Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

SC-LG2-CEF-P｜IO-Link Master Unit

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

SC-LG2-CEF-P

Part Number

SC-LG2-CEF-P

Details

For CC-Link IE Field

Product Name

 IO-Link Master Unit

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberSC-LG2-CEF-P
Product NumberSC-LG2-CEF-P
Product detailsFor CC-Link IE Field
Regulatory complianceCE Marking (EMC Regulations, RoHS Regulations)、UKCA Marking (EMC Regulations, RoHS Regulations)
Supply voltage24 V DC+10 -15 %, Ripple P-P 10 % or less
Environmental resistance : Ambient temperature-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉
Environmental resistance : Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Environmental resistance : Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Environmental resistance : Insulation resistance20 MΩ or more with 250 V DC megger between all supply terminals connected together and enclosure
Environmental resistance : Vibration resistance10 to 150 Hz frequency, 0.75 mm 0.03 in double amplitude (10 to 58 Hz), maximum acceleration 49 m/s2, (58 to 150 Hz) in X, Y, and Z directions for two hours each
Environmental resistance : Shock resistance98 m/s2 (10 G approx.) in X, Y, and Z directions three times each
Grounding methodPower supply connector is equipped with a frame ground (F.G.)
RJ45 connector shield: Directly connected to ground terminal
Internal circuit: C coupling, Casing: Floating type
Limit to the number of flash memory save operations100,000
(Note) : This product saves settings in internal flash memory.
MaterialCase: Polycarbonate
Net weightNet weight: 210 g approx., Gross weight: 270 g approx.
AccessoriesPower supply connector: 1 pc.

CC-Link IE Field specifications

ItemSpecifications
Current consumption200 mA or less
Communication methodCC-Link IE Field
Remote station typeIntelligent device station
Network number setting1 to 239 (decimal) [1 to EF (hex)] (0 and 240 or more: Error)
Cyclic transmission
[Maximum number of link points per station]		RX/RY: Maximum 112 points (112 bits) / Maximum 112 points (112 bits)
RWr/RWw: Maximum 132 points (132 words) / Maximum 132 points (132 words)
Transient transmissionFor server function only, message size: 2 kbytes (maximum)
Number of ports1000BASE-T Ethernet port (RJ45)x 2
Station number setting1 to 120 (decimal)(0 and 121 or more: Error)
Communication speed1 Gbps
Communication cableCategory 5e or higher Ethernet cables that satisfy the 1000BASE-T standard
(Double shielded twisted pair cable or straight cable)
(Note) : Use a cable recommended by CC-Link Partner Association.
Transmission line typeLine type, star type (line/star mixed type also possible), ring type
Maximum distance between stations100 m 328.084 ft
Maximum number of stations that can be connected121 (1 master station, 120 slave stations)
Maximum number of stages of cascade connection20

IO-Link specifications

ItemSpecifications
Current consumption150 mA or less (excluding the current consumption of connected IO-Link devices)
Allowable passing current3 A or less
(Note) : Take care that the total consumption current of connected devices and the unit on the IO-Link side does not exceed the allowable passing current.
Power to devices (L+, L-), digital I/O (C/Q), and digital input (DI) are supplied from IO-Link (+V, -V) on the power supply connector.
Communication methodIO-Link V1.0 / V1.1
Number of portse-CON compliant connector port for IO-Link x 8
Communication speedCOM1 (4.8 kbps), COM2 (38.4 kbps), COM3 (230.4 kbps)
Automatically set by IO-Link device
Current supplied to device (L+, L-)Maximum 200 mA per port
(Note) : Take care that the total consumption current of connected devices and the unit on the IO-Link side does not exceed the allowable passing current.
Power to devices (L+, L-), digital I/O (C/Q), and digital input (DI) are supplied from IO-Link (+V, -V) on the power supply connector.
Digital I/O (C/Q)IO-Link mode : Compliance with the IO-Link standard
SIO mode [During input setting] : PNP input (Sink current: Max. 15 mA)
SIO mode [During output setting] : Push-pull output (Drive capacity: Max.100 mA)
(Note 1) : Take care that the total consumption current of connected devices and the unit on the IO-Link side does not exceed the allowable passing current.
Power to devices (L+, L-), digital I/O (C/Q), and digital input (DI) are supplied from IO-Link (+V, -V) on the power supply connector.
(Note 2) : Operation settings for digital I/O (C/Q) and digital input (DI) must be configured with CC-Link IE Field.
If operation settings are not configured, they will not operate.
Digital input (DI)PNP input (Sink current: Max. 15 mA)
(Note 1) : Take care that the total consumption current of connected devices and the unit on the IO-Link side does not exceed the allowable passing current.
Power to devices (L+, L-), digital I/O (C/Q), and digital input (DI) are supplied from IO-Link (+V, -V) on the power supply connector.
(Note 2) : Operation settings for digital I/O (C/Q) and digital input (DI) must be configured with CC-Link IE Field.
If operation settings are not configured, they will not operate.
Communication cableUnshielded
Maximum cable length20 m 65.617 ft
IO-Link connectore-CON compliant connector (4-pin type)
(Note) : For the connectors for connecting devices to this product, purchase simple wire-press connector (e-CON) CN-EP2 (5 pcs. set) or CN-EP3 (5 pcs. set) or the recommended product.

MENU

Recently checked products

Recently checked product numbers