable pressure sensor head.
Sensor head supply voltageSame as supply voltage
Sensor head inputInput voltage range : 1 to 5 V DC (over rated pressure range)
Comparative outputNPN open-collector transistor
・Maximum sink current : 50 mA (Note 1)
・Applied voltage : 30 V DC or less (between comparative output and 0 V)
・Residual voltage : 1.5 V or less (Note 2) [at 50 mA (Note 1) sink current]
(Note 1): 25 mA max. if 5 or more controllers are connected together.
(Note 2): In case of using the quick-connection cable (cable length : 5 m 16.404 ft)(optional)
Comparative output：Output operationNO / NC, selectable by jog switch
Comparative output:HysteresisMinimum 0 digit, variable by hysteresis setting
Comparative output:RepeatabilityWith compound pressure type connected : within ±0.2 % F.S. (±4 digits), With vacuum / positive pressure type connected : within ±0.2 % F.S. (±2 digits)
Comparative output:Response time150 μs, 500 μs, 1 ms, 5 ms, 10 ms, 50 ms, 100 ms, 500 ms, selectable by jog switch
Ambient temperature-10 to +50℃ +14 to +122℉ (cascading 8 to 16 controllers : -10 to +45℃ +14 to +133℉)(No dew condensation or icing allowed), Storage : -20 to +70℃ -4 to +158℉
Ambient humidity35 to 85 % RH, Storage : 35 to 85 % RH
Temperature characteristicsOver ambient temperature range -10 to +50℃ +14 to +122℉ : within ±0.5 % F.S. of pressure at +25℃ +77℉
MaterialEnclosure : Heat-resistant ABS, Protective cover : Polycarbonate, Jog switch : ABS, MODE key : Acrylic
WeightNet weight : 20 g approx.
Remark・Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20℃ +68℉.
・The cable for controller connection is not supplied as an accessory. Make sure to use the quick-connection cables (optional) given below.
Main cable (4-core) : CN-74-C1 (cable length : 1m 3.281 ft), CN-74-C2 (cable length : 2 m 6.562 ft), CN-74-C5 (cable length : 5 m 16.404 ft)
Sub cable (2-core) : CN-72-C1 (cable length : 1m 3.281 ft), CN-72-C2 (cable length : 2 m 6.562 ft), CN-72-C5 (cable length : 5 m 16.404 ft)
・The values specified above are applied only to the controller.

MENU

Recently checked products

Recently checked product numbers