{lead}
{name}
  • {name}
  • 日本語
  • English (Global)
  • English (Asia Pacific)
  • 简体中文
  • 繁體中文
  • 한국어
▼
Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

DP-102-E-P｜Dual Display Digital Pressure Sensor [For Gas] DP-100

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

DP-102-E-P

Part Number

DP-102-E-P

Product

Dual Display Digital Pressure Sensor [For Gas]

Details

Standard pressure port type

Product Name

 Dual Display Digital Pressure Sensor [For Gas] DP-100

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberDP-102-E-P
Product NumberDP-102-E-P
Products NameDual Display Digital Pressure Sensor [For Gas]
Product detailsStandard pressure port type
Regulatory compliance and certificationCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Type of pressureGauge pressure
Rated pressure range-0.100 to +1.000 MPa
Set pressure range-0.101 to +1.010 MPa
-101 to +1,010 kPa
-1.03 to +10.30 kgf/cm2
-1.01 to +10.10 bar
-14.6 to +146.4 psi
Pressure withstandability1.5 MPa
Applicable fluidNon-corrosive gas
Supply voltage12 to 24 V DC ±10 % Ripple P-P 10 % or less
Power consumptionNormal operation :
720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)
ECO mode :
480 mW or less at STD (Current consumption 20 mA or less at 24 V supply voltage)
360 mW or less at FULL (Current consumption 15 mA or less at 24 V supply voltage)
Comparative output<PNP output>
PNP open-collector transistor
- Maximum source current : 100 mA
- Applied voltage : 30 V DC or less (between comparative output and +V)
- Residual voltage : 2 V or less (at 100 mA source current)
Comparative output : Output operationNO / NC (selectable by key operation)
Comparative output : Output modesEASY mode / Hysteresis mode / Window comparator mode
Comparative output : HysteresisMinimum 1 digit (variable)(however, 2 digits when using psi unit)
Comparative output : Repeatability±0.2 % F.S.
(within ±2 digits)
Comparative output : Response time2.5 ms, 5 ms, 10 ms, 25 ms, 50 ms, 100 ms, 250 ms, 500 ms, 1,000 ms, 5,000 ms, selectable by key operation
Comparative output : Short-circuit protectionIncorporated
External input-
Analog voltage output-
Analog current output-
Display4 digits + 4 digits 3-color LCD display
(Display refresh rate : 250 ms, 500 ms, 1,000 ms, selectable by key operation)
Display : Displayable pressure range-0.101 to +1.010 MPa
-101 to +1,010 kPa
-1.03 to +10.30 kgf/cm2
-1.01 to +10.10 bar
-14.6 to +146.4 psi
IndicatorOrange LED
(Comparative output 1 operation indicator, comparative output 2 operation indicator : Lights up when each comparative output is ON)
ProtectionIP40 (IEC)
Ambient temperature-10 to +50 ℃ +14 to +122 ℉, Storage : -10 to +60 ℃ +14 to +140 ℉
Ambient humidity35 to 85 % RH (No dew condensation or icing allowed), Storage : 35 to 85 % RH
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance50MΩ or more with 500 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 500 Hz frequency, 3 mm 0.118 in double amplitude or maximum acceleration 196 m/s2, in X, Y and Z directions for two hours each
(when panel is mounted: 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude or maximum acceleration 49 m/s2, in X, Y and Z directions for two hours each)
Shock resistance100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each
Temperature characteristicsWithin ±1 % F.S.
(at +20 ℃ +68 ℉)
Pressure portM5 female thread + G 1/8 male thread
MaterialEnclosure : PBT (glass fiber reinforced), LCD display : Acrylic, Pressure port : Stainless steel (SUS303), Mounting threaded part : Brass (nickel plated), Switch part : Silicone rubber
Connecting methodConnector
Cable lengthTotal length up to 100 m 328.084 ft (less than 30 m 98.425 ft when conforming to CE marking) is possible with 0.3 mm2, or more, cable
WeightNet weight: 40 g approx., Gross weight: 130 g approx.
AccessoriesCN-14A-C2 (Connector attached cable 2 m 6.562 ft): 1pc. (excluding M8 plug-in connector type)

MENU

Recently checked products

Recently checked product numbers