{lead}
{name}
  • {name}
  • 日本語
  • English (Global)
  • English (Asia Pacific)
  • 简体中文
  • 繁體中文
  • 한국어
▼
Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

HL-C2C｜Ultra High-speed・High-precision Laser Displacement Sensor HL-C2

Download

Discontinued

Last time buy (JST)

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Product Number

    HL-C2C

    Part Number

    HL-C2C

    Product

    Ultra High-speed High-precision Laser Displacement Sensor

    Details

    Controller

    Product Name

    		 Ultra High-speed・High-precision Laser Displacement Sensor HL-C2
    Substitute
    Sub Prod No.
    Sub Part No.
    Remark

    Spec Detail

    ItemSpecifications
    Part NumberHL-C2C
    Product NumberHL-C2C
    Products NameUltra High-speed High-precision Laser Displacement Sensor
    Product detailsController
    The price of the productPlease contact our office
    Connectale sensor headNumber of connectable units: Max. 2 units.
    Supply voltage24 V DC plus or minus 10 % including ripple 0.5 V (P-P)
    Current consumption500 mA approx. at 2 sensor heads connected
    350 mA approx. at 1 sensor head connected
    (100 mA approx. is additionally required when the mini console is connected)
    Sampling rate10 micro s, 20 micro s, 40 micro s, 100 micro s, 200 micro s, 400 micro s, 1 ms, 2 ms
    Analog output : VoltageVoltage output scale: -5 to +5 V/F.S (initial value)
    Output range during normal status: -10.0 to +10.0 V
    Output at abnormal status: -10.8 V or +10.8 V
    Resolution: 2 mV, Linearity: plus or minus 0.05 % F.S.
    Max. 2 mA, output impedance 50 Ohm , Response delay time: 1.5 micro s/V approx.
    (Note) The linearity is F.S.=20 V to digital measurement value. Response delay time is the period after update of measurement value.
    Analog output : CurrentCurrent output scale: 4 to 20 mA/F.S (initial value)
    Output range during normal status: 2 to 24 mA
    Output at abnormal status: 1 mA or 25 mA
    Resolution: 3 micro A, Linearity plus or minus 0.05% F.S.
    Load impedance: 250 Ohm max., Response delay time: 10 micro s approx.
    (Note) The linearity is F.S.=16 mA to digital measurement value. Response delay time is the period after update of measurement value.
    Alarm outputNPN open-collector transistor
    - Maximum sink current: 100 mA
    - Applied voltage: 30 V DC or less[between alarm output and Common(-)]
    - Residual voltage: 1 V or less(at 100 mA sink current)
    Alarm output : Output operationOpened when the amount of light is insufficient
    Alarm output : Short-circuit protectionIncorporated
    Judgment output (HI, GO, LO)NPN open-collector transistor
    - Maximum sink current: 100 mA
    - Applied voltage: 30 V DC or less[between judgment output to Common(-)]
    - Residual voltage: 1 V or less(at 100 mA sink current)
    Judgment output (HI, GO, LO): Output operationOpened at output operation
    Judgment output (HI, GO, LO) : Short-circuit protectionIncorporated
    Strobe outputNPN open-collector transistor
    - Maximum sink current: 100 mA
    - Applied voltage: 30 V DC or less[between strobe output to Common(-)]
    - Residual voltage: 1 V or less(at 100 mA sink current)
    Strobe output : Output operationOpened at data determination
    Strobe output : Short-circuit protectionIncorporated
    Remote interlock inputLaser emission is delayed when connected to Common (-).
    Laser emission stop at open
    Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less)
    Laser control inputLaser emission is stopped when connected to Common (-).
    Laser is emitted immediately after opened.
    Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less)
    Zero set inputZero set is ON when connected with Common (-).
    Zero set turns to OFF after continuously connected to Common (-) for one second.
    Applied voltage: 30 V DC or less (Leak current: 0.1 mA or less)
    Timing inputON at/during connection to Common (-)(depending on analysis mode)
    Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less)
    Reset inputReset is done when connected to Common (-).
    Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less)
    Memory change inputMemory is specified when connected to Common (-).
    Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less)
    Indicator : PowerGreen LED (lights up at power on)
    Indicator : Sensor head A Laser radiationGreen LED (lights up during or immediately before laser emission of sensor head A)
    Indicator : Sensor head B Laser radiationGreen LED (lights up during or immediately before laser emission of sensor head B)
    Indicator : Alarm 1Red LED (lights up when OUT1 can not be measured due to insufficient amount of light)
    Indicator : Alarm 2Red LED (lights up when OUT2 can not be measured due to insufficient amount of light)
    Environmental resistance : Ambient temperature0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit
    Environmental resistance : Ambient humidity35 to 85 %RH
    Environmental resistance : Vibration resistance10 to 55 Hz frequency (period: 1 min.), 0.75 mm 0.030 in amplitude in X, Y and Z directions for 30 min. each
    Environmental resistance : Shock resistance196 m/s2 acceleration (20 G approx.) in X,Y and Z directions for three times each
    MaterialCase: Polycarbonate
    Weight450 g approx.
    AccessoryUSB cable (2 m 6.562 ft long): 1 pc.
    Short bracket: 1 pc.

    MENU

    Recently checked products

    Recently checked product numbers