ATX22320SSX｜TX Relays
Download
*Photo may vary from actual product.
This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.
| Product Number | TX2SS-L2-12V-1-X |
|---|---|
| Part Number | ATX22320SSX |
| Details | 2 coil latching type (L2), Surface-mount terminal, 12V DC |
| Product Name | TX Relays |
| Features | 2,000 Vrms dielectric strength, 2 Form C and 2 A relays |
- Download RoHS Compliance Certificate
- Download EU REACH SVHC Report
- A List of Part Numbers in This Series
Contact Us
*Specifications and design of the products are subject to change without notice for the product improvement.
Spec Detail
Specifications and design of the products are subject to change without notice for the product improvement.
| Item | Specifications |
|---|---|
| Part Number | ATX22320SSX |
| Product Number | TX2SS-L2-12V-1-X |
| Product details | 2 coil latching type (L2), Surface-mount terminal, 12V DC |
| Protective construction | Sealed Type |
| Terminal shape | Surface-mount terminal |
| Contact type | AgPd contact (low level load) |
| Contact arrangement | 2 Form C |
| Contact material | Stationary contact: AgPd+Au clad Movable contact: AgPd |
| Operating function | 2 coil latching type (L2) |
| Rated operating power | 200mW |
| Rated coil voltage | 12V DC |
| Set voltage (at20℃) | 75%V or less of nominal voltage (Initial) |
| Reset voltage (at20℃) | 75%V or less of nominal voltage (Initial) |
| Contact rating (resistive load) | 1A, 30V DC |
| Max.switching current | 1A |
| Min. switching capacity | 10μA 10mV DC |
| Breakdown voltage (Initial) : Between open contacts | 1,000 Vrms for 1min. (Detection current: 10mA.) |
| Breakdown voltage (Initial) : Between contact and coil | 2,000 Vrms for 1min. (Detection current: 10mA.) |
| Breakdown voltage (Initial) : Between contact sets | 1,000 Vrms for 1min. (Detection current: 10mA.) |
| Surge withstand voltage (initial): Between open contacts | 1,500 V 10 x 160μs |
| Surge withstand voltage (initial): Between contact and coil | 2,500 V 2 x 10μs |
| Expected life : Mechanical | Min. 100 x 106ope. (Switching frequency: at 180 times/min) |
| Expected life : Electrical | Min. 100 x 103 (1 A 30 V DC resistive) (at 20 cpm) |
| Conditions | Ambient temperature: –40 to +85℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation) |
| Height (mm) | 8.4 |
| Unit weight | Approx. 2 g .071 oz |
| Surface-mount terminal type | SS type |
| Packing style | Tape and reel packing (X) |
| Standard packing: Inner packing (pcs.) | 500 |
| Standard packing: Case (pcs.) | 1000 |
Information on Compliance with Standards
Specifications and design of the products are subject to change without notice for the product improvement.
| Status | Status | Information on Compliance | ||
|---|---|---|---|---|
| UL/C-UL | Approval 認定書(写)を 請求する | File No. | E43149 | |
| Rating | 2A 30V DC Resistive 0.3A 110V DC Resistive 0.5A 125V AC Resistive | |||
| Remarks | Approved by 100,000 operation rating | |||
| Last update | ||||
| CSA | N/A | File No. | - | |
| Rating | - | |||
| Remarks | CSA standard certified by C-UL | |||
| Last update | ||||
| BSI | Approval 認定書(写)を 請求する | File No. | BSI No.VC659956 | |
| Rating | - | |||
| Remarks | basic insulation | |||
| Last update | ||||
| Mark on products* | ||||
* The "Mark on products" field shows the standards' certificate type marked to products. Note that not all certified products have a certificate mark affixed to them.