Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

LP-M505-S｜3D Control FAYb Laser Marker LP-M(Discontinued)

Download

Discontinued

Last time buy (JST)

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Product Number

    LP-M505-S

    Part Number

    LP-M505-S

    Product

    3D Control FAYb Laser Marker

    Product Name

    		 3D Control FAYb Laser Marker LP-M(Discontinued)
    Substitute
    Sub Prod No.
    Sub Part No.
    Remark

    Spec Detail

    ItemSpecifications
    Part NumberLP-M505-S
    Product NumberLP-M505-S
    Products Name3D Control FAYb Laser Marker
    The price of the productPlease contact our office
    Focal point (focal variable range)220 plus or minus 22 mm 8.661 plus or minus 0.866 in
    Marking field220 x 220 mm 8.661 x 8.661 in
    Marking laserClass 4 Yb fiber laser; lambda = 1,064 nm 0.0419 mil laser
    Marking laser : Average output40 W plus or minus 5 % (pulse oscillation)
    (Note) Output at product processing edge (at configured power of 100, standard factory settings) .
    Guide laser / pointerRed semiconductor laser; lambda = 655 nm 0.026 mil; Class 2 laser: Maximum output 1 mW or less
    Scanning methodX-, Y- and Z-axis directions; 3D scanning method
    Scan speedMaximum 12,000 mm / sec. 472.441 in / sec.
    Character settings (character height, width)0.1 to 220 mm 0.004 to 8.661 in (configurable in 0.001 mm 0.0004 in steps)
    Setting range(linear, proportional,monospaced):Character spacing0 to 220 mm 0 to 8.661 in
    Setting range(linear, proportional,monospaced):Line pitch0 to 220 mm 0 to 8.661 in
    Setting range(arced):Radius0 to 999.999 mm 0 to 39.370 in (configurable in 0.001 mm 0.0004 in steps)
    Setting range(arced):Angle-180degrees to +180degrees (configurable in 0.01degrees steps)
    Setting range(arced):Line pitch radius0 to 220 mm 0 to 8.661 in (configurable in 0.001 mm 0.0004 in steps)
    Logo dataVEC (Note) , DXF, BMP, HPGL, JPEG, AI, EPS
    (Note) File format (logo file) that can be used by the laser marker.
    Marking shapeStraight Line, Propotional, Justify, Arc
    Character typesEnglish uppercase letters, English lowercase letters, numerals, katakana, hiragana, kanji (JIS No. 1 and No. 2 standards), symbols, user-registered characters (up to 50)
    Bar codeCODE39, CODE128, ITF, NW-7, EAN / UPC, GS1 DataBar (GS1 DataBar Limited, GS1 DataBar Stacked, etc.), GS1 composite code (GS1 DataBar Limited CC-A, GS1 DataBar Stacked CC-A, GS1-128 CC-A, etc.)
    2D codeQR Code, Micro QR Code, Data Matrix, GS1 Data Matrix
    Input / output portI/O terminal, I/O connector, interlock connector, displacement sensor input connector, laser gate terminal
    InterfaceEIA-RS-232C, Ethernet
    Displacement sensor inputAnalog current input (4 to 20 mA)
    Cooling methodHead: Naturally air cooling
    Controller: Forced air cooling
    Power supply90-132 V AC, or 180-264 V AC (including voltage fluctuation range of ±10 %) , 50/60 Hz（Auto-switching）
    Power consumption580 VA or less (100 V AC)
    720 VA or less (200 V AC)
    Laser gateEquipped in Head
    Ambient temperature0 to +40 degrees +32 to +104 degrees Fahrenheit ( Controller, Head)(No dew condensation or icing allowed)
    Storage ambient temperature-10 to +60 degrees +14 to +140 degrees Fahrenheit ( Controller, Head)(No dew condensation or icing allowed)
    Ambient humidity35 % to 85 % RH (Controller, Head)(No dew condensation or icing allowed)
    Protection degreeIP64
    (Note) The head is IP64 only in regions where an electrical or optical part is deployed.
    Applicable standardsFDA Regulations, CE Marking (Low Voltage Directive, EMC Directive, RoHS Directive), GB standard, KC mark
    Net weight : Head12 kg
    Net weight : Controller28 kg
    Supported OS:Laser Marker UtilityMicrosoft Windows® 10 Pro (32-bit / 64-bit) / 8.1 Pro (32-bit / 64-bit)
    Note:OS versions of which Microsoft has ended support are excluded.
    Note:To use Export Vec, Adobe® Illustrator® must be installed. Please contact us about the version corresponding to Adobe® Illustrator®. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
    Supported OS:NAVILINK-3D (sold separately)Microsoft Windows® 10 Pro (32-bit / 64-bit) / 8.1 Pro (32-bit / 64-bit)
    Note:OS versions of which Microsoft has ended support are excluded.
    Note:To use Export Vec, Adobe® Illustrator® must be installed. Please contact us about the version corresponding to Adobe® Illustrator®. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

    MENU

    Recently checked products

    Recently checked product numbers