{lead}
{name}
  • {name}
  • 日本語
  • English (Global)
  • English (Asia Pacific)
  • 简体中文
  • 繁體中文
  • 한국어
▼
Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

LA-511｜Laser Collimated Beam Sensor LA(Discontinued)

Download

Discontinued

Last time buy (JST)

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Product Number

    LA-511

    Part Number

    LA-511

    Product

    Laser Collimated Beam Sensor

    Details

    Class 1 type

    Product Name

    		 Laser Collimated Beam Sensor LA(Discontinued)
    Substitute
    Sub Prod No.
    Sub Part No.
    Remark

    Spec Detail

    ItemSpecifications
    Part NumberLA-511
    Product NumberLA-511
    Products NameLaser Collimated Beam Sensor
    Product detailsClass 1 type
    The price of the productPlease contact our office
    Applicable regulationsEMC Directive, RoHS Directive
    TypeClass 1 type
    Conforming standards / regulationsFDA regulations
    Beam width15 mm 0.591 in
    Sensing range500 mm 19.685 in
    Min. sensing objectø0.1 mm ø0.004 in opaque object
    Repeatability10 micro m 0.394 mil or less
    Supply voltage12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
    Current consumptionEmitter: 35 mA or less, Receiver: 25 mA or less
    Comparative outputNPN open-collector transistor
    -Maximum sink current: 100 mA
    -Applied voltage: 30 V DC or less (between comparative output and 0 V)
    -Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
    Comparative output : Utilization categoryDC-12 or DC-13
    Comparative output : Response time0.5 ms or less
    Comparative output : Output operationON when the incident beam amount is less than the threshold level
    Comparative output : Short-circuit protectionIncorporated
    Analog outputAnalog voltage
    -Output voltage: 1 V (Darkest) to 5 V (Lightest)
    -Output impedance: 75 Ohm
    Analog output : Slew rate8 V/ms or more
    Analog output : Temperature characteristicsWithin plus or minus 0.1 % F.S./degrees (with respect to sensing range at ambient temperature +20 degrees +68 degrees Fahrenheit )
    Remote interlock inputLaser is emitted when it is connected to 0 V, but not emitted when connected to +V or kept open
    Indicators : OperationRed LED (lights up when the comparative output is ON)
    Indicators : Laser emission warningRed LED (lights up when laser is being emitted)
    Indicators : Stable incident beamGreen LED (lights up under the stable light received condition)
    Indicators : Laser beam alignmentYellow LED x 4 (light up when laser beam is misaligned)
    Adjusters : Threshold levelAdjustment of threshold level for the comparative output, 18-turn endless adjuster
    Adjusters : SpanAdjustment of span for the analog voltage output, 18-turn endless adjuster
    Pollution degree3 (Industrial environment)
    Environmental resistance : Ambient temperature0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit
    Environmental resistance : Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
    Environmental resistance : Ambient illuminanceIncandescent light: 10,000 ℓx or less at the light-receiving face
    Insulation resistance20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
    Environmental resistance : Vibration resistance10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
    Environmental resistance : Shock resistance500 m/2 acceleration (50 G approx.) in X, Y and Z directions three times each
    Emitting elementInfrared semiconductor laser diode (Maximum output: 1.7 mW, Peak emission wavelength: 780 nm 0.031 mil)
    Enclosure earthingCapacitor earth
    MaterialEnclosure: Die-cast zinc alloy
    Top cover: PPO
    Front protection cover: Glass
    Cable0.2 mm2 5-core (emitter: 4-core) shielded cable, 3 m 9.843 ft long
    Cable extensionExtension up to total 50 m 164.042 ft is possible, for both emitter and receiver, with 0.3 mm2, or more, cable. (Synchronization wire cannot be extended.)
    (Note) LA-510 and LA-511 are CE compliant and complies with EMC directives. EN 61000-6-2 is the applicable standard that covers immunities relating to use of this product, but in order to comply with this standard, the following conditions must be satisfied.
    -This sensor should be connected less than 10 m 32.808 ft from the power supply.
    -The signal line to connect with this sensor should be less than 30 m 98.425 ft.
    WeightEmitter: 290 g approx., Receiver: 280 g approx.
    AccessoryMS-LA1 (Sensor mounting bracket): 1 set for emitter and receiver
    Adjusting screwdriver: 1 pc.
    Crimp contact: 2 pcs.
    Inspection slip: 1 pc.

    MENU

    Recently checked products

    Recently checked product numbers