Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

AFPX0L40R｜FP-X0

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

AFPX0L40R

Part Number

AFPX0L40R

Product

FP-X0 Control units

Product Name

 FP-X0

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberAFPX0L40R
Product NumberAFPX0L40R
Products NameFP-X0 Control units

Performance specifications

ItemSpecifications
Controllable I/O points : Control unitDC input: 24 points
Relay output: 12 points
Transistor output: 4 points
Controllable I/O points : When using FP-X E16 expansion I/O units 88 points max. (3 expansion units max.)
Controllable I/O points : When using FP-X E30 expansion I/O units130 points max. (3 expansion units max.)
Controllable I/O points : When using FP0R expansion units 196 points max. (3 expansion units max.)
Programming method/Control methodRelay symbol/Cyclic operation
Program memoryBuilt-in Flash-ROM (Free of backup battery)
Program capacity8 k steps
No. of instruction : Basic commandsApprox. 114 kinds
No. of instruction : High-level commandsApprox. 230 kinds
Processing speed3 k steps: 0.08 μs/step for basic commands, 0.32 μs for high-level commands (MV commands)
After 3 k steps: 0.58 μs/step for basic commands, 1.62 μs for high-level commands (MV commands)
Processing speed : Basic time0.31 to 0.35 ms or less
I/O refreshing + basic timeWhen using E16: 0.4 ms × No. of units
When using E30: 0.5 ms × No. of units
When using FP0 expansion adapters: 1.4 ms + the refreshing time of the FP0 expansion unit
Memory for processing : Relays : External input (X) 1,760 points
(Note) The actual usable points depend on the combination of the hardware.
Memory for processing : Relays : External output (Y) 1,760 points
(Note) The actual usable points depend on the combination of the hardware.
Memory for processing : Relays : Internal relay (R)4,096 points
Memory for processing : Relays : Special internal relay (R)224 points
Memory for processing : Relays : Timer・Counter (T/C)・1,024 points(Note)
・Timer: (1 ms, 10 ms, 100 ms, 1 s) × 32,767
・Counter: 1 to 32,767
(Note) The points of the timer can be added as required.
Memory for processing : Relays : Link relay (L)2,048 points
Memory for processing : Memory area : Data register (DT)8,192 words
Memory for processing : Memory area : Special data register (DT)420 words
Memory for processing : Memory area : Link data register (LD)256 words
Memory for processing : Memory area : File registration (FL)No
Memory for processing : Memory area : Index register (I)14 words (IO to ID)
Differential pointsEquivalent to program capacity
Master control relay (MCR)256 points
Label number (JP+LOOP)256 points
No. of step programs1,000 (Engineering)
No. of subroutines500
No. of interrupt programsInput: 8 programs
timing: 1 program
Sampling traceYes
Comments storageAll of the I/O comments,explanations and block comments can be saved. (Free of backup battery, 328 k bytes)
PLC link functionYes
Constant scanIn unit of 0.5 ms: 0.5 ms to 600 ms
PasswordAvailable (4 or 8 digits)
Upload protectionAvailable
Self-diagnosis functionChecks of the watchdog timer and the program syntax
Program editting during RunAvailable (Capacity modified simultaneously: 512 steps) But comments can be modified during the process.
Downloading during RunAvailable
High-speed counter : Body input1-phase, 4-channel (20 kHz max.) and 2-phase, 2-channel (20 kHz max.)
(Note) The rated voltage is 24 V DC at +25 ℃+77℉. The frequency may fall according to the changes of the voltage, temperature and operating conditions.
(Note) The maximum frequency may vary with the difference of the operating method.
Pulse output/PWM output : Body outputPulse: 2-channel (50 kHz)
or
PWM: 2-channel (3.0 kHz max.)
(Note) The rated voltage is 24 V DC at 25 ℃. The frequency may fall according to the changes of the voltage, temperature and operating conditions.
(Note) The maximum frequency may vary with the difference of the operating method.
Pulse catch input/Interrupt program8 points (High-speed counting and interrupt input included)
Periodical interrupt0.5 ms unit: 0.5 ms to 1.5 sec., 10 ms unit: 10 ms to 30 sec.
Analog input2-channel (For inputting any of the following items in each channel)
Potentiometer input
・Min. resistance value of potentiometer: 5 kΩ
・10-bit resolution (K0 to K1,000)
・Accuracy ± 1.0% F.S.+ accuracy of external reistors
Thermistor input
・For inputting the resistance value of the thermistor (Min. resistance value of external thermistors + external resistance value > 2 kΩ)
・10-bit resolution (K0 to K1,023)
・Accuracy ± 1.0% F.S.+ accuracy of external thermistors
Voltage input
・Absolute max. input voltage: 10 V
・10-bit resolution (K0 to K1,023)
・Accuracy ± 2.5% F.S. (F.S. = 10 V)
Calendar/clockYes
Flash ROM backup : Backup made according to commands of F12 and P13Data memory (8,192 words)
(Note) The allowable writing operation is within 10,000 times. Areas to be held and not held can be specified using the system registers.
Flash ROM backup : Automatic backup when power OFFCounter: 16 points (C1008 to C1023)
Process value of the counter: 16 points (EV1008 to EV1023)
Internal relays: 8 points (WR248 to WR255)
Data memory: 302 words (DT7890 to DT8191)
(Note) The allowable writing operation is within 10,000 times. Areas to be held and not held can be specified using the system registers.
Backup batteryYes (Backup lasting for the whole process)
RS485 communication portNo

