Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

AEBN11112｜EB-N Relays

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

AEBN11112

Part Number

AEBN11112

Details

1 Form A

Product Name

 EB-N Relays

Features

Low height 100 A 48 V DC relay

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberAEBN11112
Product NumberAEBN11112
Product details1 Form A
Terminal shapeScrew terminal
Coil terminal structureLead wire
Terminal structureCu without plating, with hole
Operating functionSingle side stable
Rated coil voltage12V DC
Operate (Set) voltage (at20℃) (Initial)Max. 9V DC
Release (Reset) voltage (at20℃) (Initial)Min. 0.5V DC
Rated operating current [±10%] (at 20℃)0.167 A
Coil resistance [±10%] (at 20℃)72Ω
Rated operating power (at 20℃)2.0W
Usable voltage range10 to 16V DC
Contact arrangement1 Form A
Contact materialAg alloy
Rated switching capacity (resistive)100A 60V DC (Carry, 38 mm2 wire)
Max. carring current100A continuous
300 A 5 sec. (38 mm2 wire) (Carry only)
Min. switching load (resistive)1A 24V DC (at 20℃)
Contact voltage drop (initial)Max. 0.02V (By Voltage drop 6V DC 20A)
Insulated resistance (Initial)Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
Dielectric strength (Between open contacts) (Initial)1,500 V AC for 1min. (detection current: 10 mA)
Dielectric strength (Between contacts and coil) (Initial)2,000 V AC for 1min. (detection current: 10 mA)
Operate (Set) time
(at rated coil voltage) (at 20℃) (Initial)		Max. 50ms (without bounce)
Release (Reset) time
(at rated coil voltage) (at 20℃) (Initial)		Max. 30ms (with no coil protective elements)
Shock resistance: FunctionalFor ON: Min. 490 m/s2 (half-sine shock plus: 11 ms; detection time: 10μs)
For OFF: Min. 147 m/s2 (half-sine shock pulse: 11 ms; detection time: 10μs)
Shock resistance: DestructiveMin. 490 m/s2 (half-sine shock pulse: 6 ms)
Vibration resistance: Functional10 to 200 Hz, 44.1m/s2 (detection time: 10 μs)
Vibration resistance: Destructive10 to 200 Hz, 44.1m/s2
(Time of vibration for each direction; X, Y, Z direction: 4 hours)
Expected life: Mechanical lifeMin. 400,000 operations
(Swiching frequency: 0.5 s ON, 1 s OFF)
Expected life: Electrical life (resistive)2A 60V DC Min. 50,000 operations
(Switching frequency: 5 s ON, 5 s OFF)
Expected life: Switch-off life[Forward direction] 1,500A 60V DC, Min. 1 operation
[Reverse direction] 500A 60V DC, Min. 1 operation
Expected life: Inrush resistance current
(Capacitor; 2000μF)		150A 6V DC, Min. 100,000 operations
Switching frequency: 1 s ON, 2 s OFF
ConditionsAmbient temperature: –40 to +85℃, Humidity: 5 to 85% RH (Avoid icing when using at temperatures lower than 0℃.)
Unit weightApprox. 140 g
Inner carton (pieces)50 pieces / 1 tray
Outer carton (pieces)50

MENU

Recently checked products

Recently checked product numbers