Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

AKS1202｜KS1 Signal Converter(Discontinued)

Download

Discontinued

Last time buy (JST)

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Product Number

    AKS1202

    Part Number

    AKS1202

    Product

    KS1 Signal Converter

    Product Name

    		 KS1 Signal Converter(Discontinued)
    Substitute
    Sub Prod No.
    Sub Part No.
    Remark

    Spec Detail

    ItemSpecifications
    Part NumberAKS1202
    Product NumberAKS1202
    Products NameKS1 Signal Converter
    The price of the productPlease contact our office

    General specifications

    ItemSpecifications
    Rated voltage24 V DC
    Operating voltage range90 to 110 %V of rated voltage (21.6 to 26.4 V DC)
    Inrush current12 A or less
    Current consumption200 mA or less
    Allowed momentary power off time10 ms
    FuseBuilt-in type
    Terminal screwM2
    Ambient temperature0 to 55 degrees
    Storage temperature-20 to +75 degrees
    Ambient humidity30 to 85 % RH (at 20 degrees , non-condensing)
    Breakdown voltage(initial)500 V AC 1 minute, RS485 terminals ⇔ Combined power and ground terminals
    Insulation resistance(initial)100 Mohm or higher (500 V DC using an insulation resistance meter), RS485 terminals ⇔ Combined power and ground terminals
    Vibration resistance10 to 55 Hz, 1 cycle / min.: double amplitude of 0.75 mm, 1 hour on 3 axes
    Shock resistance294 m / s2 or more, 5 times on 3 axes
    Dimensions25 x 60 x 90
    WeightApprox. 80 g

    Communication specifications

    ItemSpecifications
    EthernetInterface: IEEE802.3u, 10BASE-T / 100BASE-TX
    Connector shape: RJ45
    Transmission specifications (Transmission speed): 10 Mbps / 100 Mbps
    Transmission specifications (Transmission method): Base band
    Transmission specifications (Max. segment length): 100 m
    Communication cable: Category 5 UTP cable
    Protocol: Modbus TCP(RTU, ASCII), TCP / IP
    Functions: Auto negotiation function, MDI / MDI-X, Auto crossover function
    RS232CInterface: RS-232C (non-insulated)
    Conversion COM port: COM1 (Note)
    Communication style: 1: 1 communication
    Number of connection units: 1 unit
    Communication method: Full duplex system
    Synchronous system: Synchronous communication method
    Transmission distance: 15 m 49 ft
    Transmission speed: 2,400 / 4,800 / 9,600 / 19,200 / 38,400 / 57,600 / 115,200 bps
    Connection connector quantity: Max. 3
    COM receive time out: Setting range 10 ms to 300 s
    Non-transmission connection cut-off time: Setting range: 0 to 1800 s （Setting value of 0 is not cut off)
    Transmission format (Data length): 8 bit fixed
    Transmission format (Parity): Odd / even / none
    Transmission format (Stop bit): 1 bit / 2 bit
    Transmission format (End code): CR / CR+LF / None
    Serial ⇔ Ethernet conversion format: Command response format
    (Note) COM1 and COM2 can be used simultaneously.
    RS485Interface: RS-485 (insulated)
    Conversion COM port: COM2 (Note 1)
    Communication style: 1: N communication
    Number of connection units: Max. 99 units
    Communication method: Half-duplex operation
    Synchronous system: Synchronous communication method
    Transmission distance:Max. 1,200 m 3,937 ft (Note 2)(Note 3)
    Transmission speed: 2,400 / 4,800 / 9,600 / 19,200 / 38,400 / 57,600 / 115,200 bps
    Connection connector quantity: Max. 3
    COM reception time-out: Setting range 10 ms to 300 s
    Non-transmission connection cut-off time: Setting range: 0 to 1800 s (Setting value of 0 is not cut off)
    Transmission format (Data length): 8 bit fixed
    Transmission format (Parity): Odd / even / none
    Transmission format (Stop bit): 1 bit / 2 bit
    Transmission format (End code): CR / CR+LF / None
    Serial ⇔ Ethernet conversion format: Command response format
    (Note 1) COM1 and COM2 can be used simultaneously.
    (Note 2) When connecting a commercially available device, please confirm operation using the actual device. In some case, the number of stations, transmission distance, and communication speed vary depending on the connected device.
    (Note 3) The values for the transmission distance, communication speed and number of stations should be within the values noted in the graph.

    MENU

    Recently checked products

    Recently checked product numbers