General specifications

ItemSpecifications
CE marking directive complianceLow Voltage Directive,EMC Directive,RoHS Directive
Operating temperature0 to +55℃ +32 to +131℉
Storage temperature-40 to +70℃−40 to +158℉
Operating humidity10 to 95% RH (at 25 ℃, no condensation)
Storage humidity10 to 95% RH (at 25 ℃, no condensation)
Withstand voltage2,300 V AC, 1 minute
・Input terminals ⇔ Relay output terminals
・All of the transistor output terminals ⇔ All of the relay output terminals
・All of the input terminals⇔ All of the power supply terminals and functional ground terminals
・All of the relay output terminals ⇔ All of the power supply terminals and functional ground terminals
・All of the transistor output terminals ⇔ All of the power supply terminals and functional ground terminals
1,500 V AC, 1 minute
・Power supply terminals ⇔ Ground terminals
500 V AC, 1 minute
・Input terminals ⇔ Transistor output terminals
(Note) The programmable port, RS485 communication port and the internal digital circuit part are non-insulation type.
(Note) The cut-off current is 5 mA (The default value when shipped from the factory) .
Insulation resistance100 MΩ min. (500 V DC insulation resistance meter)
・Input terminals ⇔ Output terminals
・All of the transistor output terminals ⇔ All of the relay output terminals
・All of the input terminals ⇔ All of the power supply terminals and functional ground terminals
・All of the output terminals ⇔ All of the power supply terminals and functional ground terminals
・Power supply terminals ⇔ Ground terminals
(Note) The programmable port, RS485 communication port and the internal digital circuit part are non-insulation type.
Vibration resistance5 to 8.4 Hz, 3.5 mm amplititude in one direction, 1 scan/1 minute 8.4 to 150 Hz,fixed acceleration of 9.8 m/s2, 1 scan/1 minute 10 minutes in X,Y,Z direction each
Shock resistance147 m/s2, 4 times in X, Y, Z directions each
Noise resistance1,500 V [p-p] pulse width 50 ns, 1 μs (Measured from nosie simulation method AC power supply termianls)
Operating conditionNo corrosive gases or too much dust
Overvoltage classII
Level of contamination 2
WeightNet weight：approx. 530g

Power supply specifications(AC power supply)

ItemSpecifications
Rated voltage100 to 240 V AC
Applied voltage range85 to 264 V AC
Inrush current40A max. (at 240 V AC and 25℃+77℉)
Momentary power off time10 ms (when 100 V AC used)
Frequency50/60 Hz (47 to 63 Hz)
Leakage current0.75 mA max.between the input and protectice ground terminals
Service life of built-in power supply 20000 h (at 55℃+131℉)
FuseBuilt-in (replacement disabled)
Insulation systemTransformer isolation
Screw of terminal blockM3

Power supply specifications(Univeral power supply for intput [output] )

ItemSpecifications
Rated output voltage24 V DC
Applied voltage range21.6 to 26.4 V DC
Rated output current0.3A
Overcurrent protectionYes
(Note) Output short protection is a temporary overcurrent protection. When the short is detected, all the power supplies of PLC will be turned OFF.
If the current load out of this specifi cation is connected and in consecutive over-loaded status, failures may occur.
Screw of terminal blockM3

Input specifications

ItemSpecifications
Insulation methodOptical coupler
Rated input voltage24 V DC
Applied voltage range21.6 V DC to 26.4 V DC
Rated input currentApprox. 3.5 mA (Control uint: X0 to X3)
Approx. 4.3 mA (Control unit: X4 and the following ones)
Input points per common24 points/COM (Input power supply +/- are both available.)
Min. ON voltage/Min. ON current19.2 V DC/3 mA
Max. OFF voltage/Max. OFF current2.4 V DC/1.0 mA
Input impedanceApprox. 6.8 kΩ (Control units: X0 to X3)
Approx. 5.6 kΩ (control unit X4 and the following ones)
Response time : OFF→ONFor X0 to X3
・common input: 1 ms max.
・When setting high-speed counter, pulse catching input and interrupt input: 25 μs max.(Note)
X4 and the following ones
・1 ms max.
(Note) The specifications mentioned above are at rated 24 V DC and operationg temperature of 25℃.
Response time : ON→OFFSame as the above.
Action indicatorLED indication
EN61131-2 application typeTYPE 3 standard (Depending on the above-mentioned specifi cations)

Output specifications(Relay output specifictions)

ItemSpecifications
Insulation methodRelay insulation
Output form1a output (Relay replacement disabled)
Rated control capacity (Resistance load)2A 250 V AC, 2A 30 V DC (per point)
(Note) There are restrictions on the rated current for each output block. Y4 to YFD (12 points) Max. 8A in total.
Output points per common1 point/COM×2, 2 points/COM×1, 4 points/COM×2
Response time : OFF→ONApprox. 10 ms
Response time : ON→OFFApprox. 8 ms
Life : Mechanical20,000,000 times min. (Switching frequency 180 times/minute)
Life : Electrical100,000 times min. (Depending on the rated control capacity, switching frequency of 20 times/minute)
Surge absorberNo
Action indicatorLED indication

Output specifications(Transistor (NPN) output specifications)

ItemSpecifications
Insulation methodOptical coupler
Output methodOpen-collector
Rated load voltage5 to 24 V DC
Allowable range of load voltage4.75 to 26.4 V DC
Max. load current0.5 A
Max. impact current1.5 A
Output points per common4 points/COM
Leakage current at OFF status1 μA max.
Max. voltage drop at ON status0.3 V DC max.
Response time (at 25℃) : OFF→ON5 μs max. (Load current over 15 mA)
Response time (at 25℃) : ON→OFF15 μs max. (Load current over 15 mA)
External power supply (Positive and negative teiminals)Voltage: 21.6 to 26.4 V DC
Current: 15 mA max.
Surge absorberZener diode
Action indicatorLED indication

MENU

Recently checked products

Recently checked product numbers